hitmanNo2 Posted September 10, 2019 Share Posted September 10, 2019 22 minutes ago, clumpyedge said: Not when you know a fabricator but if I wanted it in steel then I would do so, the question was about the hardest material available via 3d printing 😉 You can 3D print steel 😉 Link to comment Share on other sites More sharing options...
clumpyedge Posted September 10, 2019 Share Posted September 10, 2019 Just now, hitmanNo2 said: You can 3D print steel 😉 Well fuck me sideways, you learn something new every day! I thought the newest thing was resin! Link to comment Share on other sites More sharing options...
hitmanNo2 Posted September 10, 2019 Share Posted September 10, 2019 4 minutes ago, clumpyedge said: Well fuck me sideways, you learn something new every day! I thought the newest thing was resin! Yeah. Pretty crazy. You can do titanium too. Link to comment Share on other sites More sharing options...
clumpyedge Posted September 10, 2019 Share Posted September 10, 2019 12 minutes ago, hitmanNo2 said: Yeah. Pretty crazy. You can do titanium too. While I'm happy to pay for decent work I assume the steel and Titanium would cost an absolute bomb for something so simple! Think if I don't go down the route of the FMA clone of the kagworks one or the juggernaught I'll just go with normal 3d printed materials Link to comment Share on other sites More sharing options...
hitmanNo2 Posted September 10, 2019 Share Posted September 10, 2019 Indeed. I only mentioned it to be pedantic heh. I'm actually in a similar position to you though. Looking for that type of MOLLE mounted case for a Samsung. I was thinking about going for one of newer ones for iPhone 8+ (as they seem better quality) and then gluing a silicone case inside it for retaining but I haven't checked measurements yet. Maybe put a thin metal plate on the exterior as I'm not sure how well they'll hold up to BBs. Link to comment Share on other sites More sharing options...
PopRocket123 Posted September 10, 2019 Share Posted September 10, 2019 1 hour ago, clumpyedge said: Well fuck me sideways, you learn something new every day! I thought the newest thing was resin! It's crazy what 3D printers can do these days. Check this video out by gun Jesus. The first prototypes of the Hudson HI were actually 3D printed and machine finished clumpyedge 1 Link to comment Share on other sites More sharing options...
Guest PT247 Posted September 10, 2019 Share Posted September 10, 2019 Why does anyone want their phone on an airsoft field? Link to comment Share on other sites More sharing options...
Moderators Tackle Posted September 10, 2019 Moderators Share Posted September 10, 2019 I'm guessing they want record as they run around, mounting it on the chest is prob more low profile than a cam on top of your head etc ? Link to comment Share on other sites More sharing options...
Popular Post clumpyedge Posted September 11, 2019 Popular Post Share Posted September 11, 2019 4 hours ago, Tackle said: I'm guessing they want record as they run around, mounting it on the chest is prob more low profile than a cam on top of your head etc ? Not for me, maps, taskings, important area photos etc if you had a chest mounted camera surly all you'd see if arms meeting in the middle holding a gun? 5 hours ago, PT247 said: Why does anyone want their phone on an airsoft field? For the above reasons and also personally there are times when I HAVE to have Comms on the field with me be it marshalling or playing. Don't need to defend the reasons but if I have to have it why not have it in a decent protected area and in such a way it's always accessible Druid799, Enid_Puceflange, Panama and 7 others 9 1 Link to comment Share on other sites More sharing options...
iozjik Posted September 11, 2019 Share Posted September 11, 2019 12 minutes ago, clumpyedge said: For the above reasons and also personally there are times when I HAVE to have Comms on the field with me be it marshalling or playing. Don't need to defend the reasons but if I have to have it why not have it in a decent protected area and in such a way it's always accessible Seems like you a bit overestimate chest-mounted position for your phone. I've tried to design and print this type of phone holder. It takes a lot of place on your platecarrier, non-waterproof (so you have to put phone away during rain), camera may be damaged by BB. You also may damage phone by your gun while falling or going prone. And screen is poorly readable on sunny days, so you have to turn away from sun (and sometimes, enemy). So I recommend thinking twice about ordering this thingie. It may be a nice toy if you have 3D-printer (then you'll print it for 3$), but it will be much more disappointing to pay 50$ for it. 🤑 Link to comment Share on other sites More sharing options...
clumpyedge Posted September 11, 2019 Share Posted September 11, 2019 3 minutes ago, iozjik said: Seems like you a bit overestimate chest-mounted position for your phone. I've tried to design and print this type of phone holder. It takes a lot of place on your platecarrier, non-waterproof (so you have to put phone away during rain), camera may be damaged by BB. You also may damage phone by your gun while falling or going prone. And screen is poorly readable on sunny days, so you have to turn away from sun (and sometimes, enemy). So I recommend thinking twice about ordering this thingie. It may be a nice toy if you have 3D-printer (then you'll print it for 3$), but it will be much more disappointing to pay 50$ for it. 🤑 Actually I've done a lot of looking into reviews and reading up on the juggernaugt system and the kagworks mount just don't want to pay for something and pay a huge import charge for what I could have 3d printed. The camera can be covered by a plate of pecan (not that I'd be using the camera function), not sure what phone you use these days but all smart phones are adjustable to be able to be read with sun beaming down on them. The case I'd mount to it is 100% waterproof so it's not the case that would come with the mount or be printed. The phone I'm doing this for is an old phone as I started before do couldn't care less if it's damaged and I have a few others spare of the same make and model (I had a thing for that phone for a while) which also won't take up much real estate on the PC. Not sure how this has turned into such a hot topic. Druid799 1 Link to comment Share on other sites More sharing options...
