Leaderboard

Plus, “you’ll make a friend” If you remember that one from a while ago 😂

Is the WE PDW still available? Will you take £100? It’s for my sons birthday I told him he can have it and he’s really excited but I’m a college student so I only have £100 🥺

How it started: How it's going: Final form (for now): (added the Ergo grip, suppressor and bipod)

https://www.usedairsoft.co.uk/rif-s/gas-powered_1/golden-eagle-m4a1-gbbr-extras_i60692 Step right up, time for the Second Golden eagle m4 trying to be sold off for way more than its worth this past week. This time its £450 for the gun, some odd attachments and 3 Barely Functional magazines!!!! What a steal! And I'm not even going to get into the fact this poor gun was seemingly being run on black gas the whole time, so the internals that aren't already broken are probably screaming for the Emperor's Mercy.

Love the fact he says he needs to get rid of his as "it takes up much needed space"...........but you want to swap it for something else that will also fill your "much needed space" Is it half term again already ffs🤪

Sounds a bit of a Mong to be honest Hence my post yesterday

2 UGL's courtesy of JinxDuh very happy with my new toys & the best bit is... I need to get another L85A2 & a G36K to do them justice. A fake PEQ2 arrived for my Mk18 Mod0 too, just waiting on the RDS now.

Lambda Defence with SD kit, Marayama and Archwick GBB's. On Vorsk 6 gas and using .2g BB's we get 340 FPS on the Lambda, 320 on the Archwick and 315 on the Marayama. The Lambda is the softest shooting and could do with some beefier bolt return springs and it's a bit underwhelming to fire. If you are after quality and performance then get the Archwick as it's outstanding. I tried it with 0.3g's and it had no issues lifting them and the hop still had more life in it and I think it probably could do 0.36g BB's out the box. If the straight mag version is what you want, but on a budget, them Marayama are (or already have) releasing a straight mag version with the spare mags around £25 overseas which is about 1/2 the price of the Archwick mags but sadly I doubt they will be compatible between GBB's. Oh and the Lambda magwell is annoying as VFC and Raven mags can move forwards and backwards, sometimes releasing a little gas, which is a bit annoying. Some sticky backed foam inside the magwell will sort it.

A bit of thread lock holds it👍 I have lost one before because they can sometimes unscrew with vibrations.

Got an extension ordered, my only concern is the lack of bayonet catch but won't loose any sleep over it.

Come join us 😛 https://discord.gg/VVy3wB2w

The JG K length is literally a C with a barrel extension 😂 In fact, the majority of them seem to follow in the same pattern. Initially the UGL came with my "Full" length S&T which I've built to be an MG36!

Then you might like my G&G SR15

I've got a couple of G36C's & swopped the handguards around recently, one took a litte fettling to get the pin through one but very little. I've had this UGL on a G36C & a MG36(K) with no issues and it felt solid on both(but heavy). It'll never be used in game because it's a wallhanger but I know the weight would piss me off before I'd even left the safe zone. But... On a possitive note, swopping handguards about for these pics made me realise I only needed a barrel extension (fnar) to turn one of my G36C's into a K(ish).

Feels solid, only on a G36C at the moment. They have a bit of heft to them,feels much heavier than the 320 I have for my L85A3 but it's a more modern design, more to do with the attached handguards probably. I have a G36K set up as an MG36 with a bipod, I'll pop the ugl on it to see how it looks but prefer it as an MG36.

Oooo she purty!!! I’m going down the KS-1 rabbit hole personally 🤣

My G26

custom gbb workshop TAIWAN military T65K2 rifle LY aeg deep marking cerakote detail fix

Plan was to do a modernised AK build. so got an Arron Smith 2.1 rail but something went wrong along the way…

I wonder how many people bought the golden eagle gbbr's thinking that they are the same as the double eagle

4uad airsofts channel, who appear to be in the pockets of GHK , teased us with it in their most recent video RPReplay_Final1715075642.mov

When I say "I fuck with everything", on the SR25 I changed; stock grip spring hop rubber & nub Outer barrel gas block and gas tube flash hider upgraded the MOSFET (the remote part in the stock tube) to the Perun ETU++ added a suppressor The gearbox internals, the stock tube and the receiver are still as they came...

Great, now I’m even more excited to get the SR15 🙄😂

I fuck with everything. But my G&G SR25 gearbox is bog standard, unopened.

