mightyjebus Posted June 2, 2022 Share Posted June 2, 2022 I wanted a white front grip for the AK Storm so a quick trip to thingiverse and a bit of white esun PLA+ and I now have one. Floperator, Druid799 and Hellfish 1 2 Link to comment Share on other sites More sharing options...
SSPKali Posted June 4, 2022 Share Posted June 4, 2022 (edited) I made an elastic loop to go around my rail at the receiver end to stop the sling hardware trashing it and clanking like a bag of spanners as I move around 😂 50mm elastic and 2mins with a sewing machine 👍 Edited June 4, 2022 by SSPKali Added picture Druid799, Rogerborg, CoCost and 1 other 4 Link to comment Share on other sites More sharing options...
Davegolf Posted June 22, 2022 Share Posted June 22, 2022 Found a couple offcuts of 0.9mm Ti sheet and bolted my face mesh to my Bolle X800’s 😁 Give it a test this weekend and if all good I’ll swap the lower bolts for rivets Druid799 and Floperator 2 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted June 22, 2022 Supporters Share Posted June 22, 2022 Puts my zip-ties to shame. Druid799 1 Link to comment Share on other sites More sharing options...
Davegolf Posted June 22, 2022 Share Posted June 22, 2022 Haha thats what i did with my old Smith goggles, worked very well, but not so easy on the X800s Link to comment Share on other sites More sharing options...
Supporters Rogerborg Posted June 22, 2022 Supporters Share Posted June 22, 2022 8 hours ago, Davegolf said: Found a couple offcuts of 0.9mm Ti sheet and bolted my face mesh to my Bolle X800’s 😁 Nice, what's the hole size on that mesh? Link to comment Share on other sites More sharing options...
Davegolf Posted June 22, 2022 Share Posted June 22, 2022 The goggs or the mask? Link to comment Share on other sites More sharing options...
Davegolf Posted June 22, 2022 Share Posted June 22, 2022 The Goggs are mesh supplied by @heroshark, his super fandango hexagonal stuff. Did some drill today with the mask, tweaked it about - all good. Rivetted the lower and painted it up Definitely the best setup I’ve ever had, with prescription inserts in the X800s Floperator, TheFull9 and Druid799 1 1 1 Link to comment Share on other sites More sharing options...
Dan Robinson Posted June 22, 2022 Share Posted June 22, 2022 (edited) Why sir, you appear to be pointing at the ground. Edited June 23, 2022 by Dan Robinson Typo Rogerborg and Davegolf 2 Link to comment Share on other sites More sharing options...
Supporters Rogerborg Posted June 23, 2022 Supporters Share Posted June 23, 2022 13 hours ago, Davegolf said: The Goggs are mesh supplied by @heroshark, his super fandango hexagonal stuff. Ah, right, you have chosen wisely. I've gone mesh outdoors now, it's so liberating not to have the worry about fogging. Lozart 1 Link to comment Share on other sites More sharing options...
Davegolf Posted June 23, 2022 Share Posted June 23, 2022 Aye fog is the biggest bitch of airsoft, especially if your eyes need correction. Floperator 1 Link to comment Share on other sites More sharing options...
Popular Post Stratton Oakmont Posted June 23, 2022 Popular Post Share Posted June 23, 2022 I am a child Druid799, Floperator, Dan Robinson and 6 others 3 6 Link to comment Share on other sites More sharing options...
Popular Post PureSilver Posted June 23, 2022 Popular Post Share Posted June 23, 2022 Inspired by the Springfield V12s, I present the Detonics... V6? This is eventually going to be mocked up (with further inspiration from Marui’s Vorpal Bunny) with smoothed grips, a front rail, and a battleship grey paintjob. It is an ARMY R45 with an ACM Shield RMS, a Nova trigger, and Shooters Design 150% recoil springs. Not pictured yet are the Army extended magazine release and modified grips, which have been filled with putty in readiness for relief cuts and sanded smooth. Milling the slide and the adaptor plate allowed me to sink the optic 3.5mm into the slide. This actually lower-third-cowitnesses with the factory sights, somehow. Custom milled and drilled slide and barrel ports. The ARMY’s outer barrel is stainless steel and broke one of my milling bits. Lesson learned about using them to drill holes... Total cost so far: ~£120 Rogerborg, Jacob Wright, Tackle and 4 others 3 4 Link to comment Share on other sites More sharing options...