Supporters Druid799 Posted September 11, 2019 Supporters Share Posted September 11, 2019 3 hours ago, clumpyedge said: Not sure how this has turned into such a hot topic. Didn’t realise you were new to Airsoft forums ? 🤣🤣🤣🤣🤣🤣 clumpyedge and Tommikka 2 Link to comment Share on other sites More sharing options...
Supporters Samurai Posted September 11, 2019 Supporters Share Posted September 11, 2019 16 hours ago, Prisce said: I’d imagine your looking about £50-60 tops(hopefully less). The more you make, the cheaper they get, but some of that looks intrinsic= time=expensive. That was either a very good guess or you also clicked "order it printed". That came up with $65.52 which is £53. 😮 Link to comment Share on other sites More sharing options...
clumpyedge Posted September 11, 2019 Share Posted September 11, 2019 33 minutes ago, Samurai said: That was either a very good guess or you also clicked "order it printed". That came up with $65.52 which is £53. 😮 I've just asked a mate to give me a price so doubt he'll be charging me anywhere near that, only mentioned it in passing and said he had a printer so jobs a goodun BibbsOnTour 1 Link to comment Share on other sites More sharing options...
Supporters Prisce Posted September 11, 2019 Supporters Share Posted September 11, 2019 8 hours ago, Samurai said: That was either a very good guess or you also clicked "order it printed". That came up with $65.52 which is £53. 😮 Honestly, educated guess. Link to comment Share on other sites More sharing options...
Supporters Samurai Posted October 8, 2019 Supporters Share Posted October 8, 2019 New toy printed my Striker trigger. Link to comment Share on other sites More sharing options...
PopRocket123 Posted October 20, 2019 Share Posted October 20, 2019 The first test print of the rail system for my SCAR H. I've been working on it on and off for months so it's pretty exciting. It needs bulking up it's a little flimsy but a solid start. GeorgePlaysAirsoft 1 Link to comment Share on other sites More sharing options...
PopRocket123 Posted July 31, 2020 Share Posted July 31, 2020 The final version has been printed! It's been through a couple of redesigns, the bottom rail has been lowered to make room inside, the walls have been thickened, some unnecessary screws have been removed and the m Lok is now to spec. Just waiting for the fittings to arrive and for it to be dropped round and I can finally get it fitted. Then on to the M4 stock adapter... GothicGhost and Caj109 2 Link to comment Share on other sites More sharing options...
PopRocket123 Posted August 15, 2020 Share Posted August 15, 2020 A few more bits finished printing last night. The replacement gas plug, selector blank, spring stop and buffer tube adapter are all for the SCAR H DMR and the last part is a buffer spacer to work with the M4 folding stock adapter Link to comment Share on other sites More sharing options...
Supporters SeniorSpaz87 Posted August 18, 2020 Supporters Share Posted August 18, 2020 Working on the DP-28 mag adapter. Its not quite there but all my CADing has been accurate - hoping to have it done for this weekend... Now who wants a pan mag on an AR57 Brophy 1 Link to comment Share on other sites More sharing options...
Supporters Lozart Posted August 19, 2020 Supporters Share Posted August 19, 2020 Not me specifically (my brother in law printed it for me), Cyma SOCOM muzzle adaptor to fit suppressors! Threads needed a good cleanup and the design needs a bit of a tweak as it's a bit wobbly in use but it works! Brophy 1 Link to comment Share on other sites More sharing options...
Brophy Posted August 19, 2020 Share Posted August 19, 2020 Nice to see a fellow SolidWorks user @SeniorSpaz87 😀 SeniorSpaz87 1 Link to comment Share on other sites More sharing options...
mightyjebus Posted September 7, 2020 Share Posted September 7, 2020 Picked up a AA12 but quickly got sad when I couldn't find any decent (or decently priced) accessories for the AA12. Since it will be used in CQB then a torch is a must so I knocked up a mount in Sketchup and printed on my Anycubic Photon. PopRocket123, GeorgePlaysAirsoft and Enid_Puceflange 3 Link to comment Share on other sites More sharing options...
mightyjebus Posted September 24, 2020 Share Posted September 24, 2020 Designed and Printed a EMAG for TM NGRS rifles. SgtTalbert, PopRocket123 and Samurai 1 2 Link to comment Share on other sites More sharing options...
hitmanNo2 Posted September 24, 2020 Share Posted September 24, 2020 Very cool. Is that off a resin printer? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now