Popular Post JimFromHorsham Posted April 22, 2022 Popular Post Share Posted April 22, 2022 I’m back … luck was on my side for a set of genuine Ruger ring mounts for an obscenely cheap price from eBay , so I’m playing with my 9.5incher again Bushmaster 2.5x32 long eye relief scope can now be fitted the only question is , do I get a holster for it 🤷🏼♂️ Enid_Puceflange, BigStew, frontsight and 6 others 4 5 Link to comment Share on other sites More sharing options...
paradoxum Posted April 22, 2022 Share Posted April 22, 2022 (edited) On 21/04/2022 at 16:19, lucaslu1709 said: sexy af mate I'd personally remove the grip tape from the wml and respray the tracer unit, then it'd be perfect at a glance imo. If we were being really picky maybe redo the grip tape cut outs on the stock, the one on the bottom looks a teeny bit wonky but that's coming from someone who spends 5 minutes putting the stickers on my legos 😛 thanks:D I'm codenaming it the 'Falken'. grip tape on the wml? if you mean the torch, it's on there because the rubber pad covering the button worn away and I needed some way to cover it. I might move it to the top rail though it'll look better. I just traced the lines from everywhere I put grip tap with paper, scanned it, then edited the file in mspaint to make it perfect, gonna print that out, tape it on top of my grip tape sheet, and cut them out nice and clean and redo it all - it's gonna look swag. Edited April 22, 2022 by paradoxum Link to comment Share on other sites More sharing options...
Guest Posted April 23, 2022 Share Posted April 23, 2022 Cerakote. Show me a better firearms finish 😎 Link to comment Share on other sites More sharing options...
Davegolf Posted April 23, 2022 Share Posted April 23, 2022 That’s not a Vector! 😆 Cerakote properly done is very satisfying! Link to comment Share on other sites More sharing options...
Guest Posted April 23, 2022 Share Posted April 23, 2022 8 minutes ago, Davegolf said: That’s not a Vector! 😆 Cerakote properly done is very satisfying! I don’t often have anything to do with AR’s, but when I do, it’s done properly 😎 Link to comment Share on other sites More sharing options...
Cannonfodder Posted April 23, 2022 Share Posted April 23, 2022 14 hours ago, JimFromHorsham said: the only question is , do I get a holster for it 🤷🏼♂️ Yes. The pistol is a thing of beauty and a leather holster would go with it nicely Enid_Puceflange and JimFromHorsham 2 Link to comment Share on other sites More sharing options...
Skullchewer Posted April 23, 2022 Share Posted April 23, 2022 Two very different beasties. LCT LTS 13.5, Minidiva 551 holographic and eotech clone magnifier. G&G SMC-9, RDS (forget which, basically a clone), B&T tracer unit, G&G ballsack (I mean drum mag, sorry). frontsight 1 Link to comment Share on other sites More sharing options...
Nick G Posted April 23, 2022 Share Posted April 23, 2022 On 17/04/2022 at 20:20, Druid799 said: I don’t care ! The heresy it burns my eyes ! 😫 Here you go, stop yer whinging 🤣 😁 Druid799 and Skullchewer 2 Link to comment Share on other sites More sharing options...
Popular Post MAX DICKER Posted April 23, 2022 Popular Post Share Posted April 23, 2022 TM RMR plates "not for G18's" Challenge accepted. Nick G, JimFromHorsham, frontsight and 3 others 5 1 Link to comment Share on other sites More sharing options...
Supporters Druid799 Posted April 23, 2022 Supporters Share Posted April 23, 2022 28 minutes ago, Nick G said: Here you go, stop yer whinging 🤣 Nope , never ! 😈😈 suppose it’ll do ! 😉 Nick G 1 Link to comment Share on other sites More sharing options...
frontsight Posted April 23, 2022 Share Posted April 23, 2022 Could you let me know which brand's x300 that is? 22 minutes ago, MAX DICKER said: Link to comment Share on other sites More sharing options...