Stratton Oakmont Posted June 23, 2022 Share Posted June 23, 2022 43 minutes ago, PureSilver said: Inspired by the Springfield V12s, I present the Detonics... V6? This is eventually going to be mocked up (with further inspiration from Marui’s Vorpal Bunny) with smoothed grips, a front rail, and a battleship grey paintjob. It is an ARMY R45 with an ACM Shield RMS, a Nova trigger, and Shooters Design 150% recoil springs. Not pictured yet are the Army extended magazine release and modified grips, which have been filled with putty in readiness for relief cuts and sanded smooth. Milling the slide and the adaptor plate allowed me to sink the optic 3.5mm into the slide. This actually lower-third-cowitnesses with the factory sights, somehow. Custom milled and drilled slide and barrel ports. The ARMY’s outer barrel is stainless steel and broke one of my milling bits. Lesson learned about using them to drill holes... Total cost so far: ~£120 Is that honestly a genuine shield??? Link to comment Share on other sites More sharing options...
Supporters Lozart Posted June 23, 2022 Supporters Share Posted June 23, 2022 1 hour ago, PureSilver said: with an ACM Shield RMS 26 minutes ago, Stratton Oakmont said: Is that honestly a genuine shield??? Genuine Chinese copy! PureSilver, Rogerborg and Druid799 1 2 Link to comment Share on other sites More sharing options...
PureSilver Posted June 23, 2022 Share Posted June 23, 2022 2 hours ago, Stratton Oakmont said: Is that honestly a genuine shield??? Fake as fake can be! Link to comment Share on other sites More sharing options...
Stratton Oakmont Posted June 23, 2022 Share Posted June 23, 2022 Is it any good? Rogerborg 1 Link to comment Share on other sites More sharing options...
PureSilver Posted June 23, 2022 Share Posted June 23, 2022 (edited) 9 hours ago, Stratton Oakmont said: Is it any good? I don’t have many rounds through it; it’s solely for this pistol, and the pistol isn’t finished. From what limited handling it’s had it seems perfectly OK; for what I paid that’s excellent. Edited June 23, 2022 by PureSilver Link to comment Share on other sites More sharing options...
Supporters Druid799 Posted June 24, 2022 Supporters Share Posted June 24, 2022 On 23/06/2022 at 10:39, Stratton Oakmont said: I am a child AND ???? The problem is what ? 🤔 🤣🤣🤣🤣👍 Link to comment Share on other sites More sharing options...
Popular Post Floperator Posted July 18, 2022 Popular Post Share Posted July 18, 2022 Too hot for client work, not too hot to dick about with my own little projects. Today I made a packing piece out of brass plate for my FNX, to go around those awkward exposed tabs: Speedbird_666, timski, Tackle and 7 others 7 3 Link to comment Share on other sites More sharing options...
SBoardley Posted July 22, 2022 Share Posted July 22, 2022 Rs magpul Emags for my TM ngrs. PopRocket123 and Enid_Puceflange 1 1 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted July 23, 2022 Supporters Share Posted July 23, 2022 You do the mods or pay someone? I bought some EMAGs yeeeears ago to do the exact same, have lots of TM standard 82/30 USGI mags sitting around, but never managed to combine the two. Link to comment Share on other sites More sharing options...
SBoardley Posted July 23, 2022 Share Posted July 23, 2022 7 minutes ago, TheFull9 said: You do the mods or pay someone? I bought some EMAGs yeeeears ago to do the exact same, have lots of TM standard 82/30 USGI mags sitting around, but never managed to combine the two. Yeah I’ve just done 4 for tm. Tbh bud, the best doner mags are epm. I can show you how to do them in like 10 minutes. The old stanags have a lot of tedious work. You can do the epm mod with a file , a sliding square and hack saw. No power file needed. Jacob Wright, johnnyj, Floperator and 1 other 4 Link to comment Share on other sites More sharing options...
SBoardley Posted July 25, 2022 Share Posted July 25, 2022 On 23/07/2022 at 22:53, TheFull9 said: You do the mods or pay someone? I bought some EMAGs yeeeears ago to do the exact same, have lots of TM standard 82/30 USGI mags sitting around, but never managed to combine the two. I’ll try put how to footage up this weekend; I’ve got one more epm mag so I can do it completely from scratch. Druid799 and TheFull9 1 1 Link to comment Share on other sites More sharing options...
RostokMcSpoons Posted July 31, 2022 Share Posted July 31, 2022 Rattle can 'MTP' on my olive green mag pouches... it's such an easy thing to do, but very satisfying for the 20 minutes it took Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now