Popular Post Skara Posted May 22, 2020 Popular Post Share Posted May 22, 2020 Added the VisionCunt optic to my arp9 for those PCCs vibes. Nick G, SeniorSpaz87, GeorgePlaysAirsoft and 7 others 6 3 1 Link to comment Share on other sites More sharing options...
E21A Posted May 22, 2020 Share Posted May 22, 2020 1 hour ago, Skara said: Added the VisionCunt optic to my arp9 for those PCCs vibes. That’s not the standard front rail is it? Link to comment Share on other sites More sharing options...
Skara Posted May 22, 2020 Share Posted May 22, 2020 30 minutes ago, E21A said: That’s not the standard front rail is it? Nope, it's the Ares Octarms M-Lok rail. A steaming pile of shit that will be replaced with something better, that doesn't require a plastic bridge with the receiver to make it sit flush. Link to comment Share on other sites More sharing options...
Tec-Spek Posted May 23, 2020 Share Posted May 23, 2020 On 20/05/2020 at 22:00, MagpieAirsoft said: Nice! What mount do you have for your pressure switch? Pics? Thanks, For the flashlight it's 3M padded tape (I forget the exact one right now) onto the rail as pic. The perst has a mount built in as part of the switch. MikeMarden, Monkman and MagpieTactical 1 2 Link to comment Share on other sites More sharing options...
Supporters Popular Post SeniorSpaz87 Posted May 23, 2020 Supporters Popular Post Share Posted May 23, 2020 So guys, I need y’alls opinions. So I have this MP7: Now do I leave it as an a1 or convert it to an a2? If you’re unaware the process involves permanently removing the folding grip and replacing it with a rail. I did this to my GBB MP7. However the folding grip on this AEG variant is much sturdier, so I don’t necessarily have to convert it. Hence wanting opinions. To avoid filling the section with replies, just vote a1 with the “like” react and a2 with the “coolAF” react. For comparison - A1 vs A2 TM MP7 L3wisD, PopRocket123, SSPKali and 3 others 3 3 Link to comment Share on other sites More sharing options...
Skara Posted May 23, 2020 Share Posted May 23, 2020 25 minutes ago, SeniorSpaz87 said: To avoid filling the section with replies, just vote a1 with the “like” react and a2 with the “coolAF” react. Nice try to increase your reputation mate. A1 btw Link to comment Share on other sites More sharing options...
Supporters SeniorSpaz87 Posted May 23, 2020 Supporters Share Posted May 23, 2020 2 minutes ago, Skara said: Nice try to increase your reputation mate. A1 btw Lol didn’t even think of that. Link to comment Share on other sites More sharing options...
MagpieTactical Posted May 23, 2020 Share Posted May 23, 2020 17 hours ago, Tec-Spek said: Thanks, For the flashlight it's 3M padded tape (I forget the exact one right now) onto the rail as pic. The perst has a mount built in as part of the switch. Cheers. Thats cool as hell. FreeFrag.UK and Tec-Spek 1 1 Link to comment Share on other sites More sharing options...
RonLancs Posted May 23, 2020 Share Posted May 23, 2020 On 07/05/2020 at 16:13, Tackle said: By the time guys get to that level it'll be like teaching Nana to suck eggs lol, I'm just wondering how intense the system is nowadays to ensure man & machine work as one. As a young squaddie in the rgj, the emphasis on marksmanship was immense, including the tailoring your rifle. Obviously the quality of our servicemen (& women) is still top notch, maybe any serving players can comment on weapon personalisation & emphasis nowadays ? Haha my WHT on the GPMG lasted all of 10 mins... never even held one in depot and within a day of being at battalion I was lugging it around with 700 rounds and a spare barrel... Tackle 1 Link to comment Share on other sites More sharing options...
RonLancs Posted May 23, 2020 Share Posted May 23, 2020 On 15/04/2020 at 20:46, Asomodai said: The latest addition to the stable! Cybergun/A&K fully licensed M249 Para SAW. Any ex squaddies out there who can still hear their old section commander in depot? “GET THAT F****** HANDLE DOWN” Seeker Bravo and Talltom 2 Link to comment Share on other sites More sharing options...