Popular Post MAX DICKER Posted April 23, 2022 Popular Post Share Posted April 23, 2022 21 minutes ago, frontsight said: Could you let me know which brand's x300 that is? It's the real deal bud. Yeah, I hate money and find any excuse to get rid of it. Druid799, Talltom, Jacob Wright and 3 others 2 3 1 Link to comment Share on other sites More sharing options...
frontsight Posted April 23, 2022 Share Posted April 23, 2022 11 minutes ago, MAX DICKER said: It's the real deal bud. No wonder it looked so good... I can't afford to spend £300+ on a light........ Link to comment Share on other sites More sharing options...
MAX DICKER Posted April 23, 2022 Share Posted April 23, 2022 (edited) 2 minutes ago, frontsight said: No wonder it looked so good... I can't afford to spend £300+ on a light........ It's always £20 off a mate if the missus asks Edited April 23, 2022 by MAX DICKER Floperator, Druid799, Nick G and 1 other 1 3 Link to comment Share on other sites More sharing options...
Popular Post Hellfish Posted April 24, 2022 Popular Post Share Posted April 24, 2022 (edited) Just Another Black n Tan AR ....... but this one is mine and therefore my favourite (even despite the terrible photos). Needs a service as it's been rattling around in storage for 2 years, and I also need to have the polymer receiver changed for the metal one I have. Edited April 24, 2022 by Hellfish JimFromHorsham, Nick G, The Waco Kid and 3 others 4 2 Link to comment Share on other sites More sharing options...
Davegolf Posted April 24, 2022 Share Posted April 24, 2022 Less is more n all that, I’m a sucker for contrast, I love those black n RAL8000 HKs Link to comment Share on other sites More sharing options...
Hellfish Posted April 24, 2022 Share Posted April 24, 2022 9 minutes ago, Davegolf said: Less is more n all that, I’m a sucker for contrast, I love those black n RAL8000 HKs Got everything it needs to be functional and look good IMHO. Pretty much sums me up too TBH 😁 Link to comment Share on other sites More sharing options...
Popular Post JimFromHorsham Posted April 24, 2022 Popular Post Share Posted April 24, 2022 Another WE GBBR build , Mk12 MOD1 inspired . Hellfish, MAX DICKER, Bert918 and 7 others 5 5 Link to comment Share on other sites More sharing options...
The Waco Kid Posted April 24, 2022 Share Posted April 24, 2022 “Now what you should do is covert it to an SBR…” doh🤦♂️ JimFromHorsham 1 Link to comment Share on other sites More sharing options...
PopRocket123 Posted April 24, 2022 Share Posted April 24, 2022 I got a good picture of the bullpup AK today JimFromHorsham and Druid799 1 1 Link to comment Share on other sites More sharing options...
Cannonfodder Posted April 25, 2022 Share Posted April 25, 2022 Finally finished tarting up the kurtz JimFromHorsham, Alimcd, Enid_Puceflange and 1 other 3 1 Link to comment Share on other sites More sharing options...
Popular Post Alimcd Posted April 26, 2022 Popular Post Share Posted April 26, 2022 (edited) Trying out some Pandora grips for one of my Capas Edited April 26, 2022 by Alimcd Tackle, Nick G, Enid_Puceflange and 3 others 6 Link to comment Share on other sites More sharing options...
JimFromHorsham Posted April 28, 2022 Share Posted April 28, 2022 Big iron day well , big heavyweight abs day 😛 Lozart, Druid799, Tackle and 1 other 4 Link to comment Share on other sites More sharing options...
Supporters Popular Post SeniorSpaz87 Posted April 28, 2022 Supporters Popular Post Share Posted April 28, 2022 Alright, *now* my MTW is externally done. Still need to tune it properly and add some “softening material” to the front for it to be 100% inside, but I’m really loving how it’s turned out, as long as I ignore the cost haha. Nick G, Hellfish, captaINstraiTJacket and 5 others 5 3 Link to comment Share on other sites More sharing options...
MAX DICKER Posted April 28, 2022 Share Posted April 28, 2022 3 minutes ago, SeniorSpaz87 said: Alright, *now* my MTW is externally done. Still need to tune it properly and add some “softening material” to the front for it to be 100% inside, but I’m really loving how it’s turned out, as long as I ignore the cost haha. I'm a big fan of the UBR, that's a great choice. Is that a RS Geissele mount? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now