Huxley Posted August 24, 2018 Share Posted August 24, 2018 3 minutes ago, Rogerborg said: Fair play, that doesn't look half bad at all. I give up though, where does the battery go? Inside the suppressor, bit of a ballache getting it back on but you can rear wire them easily. But I'm totally in love with it, trigger feels very snappy. Rogerborg 1 Link to comment Share on other sites More sharing options...
Moderators Tackle Posted August 24, 2018 Moderators Share Posted August 24, 2018 Bit the bullet & bought a g&p tactical ak, first ak in nearly 18 years of playing, needs a little tlc but didn't want to blow my wad on a pricey one only to find ak's aren't my thing. roll on the afuk mall game to give it its first outing😏 Game Cam and CiderPunk 2 Link to comment Share on other sites More sharing options...
Huxley Posted August 24, 2018 Share Posted August 24, 2018 Buckled again, gone and bought an stti mk23. Wanted a 3d printed suppressor but alas he's not running for now. Link to comment Share on other sites More sharing options...
ProPain87 Posted August 24, 2018 Share Posted August 24, 2018 Few parts for the striker, lots more to come 😁 Link to comment Share on other sites More sharing options...
Wo1f Posted August 24, 2018 Share Posted August 24, 2018 Quite possibly the most expensive, well traveled sticker ever Link to comment Share on other sites More sharing options...
Mostly Retired Moderators L3wisD Posted August 25, 2018 Mostly Retired Moderators Share Posted August 25, 2018 9 hours ago, Huxley said: Buckled again, home and bought an stti mk23. Wanted a 3d printed supressor but alas he's not running for now. Fire @Samuraia message, he can 3D print anything you want. He doesn't post on here much anymore, but I've got him on Facebook if he doesn't respond on here. Huxley 1 Link to comment Share on other sites More sharing options...
Huxley Posted August 25, 2018 Share Posted August 25, 2018 12 minutes ago, L3wisD said: Fire @Samuraia message, he can 3D print anything you want. He doesn't post on here much anymore, but I've got him on Facebook if he doesn't respond on here. That might be the same guy, he runs printed airsoft. Link to comment Share on other sites More sharing options...
E21A Posted August 25, 2018 Share Posted August 25, 2018 Flecktarn trousers and ubacs legion forest trousers and tshirt Guarder m120 spring 2x slings and QD sling points triple 40mm grenade pouch lipo bag rail riser MC black backpack minimalist m4 stock rail segments foregrip silcone oil and grease 2 dead rags 2 x used g17 mags Duff 1 Link to comment Share on other sites More sharing options...
Supporters Rogerborg Posted August 25, 2018 Supporters Share Posted August 25, 2018 53 minutes ago, E21A said: 2 dead rags For when you're mostly dead, and all dead? sonofsammo, BigStew, Game Cam and 1 other 1 3 Link to comment Share on other sites More sharing options...
sonofsammo Posted August 25, 2018 Share Posted August 25, 2018 34 minutes ago, Rogerborg said: For when you're mostly dead, and all dead? I'm guessing one for him and one for non hit takers on the other team... Here you go pal, it seems you've lost yours - use mine! On 21/08/2018 at 14:20, StrategyBish said: Russian DTK "Nomad" suppressor Zenitco B-18 for ak2 74u 52,000 0.28 longbow bbs 52,000 rounds ?????? holy buckets of BB's batman!! I realise that's potentially only 1000 per week..... but wowsers, it seems a lot all together! Where did you get 'em from? I'm guessing you must have got a discount for bulk? Picked a nice new sight up. The glass is nice and clear - not too sure on the brightness of the dot yet though. Can't decide which to put it on. Probably stay on the Vector. . . . . . And finally.... a lovely little pistol case. Should do the job nicely... Game Cam and Duff 1 1 Link to comment Share on other sites More sharing options...
E21A Posted August 25, 2018 Share Posted August 25, 2018 36 minutes ago, Rogerborg said: For when you're mostly dead, and all dead? Dead and double dead Duff 1 Link to comment Share on other sites More sharing options...
sonofsammo Posted August 25, 2018 Share Posted August 25, 2018 3 minutes ago, E21A said: Dead and double dead One for when you're shot, two for when you've been shot by Chuck Norris... KendoKhan, E21A and Duff 3 Link to comment Share on other sites More sharing options...