Popular Post PopRocket123 Posted May 26, 2020 Popular Post Share Posted May 26, 2020 Finally got the folding stock adapter fitted to my AEG. It's not completely done as I need a receiver end plate but it works as a proof of concept. It's actually really practical as it means I don't need to take the stock off to change the battery or have a stupidly long screwdriver to take the buffer tube off Tec-Spek, Nick G, DarkAssassin and 2 others 4 1 Link to comment Share on other sites More sharing options...
Davegolf Posted May 26, 2020 Share Posted May 26, 2020 Nice, probably adds a little rear weight which is good too? Link to comment Share on other sites More sharing options...
PopRocket123 Posted May 26, 2020 Share Posted May 26, 2020 29 minutes ago, Davegolf said: Nice, probably adds a little rear weight which is good too? It's only a couple hundred grams and it's right over your hand so it's hardly noticeable Link to comment Share on other sites More sharing options...
Albiscuit Posted May 28, 2020 Share Posted May 28, 2020 @SeniorSpaz87 I am about to chop the grip off of my MP7, wish me luck lol RonLancs and Tackle 1 1 Link to comment Share on other sites More sharing options...
RonLancs Posted May 28, 2020 Share Posted May 28, 2020 44 minutes ago, Albiscuit said: @SeniorSpaz87 I am about to chop the grip off of my MP7, wish me luck lol #prayforAlbiscuit Tackle and Albiscuit 2 Link to comment Share on other sites More sharing options...
Albiscuit Posted May 28, 2020 Share Posted May 28, 2020 With my Luck I’m likely to turn it into a sawn off mp7/pistol hybrid 😂 Link to comment Share on other sites More sharing options...
Supporters SeniorSpaz87 Posted May 28, 2020 Supporters Share Posted May 28, 2020 48 minutes ago, Albiscuit said: With my Luck I’m likely to turn it into a sawn off mp7/pistol hybrid 😂 Lol, just take it nice and slow. Use a dremel if you have one. Heres the guide several of us have used. https://atrg.blog/2019/04/22/how-to-install-a-wilcox-a2-front-rail-on-the-tokyo-marui-mp7a1/ Albiscuit 1 Link to comment Share on other sites More sharing options...
Albiscuit Posted May 28, 2020 Share Posted May 28, 2020 I have that guide memorised thanks. Have everything needed, I just need to dig out the dremel (el cheapo version I have anyway) and check I have the correct disks for it. SeniorSpaz87 1 Link to comment Share on other sites More sharing options...
Skara Posted May 28, 2020 Share Posted May 28, 2020 49 minutes ago, Albiscuit said: I have that guide memorised thanks. Have everything needed, I just need to dig out the dremel (el cheapo version I have anyway) and check I have the correct disks for it. Can't wait to see the new MP3.5! Talltom 1 Link to comment Share on other sites More sharing options...
Albiscuit Posted May 28, 2020 Share Posted May 28, 2020 No pressure then Link to comment Share on other sites More sharing options...
Albiscuit Posted May 28, 2020 Share Posted May 28, 2020 @Skara is that scope REALLY called a vision cunt? 😂😂 Link to comment Share on other sites More sharing options...
Skara Posted May 28, 2020 Share Posted May 28, 2020 Just now, Albiscuit said: @Skara is that scope REALLY called a vision cunt? 😂😂 Nah, it's called Vision King. It is just me trying to be clever Albiscuit and Ropeyshep 2 Link to comment Share on other sites More sharing options...
PewPew_JB Posted May 28, 2020 Share Posted May 28, 2020 CYMA 0.41 MP5SD6 EDcase, Enid_Puceflange and Tec-Spek 3 Link to comment Share on other sites More sharing options...
MILITATED Posted May 29, 2020 Share Posted May 29, 2020 Coolest gun I've had! Not sure which optic to go for though. Albiscuit, PopRocket123 and EDcase 3 Link to comment Share on other sites More sharing options...
PopRocket123 Posted May 29, 2020 Share Posted May 29, 2020 2 hours ago, BigBlackGlock said: Coolest gun I've had! Not sure which optic to go for though. RMR on a cantilever mount Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now