@hunter511 I am also curious as to what you mean. What I've seen here has always been adherence to rule#1 (baring a few notable exceptions) and mocking load outs is not really the done thing given everyone is able to wear what they want. If you are talking about the many posts on faceache with them shooting out windows ....many of us purposely don't interact with content like that...

Would it be possible to have a clearer message on a listing for when an item is sold? Something like a “SOLD” stamp mark appear over the listings pics or similar?

After its first iteration I finally built it as it was meant, pretty satisfied on the looks of it 😍

All of the foams do the same basic job of providing padding. Simple basic foam, uncut will happily compress to hold and protect your equipment. You can put pretty much anything in the case, in any position and unless it’s too thick preventing you from forcing shut and as long as you don’t put in too much equipment in too close then it will hold and protect. The items may slip around a bit bumping into each other depending on how close and how tight the fit is vs how hefty the items are. You can cut in to standard foam to make pockets to avoid your equipment sliding and to make shutting easier Standard foam can be cut with a knife with good or bad looking results being dependant on how carefully you cut - or use a laser cut A single piece/layer of foam can be more difficult to cut neatly into the right depths for various different items Pick and pluck is typically used in two pieces/layers - one layer as standard foam, and the other piece/layer as a precut grid with small points uncut. You plan your layout then ‘pick and pluck’ ripping out the squares that you want to place your equipment in. This results in a pixelated style, or you can cut some of the grid with a knife (or laser cut - but if you’re laser cutting then you’ve defeated the object of using pick & pluck) Shadow foam is a brand, which comes in multiple colours, eg standard grey on the top layer and a bright colour in the lower layer(s)*. Therefore when cut to fit your equipment an empty slot is obvious as you can see a coloured ‘shadow’ Shadow foam is inspired by the wall mounted shadow boards traditionally used in workshops, schools and prisons to make it obvious when a tool is missing * Note that I have referred to ‘pieces’ and ‘layers’. These are not technical terms, but just me referring to how many blocks of foam you put into the case. Normally you could think of it as a top and bottom for the lid and base. But the bottom / base could be two pieces of foam such as with pick & pluck - one whole block approx half the depth of the base of your case and a second on top that you cut/pluck apart to form the gaps that you insert your equipment in A single piece of ShadowFoam is made of a number of layers. When you cut the shape you then peel out a layer of foam. A thin piece of equipment can be accommodated with one layer peeled out a thicker piece of equipment needs more than one layer peeled out to give greater depth. Pick & pluck: https://youtu.be/dSC2vEVfSIQ?si=rHpqQ2eESKVJ0JE1 Shadow foam: https://youtu.be/GMBziTVpoWE?si=aIH3vxWDz8aV-A2a

Maybe 'COMPLETED' confuses some people 🤷‍♀️

By full size, I meant the full stock, longer barreled version

My mate fell off a walkway at the factory he works at, into a vat of strawberries, sugar and pectin. Amazingly he was unhurt. He is so jammy!

The eBay gods smiled upon me , £22 delivered

I've had one of these for years. Slept on all sorts of ground and used it as a range mat for HFT. ALWAYS kept in the van in case of late night breakdown. Not especially wide. The lad once forgot his kipmat, and we had to share this one. It was a bit cosy tbh. I've had plenty of nights on a half inch inflating mat too, can't remember the brand, but it was bought for daughter's D of E many moons ago. About £15 on Evil Bay. Gave up on roll mats a long time ago, too bulky and they get in one's way.

"Raven", the shit version of Nuprol.

Bought off here, arrived today, modelled by me to show @sofieb 😁 Oh, it's a Warrior Elite 901.

Surely they should be "industrial", "medieval", "furure" and "aztec"? Especially if the head marshal is a bald thespian with eccentric taste in clothing

I'm sure TM have been intently reading this thread and as such will be announcing a GBB Hi Power at next week's Shizuoka Hobby Show. It's on my vision board ha.

One of us is a mind reader!

... cut to view outside Lozart's home ...

I'm sure I'll be branded a heretic but I've never really seen the appeal of the Browning HP. Of course, that said I don't like Glocks either so what do I know?

Hi all! Got a dead warhead motor, tried contacting Warhead fia FB, they only apparently deal via email now, so emailed multiple times ([email protected]) no response. Is there some big holiday / other contact / no support anymore? Cheers