Compulsive Reload Posted August 25, 2018 Share Posted August 25, 2018 1 hour ago, sonofsammo said: I'm guessing one for him and one for non hit takers on the other team... Here you go pal, it seems you've lost yours - use mine! 52,000 rounds ?????? holy buckets of BB's batman!! I realise that's potentially only 1000 per week..... but wowsers, it seems a lot all together! Where did you get 'em from? I'm guessing you must have got a discount for bulk? Picked a nice new sight up. The glass is nice and clear - not too sure on the brightness of the dot yet though. Can't decide which to put it on. Probably stay on the Vector. . . . . . And finally.... a lovely little pistol case. Should do the job nicely... They the asg cz shadows? Or different ones, Any good? ProPain87 and sonofsammo 2 Link to comment Share on other sites More sharing options...
Popular Post ProPain87 Posted August 25, 2018 Popular Post Share Posted August 25, 2018 New short outer barrel for the striker and some bbs. Got a free patch too 👍 threw it on the gun quick to have a look, really like it Huxley, KendoKhan, Nick G and 3 others 3 3 Link to comment Share on other sites More sharing options...
sonofsammo Posted August 25, 2018 Share Posted August 25, 2018 4 hours ago, Compulsive Reload said: They the asg cz shadows? Or different ones, Any good? Yup - They're the ASG CZSP01 Shadows, with threaded outer barrels (the threaded barrels only come as standard on the tactical, but it works out a tenner cheaper to do it yourself - and then you have black guns!). I bought my first after shooting the RS version - I fell in love with it. So as soon as I got back, I bought one. A week later, after only ten rounds, it was dead. The loading nozzle exploded. Which was nice. The retailer swapped it immediately and I ran it in CQB for a few weeks without issue. Then bought another, so that I could run two up, with tracers - which is sooooooo much fun when they work! Have been having feeding problems, which I am yet to get to the bottom of. EXploded BB's jamming the mag and getting jammed around the feed nozzle. Mags venting as a result, at the most inopportune moments. Mags not staying in (due to left over bits of BB, I found).... Lost both front fibre sights already (both guns less than three months old). And yet, despite these issues, I love them. Once I have them working well, I'll love em even more. Duff 1 Link to comment Share on other sites More sharing options...
Compulsive Reload Posted August 25, 2018 Share Posted August 25, 2018 15 minutes ago, sonofsammo said: Yup - They're the ASG CZSP01 Shadows, with threaded outer barrels (the threaded barrels only come as standard on the tactical, but it works out a tenner cheaper to do it yourself - and then you have black guns!). I bought my first after shooting the RS version - I fell in love with it. So as soon as I got back, I bought one. A week later, after only ten rounds, it was dead. The loading nozzle exploded. Which was nice. The retailer swapped it immediately and I ran it in CQB for a few weeks without issue. Then bought another, so that I could run two up, with tracers - which is sooooooo much fun when they work! Have been having feeding problems, which I am yet to get to the bottom of. EXploded BB's jamming the mag and getting jammed around the feed nozzle. Mags venting as a result, at the most inopportune moments. Mags not staying in (due to left over bits of BB, I found).... Lost both front fibre sights already (both guns less than three months old). And yet, despite these issues, I love them. Once I have them working well, I'll love em even more. Seems like alot of trouble haha, love the way they look though. Did you get shut of the c02 mags? Shall stick to my glock for now, just installed maple leaf hop and barrel so should be sweet. Game Cam 1 Link to comment Share on other sites More sharing options...
sonofsammo Posted August 25, 2018 Share Posted August 25, 2018 3 hours ago, Compulsive Reload said: Seems like alot of trouble haha, love the way they look though. Did you get shut of the c02 mags? Shall stick to my glock for now, just installed maple leaf hop and barrel so should be sweet. After those 10 rounds on co2, I went completely gas! I can recommend them. I love them. They just don't love me back..... Link to comment Share on other sites More sharing options...
Pappa Large Posted August 25, 2018 Share Posted August 25, 2018 Thanks to SWAS for the quick delivery of an ARP9. My son loves it. Plus I'm hoping Evike will deliver a ARES PPSH as they have refunded me twice already. Still waiting for a reply as too why? Sent them a couple of emails but nowt. If they refund again then ill probably get another ARP9. Game Cam 1 Link to comment Share on other sites More sharing options...
