Leaderboard

Externally my AUG is now how I want it. Asside from changing the barrel to a longer one every now and again and the 9mm adaptor I have.. New Rail for my AUG from 3D crafts. Based on the one used by Kalid in Rainbow 6 Siege. (I have the 9mm conversation too just not with me) Parts list.. ASG gearbox (330fps) JG body Custom 16 inch barrel PTS flash hider. Platatac F88/AUG stock mag pouch (rare) 3D printed front tail Valken grip FMA mini Peq Guarder Aimpoint and mount. Rail sling mount FRV tailoring Sling ASG Scorpion EVO sights I have a clone scout light for the front too.

My TM USP with its new XC1 Torch 😎

Here is the most recent update of my TM MTR16 GBB. Still need another optic & need to change the foregrip (the KWA Vector one is all I have), but I love it! Can't really see the carbon fibre outer barrel, but it is there 😉

I have one. Played on an event with it once, so far I like it very much. Some parts of it are made of cheese. The screws for example and only after less than 100 rounds there was the big dent on the thing the hammer hits. Gluing a small rubber there is a must. Mine shoots very nice with the stock parts after a cleanup. Easy 70m torso hits on the test range. My Hi-capa couldn't reach it, only 65m. I'm trying to make it quieter with various methods. It's in progress.

Hi guys/gals hope all is well here is the link to my channel i play mostly north of the uk South Yorkshire area but am always willing to try new fields so feel free to send me any links to any sites you guys/gals recommend and I’ll make a trip down hopefully you guys/gals will take a look and leave a subscribe https://www.youtube.com/channel/UCBStHd9hh7gJ1f4U1L-JzdA cheers guys all the best 🔫🔫🔥🔥

Must admit I think a MOE K2 (if you want to keep that angle) would also be a huge improvement over the TM pistol grip since you've got the brace on there, but good looker regardless. Nice rail and neat + compact Scout setup.

No problem mate I’d like to aim for both the viewers 😂😂😂😂

Don't cha just hate it when 7" is deemed 'slightly too short'... I blame the internet. Looks like a tidy job on the other though 👌

Four 'guys' in there but not a 'gal' in sight.lol Will check out your channel guy 😉 👍 Regards

I suddenly have a major need for a USP with XC1 🤯

I intend on buying one should they come back in to stock anytime soon!

Might hit up Skirmish again this Sunday. Anyone want to join? @Barny @GAMBLE @Badger @EDcase

This was something I was contemplating myself earlier actually. For all intents and purposes they are the same width, with each "Compartment" being the same. But the SMG inserts being open at the bottom allow the smg mags to sit further down into the pouch. I've got two of the Pistol mag inserts and they're good - retention is tight on the mag without being annoying and you can sit the insert down into the pouch quite far so only the baseplate sits proud of the pouch itself. Wouldn't worry about them falling out.

I’ve been eyeing up one of ‘Utility Rigs’ for a while as a cheaper option to throw a bunch of fake leaves and other random assorted shite onto with Shoe Goo (loved the D3CRM and Flatpack combo, didn’t have the heart to deface it). Don’t suppose you know how well the SMG inserts would work for pistol mag retention? The only thing that’s been putting me off is how shallow the pistol mag inserts seem to be, it’s weird that they’ve stitched the bottom... though I guess picking that stitching is another option to have them sit a bit deeper.

General tip for any spiritus and associated clone rigs; put whatever you're gonna carry in to the insert beforehand as mentioned, whether it's 556 mags, SMG, whatever, then kinda bend it in to a curve and push it in. Only the convex side of the velcro will try and stick on the way down and you can just slide a piece of paper/your hand/your Trojan Magnums in there to stop it adhering before the insert is fully home. After 1 or 2 goes you can swap loadouts in seconds.

I don't necessarily need two but I have the FDE and most of the accessories they've released so far look much better on the black version...grrr. Much like you I'm interested in it as a CQB primary, so was actually considering getting this stock: https://www.airsoftworld.net/action-army-aap-01-folding-stock.html Totally agree, I have recently put a cowcow adjustable trigger on my Marui G17 and it's so much nicer.

have you looked at soldier of fortune? they seem to have a couple of sten parts for sale including skeleton stocks. given that the northeast sten is made to the same dimensions as the real steel, these should fit... https://www.sofmilitary.co.uk/sten-gun-no3-mk1-skeleton-stock.html https://www.sofmilitary.co.uk/skeleton-rear-pistol-grip-for-sten-gun.html as for anti corrosion, i havent added anything to the gun myself, and i dont believe the previous owner did either, and while i havent noticed any rust forming on it,i am looking into what anti corrosion products would be suitable i only got the sten a couple of weeks ago from the classifieds here, and havent skirmished it yet as i need to get more mags and suitable mag pouches for the 37 pattern webbing

May help, may not regarding the trigger but kjw glocks and Marui 26 which the kjw is a direct copy of don't have the trigger that stays back but installing the pre-built guarder rear chassis converts them to the newer style action.

@Jaylordofwaargh I think this video says it all. A measured 22 yards.

Equally seem to be buying up somewhat over the past few months. Gone back down the Sniping route, although this time no dressing like a tree & camping! SRS Silverback with full EdGi kit & Longbow internals TM MP5K HC as the sidearm - Absolutely stock but what a decent little gun straight out of the box!

Oooops I did it again. I bought another recoil. Marui AK Storm.