Gun picture thread

[Tackle]

On 19/06/2022 at 11:22, Enid_Puceflange said:

Fitted an M203 to my GHK cos it wasn’t heavy enough already 🤦🏻‍♂️
 

Nah that's not heavy, try using a real steel mg42 like a sniper, I think I had to have a nap afterwards 😴

[cropzy]

Finally part of the gbbr gang


Torch is mounted like that as it wont fit on any of the side rails due to the front end being chonky.

[JimFromHorsham]

 

bit of a clone mash up of eras but I like it

[johnnyj]

Seen this super cheap and could not pass it up 😃

[JimFromHorsham]

Back when Smith&Wesson made Glocks until Glock said you can’t do that anymore 

 

[Davegolf]

Took the freshly pimped TM G19 Gen 4 out today, some indoor action at Invicta Black Site.

Absolutely love how snappy the Gen 4 is even on lowest power gas, 45M flat trajectory on 0.25s, couldn’t ask for more from such a little gun!

 

 

[JimFromHorsham]

10 minutes ago, Davegolf said:

Took the freshly pimped TM G19 Gen 4 out today, some indoor action at Invicta Black Site.

Absolutely love how snappy the Gen 4 is even on lowest power gas, 45M flat trajectory on 0.25s, couldn’t ask for more from such a little gun!

 

 

great job on that  , very nice build

[Sneaky]

I have put serious amount of work into my small, but perfectly formed collection. Love them!

[Guest]

KWA KRISS Vector modified as follows:

 

Krytac Gen2(2017) upper and lower
(Extensively modified internals to fit)
RS KRISS stock
RS KRISS angled front grip
RS KRISS hand stop
Clone Magpul MBUS Pro BUIS
Angry Gun barrel shroud with tracer 
Ace1Arms rhs mag release
RA-Tech CNC steel buffer
RA-Tech inner barrel & hop unit
Rhesus CNC gen2 trigger
Rhesus CNC Safety & Fire selectors

Four colour camo Cerakote by Supreme Coatings

[emilianoksa]

On 25/06/2022 at 14:17, JimFromHorsham said:

Back when Smith&Wesson made Glocks until Glock said you can’t do that anymore 

 

Are those the KWC versions of old, or does somebody else make them?

Just my opinion, but they are a better looking pistol than the M&P 9.

16 hours ago, Davegolf said:

Took the freshly pimped TM G19 Gen 4 out today, some indoor action at Invicta Black Site.

Absolutely love how snappy the Gen 4 is even on lowest power gas, 45M flat trajectory on 0.25s, couldn’t ask for more from such a little gun!

 

 

What brand are the slide and frame?

 

Very nice work, by the way.

[JimFromHorsham]

@emilianoksathey are both made by Western Arms , the two tone version has a metal slide & barrel upgrade fitted (shooters design if I recall )   

[Davegolf]

@emilianoksa All stock TM

I sanded the finger grooves off the lower as they were just annoying and then stippled and painted it.

The slide is stock just Cerakoted in patriot brown, Tritium front sight, cowcow rear.

[emilianoksa]

38 minutes ago, JimFromHorsham said:

@emilianoksathey are both made by Western Arms , the two tone version has a metal slide & barrel upgrade fitted (shooters design if I recall )   

Thanks.

 

Pity they are no longer available.

38 minutes ago, Davegolf said:

@emilianoksa All stock TM

I sanded the finger grooves off the lower as they were just annoying and then stippled and painted it.

The slide is stock just Cerakoted in patriot brown, Tritium front sight, cowcow rear.

Excellent work.

 

Considering it is all stock, that is very impressive.

 

Does the cerakote on the slide really reduce the risk of the plastic scratching?

[Davegolf]

Cerakote is tougher than the plastic yes, but obv if you grind it up brickwork it wont last, but neither would any coating/anodising etc

[emilianoksa]

Thanks again.

[Ebeneezer Goode]

A couple of shots of the USP 9 that I got recently and one with the UAR in tow - think they complement each other well aesthetically, nice sci fi ish vibe and something a bit different. Rather enjoying this pistol shooting it in the garden and skirmishing it this Sunday.

 

Will probably paint the slide in Halfords OD like all my others...

 

Edited June 27, 2022 by Ebeneezer Goode

[Cain-c-123]

The finished mtw build is actually finished now 😂🤘🏻

[Alimcd]

AAP build starting to take shape, waiting for a pair of custom grip scales with Ruger medallions inset, low profile mount for the Viper and a freshly cerakoted metal upper receiver to come back from Jack at Airsoft Engraver with Ruger MK4 Competition trades 

[Alimcd]

For every realistic pew I do, one of these happens 

[alxndrhll]

6 minutes ago, Alimcd said:

For every realistic pew I do, one of these happens 

 

Doesn't hold a candle to the chrome and carbon fibre Thompson 😂

[Davegolf]

AK105-VSU (11.5” barrel)

 

I really enjoy making paint and environments work, spent a lot of time and collected a lot of Cerakote swatches and loads of aerosol tests.

 

 

Some colours are very ‘reactive’ and play to the human eye changing quite dramatically in different light and backdrops.

[SerialNoodle]

Lovely 😍

On 22/06/2022 at 20:31, Davegolf said:

@SerialNoodle what is that rifle? Looks epic! Isn’t it already 9mm?

'Tis actually a TM Type 89 GBBR. It runs on a 5.56 magazine though I'm getting a fancy 9mm HPA conversion made for it.

[frontsight]

Now I just need a black leather holster and only speak in eccentric catchphrases

 

 

 

 

 

[Wavey_Gravey]

“You do not get to watch my fucking television”

[Tackle]

On 01/07/2022 at 18:32, Davegolf said:

AK105-VSU (11.5” barrel)

 

I really enjoy making paint and environments work, spent a lot of time and collected a lot of Cerakote swatches and loads of aerosol tests.

 

 

Some colours are very ‘reactive’ and play to the human eye changing quite dramatically in different light and backdrops.

Dave, that can is just sexy as f#ck 😍