YorkieT17 Posted August 25, 2018 Share Posted August 25, 2018 My first RIF the G&G CM18 A plate carrier by TMC in Coyote 2 x Hi Cap Stanag type mags by CYMA as a side note anyone got any suggestions on a way to get these Cyma mags to feed. Got all the way home and they don’t want to play at all. 😞 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted August 25, 2018 Supporters Share Posted August 25, 2018 Check the mag is working - fill it, wind it, then pull on the little tab by the opening where the BBs should shoot up from and check they are in fact shooting up and out. If they're working then fill & wind, insert in to the gun, remove, see if some BBs actually fall out of the hop unit. If they're getting up in to the hop unit and there's still nothing firing out of your barrel it might be the tappet plate/nozzle in the gearbox. Link to comment Share on other sites More sharing options...
YorkieT17 Posted August 25, 2018 Share Posted August 25, 2018 1 hour ago, CKinnerley said: Check the mag is working - fill it, wind it, then pull on the little tab by the opening where the BBs should shoot up from and check they are in fact shooting up and out. If they're working then fill & wind, insert in to the gun, remove, see if some BBs actually fall out of the hop unit. If they're getting up in to the hop unit and there's still nothing firing out of your barrel it might be the tappet plate/nozzle in the gearbox. Thanks man. It works ok with the one mid cap I got with the gun just forgot to pick up a speed loader (doh). It didn’t seem to want to fire on the hicap. BBs did fall from the hop unit and BBs did come out of the mag as described. One of them seemed a bit pathetic on ejection but I left it loaded for half an hour while I vented my frustrations and it seemed to improve. Was thinking of leaving it loaded overnight tonight and seeing how it goes in the morning. Luckily it’s buy & sell day tomorrow so hopefully someone is selling some other mags. Otherwise I’ll be coming home early 😩 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted August 25, 2018 Supporters Share Posted August 25, 2018 If the mid works and the hi is lacking oomph, then yeah probably not strong enough feeding. I haven't actually used one for nearly a decade so no idea personally what effect leaving it loaded and wound up will have but hopefully someone can chip in. YorkieT17 1 Link to comment Share on other sites More sharing options...
Supporters Druid799 Posted August 28, 2018 Supporters Share Posted August 28, 2018 On 25/08/2018 at 19:14, Pappa Large said: Thanks to SWAS for the quick delivery of an ARP9. My son loves it. Plus I'm hoping Evike will deliver a ARES PPSH as they have refunded me twice already. Still waiting for a reply as too why? Sent them a couple of emails but nowt. If they refund again then ill probably get another ARP9. More than likely if they do have them in stock (and it is a big if ) then i’d Be inclined to think there probably sending them to to new US orders instead of your’s , there international customer service is atrocious ! They don’t give a flying f**k about foreign customers problems at all ! If you can’t get to the shop to complain or get them on the phone then your at there mercy .😢 Link to comment Share on other sites More sharing options...
Supporters Rogerborg Posted August 28, 2018 Supporters Share Posted August 28, 2018 An Eagle 6 M80 spring and Laylax metal bushings for my AEP. That was pretty nerve wracking getting it all back together, but it's pewing OK on a 7.4V lipo and sounds fairly snappy (hopefully not the gearbox). Notionally that'll be 260fps, which ought to give the chrono chaps a surprise. Link to comment Share on other sites More sharing options...
Guest StrategyBish Posted August 28, 2018 Share Posted August 28, 2018 On 25/08/2018 at 09:29, sonofsammo said: I'm guessing one for him and one for non hit takers on the other team... Here you go pal, it seems you've lost yours - use mine! 52,000 rounds ?????? holy buckets of BB's batman!! I realise that's potentially only 1000 per week..... but wowsers, it seems a lot all together! Where did you get 'em from? I'm guessing you must have got a discount for bulk? Picked a nice new sight up. The glass is nice and clear - not too sure on the brightness of the dot yet though. Can't decide which to put it on. Probably stay on the Vector. . . . . . And finally.... a lovely little pistol case. Should do the job nicely... it was a bulk order for me and my team. I get 5% discount from longbow as I am an affiliate. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now