JackHG Posted July 12, 2015 Posted July 12, 2015 Woo, finished. Although might still add a sight..still undecided which H I'd say holo sight would look best
Popular Post Baz JJ Posted July 13, 2015 Popular Post Posted July 13, 2015 RILiON, Airsoft_Mr B, Lozart and 3 others 6
Supporters M_P Posted July 13, 2015 Author Supporters Posted July 13, 2015 Woo, finished. Although might still add a sight..still undecided which Any idea whether those CASVs would fit a WE
GingerBreadMan Posted July 13, 2015 Posted July 13, 2015 Any idea whether those CASVs would fit a WE I think that is a WE, aeg though. I don't know about fitting he might but the aeg and gbb are probably of different dimensions
Adam3088 Posted July 13, 2015 Posted July 13, 2015 Any idea whether those CASVs would fit a WE Yup it's the WE AEG, it does fit as long as you're prepared to do a good bit of modifying. Same dimensions as the GBB I think.. Can write up a brief guide on how I did it if you're interested, needed a dremmel, hacksaw, drill, fine sand paper, Krylon, two blocks of wood, needlenose pliers, a thread tap and various other bits I've probably forgotten.
Supporters Airsoft-Ed Posted July 18, 2015 Supporters Posted July 18, 2015 Mack, CES_williamson and Monty 3
Supporters Airsoft-Ed Posted July 18, 2015 Supporters Posted July 18, 2015 And a few more for good measure. Trying to pick a thumbnail to use for my review video. CES_williamson and Monty 2
joshcowin Posted July 18, 2015 Posted July 18, 2015 Woo, finished. Although might still add a sight..still undecided which drolls over keyboard that front finishes it off lovely
Adam3088 Posted July 18, 2015 Posted July 18, 2015 drolls over keyboard that front finishes it off lovely Thanks, wrote a brief guide on how to fit in to WE Scar's if you're interested in doing it yourself, think it should work the same on the H. Fairly sure the upper receiver is pretty much the same..
Popular Post SgtTalbert Posted July 22, 2015 Popular Post Posted July 22, 2015 Will post a better picture once its fully finished...However, here is my Ares Vz.58 compact so far Will end up looking something close to this: Sappysid101, Samurai, CES_williamson and 4 others 7
Happy Posted July 22, 2015 Posted July 22, 2015 Will post a better picture once its fully finished...However, here is my Ares Vz.58 compact so far Will end up looking something close to this: Nice one mate. How does it shoot? I'm tempted to get one to finish off my czech loadouts but I can't justify the price since Ares made it and they have a bit of hit or miss record with their guns.
SgtTalbert Posted July 22, 2015 Posted July 22, 2015 Nice one mate. How does it shoot? I'm tempted to get one to finish off my czech loadouts but I can't justify the price since Ares made it and they have a bit of hit or miss record with their guns. Shoots well, nice trigger response - Not used full auto as I only play at a SS site. However, not used it in game yet. It's very solid and well built. Quite heavy for such a small rifle Yeah, I hear you about hit and miss, however, my M60 has never missed a beat and I managed to get the rifle + mag adapter inc shipping for £190 so was happy with it. Lozart and Happy 2
Popular Post Zak Da Mack Posted July 23, 2015 Popular Post Posted July 23, 2015 Got all the externals for my sr25 now, time to head into the gearbox and do the shims, AoE and install a sorbo pad. Not sure if I should hard wire the mosfet in or not Lozart, proffrink, Airsoft_Mr B and 3 others 6
Supporters TheFull9 Posted July 23, 2015 Supporters Posted July 23, 2015 Your KAC triple tap brake is off, the centre most cut of those grooves that run in line with the axis of the bore should be at 12 o/clock ideally. If you're not bothered then hey no matter, just FYI. Not many AR-10s around so I always like to see them, the rifle itself looks good. Any reason for only the front iron sight out of interest? Airsoft_Mr B 1
Root Admin proffrink Posted July 24, 2015 Root Admin Posted July 24, 2015 <snip> Looks nice. Maybe a perspex sacrificial insert for the scope and remove that flip up one? They can be had for about two for £3 from eBay in whatever size you desire. TheFull9 1
n1ckh Posted July 24, 2015 Posted July 24, 2015 That's what I've done with my scope, I made the perspex fit inside the flip ring & took the flap off I bought an A4 piece of perspex from my local rc shop & made 4 of them TheFull9 1
Root Admin proffrink Posted July 24, 2015 Root Admin Posted July 24, 2015 Yup. I got my laser cut on eBay and then just threw an o-ring in to offset it from the objective a little. I managed to unscrew the retention ring inside too so it doesn't interfere with the scope covers at all - works an absolute charm. n1ckh 1
n1ckh Posted July 24, 2015 Posted July 24, 2015 I'm one of those people who try to make it rather than buy it & it certainly does the job
Happy Posted July 24, 2015 Posted July 24, 2015 My newest addition to the armoury. Paints a bit battered but shoots well enough down the garden. She just needs a suitable name now! proffrink, Zak Da Mack, Ian_Gere and 1 other 4
Root Admin proffrink Posted July 24, 2015 Root Admin Posted July 24, 2015 Battered paint looks brilliant on that imo. Just needs a really screwed up POSP. Airsoft_Mr B 1
Happy Posted July 24, 2015 Posted July 24, 2015 Battered paint looks brilliant on that imo. Just needs a really screwed up POSP.Yeah I just have to find one for the right price. The scope on it at the minute is practical enough for the time being till I next get paid. proffrink 1
Popular Post SgtTalbert Posted July 24, 2015 Popular Post Posted July 24, 2015 One step closer... Adapter turned up today....here it is with my suppressor (I know Stonebridge doesn't have the KAC style, however, I had this already and I like it on there) Adam3088, Lozart, Ian_Gere and 5 others 8
Supporters Lozart Posted July 24, 2015 Supporters Posted July 24, 2015 One step closer... Adapter turned up today....here it is with my suppressor (I know Stonebridge doesn't have the KAC style, however, I had this already and I like it on there) To be fair he has the KAC one on his M4 so you could argue that it's just been swapped over.... Airsoft_Mr B and SgtTalbert 2
SgtTalbert Posted July 24, 2015 Posted July 24, 2015 To be fair he has the KAC one on his M4 so you could argue that it's just been swapped over.... brilliant idea...if anyone pulls me for it, that line shall be used! Lozart 1
Supporters Popular Post Shizbazki Posted July 24, 2015 Supporters Popular Post Posted July 24, 2015 Well i suppose i should bust out the guns from the Armoury then: Not shown in the list below is also my Mancraft Powered TM VSR-10, still some stuff to do to that like getting a wooden stock and a proper more secure bipod. WE M9 Beretta in Resident Evil STARS logos etc, have about 3 Gas and 4 CO2 Mags for this thing KSC M93R in all metal construction, have about 4 x 39rds mags for this, looking to get the stock sometime later G&G G733 Revolver, got about 18 shells for this and one speed loader, got for the s**ts and giggles and is only used for back yard plinking as reloading this in a skirmish would be annoying as hell Krytac Trident CRB, just an M4, used mostly as a loan gun to friends and family when they come Airsofting, some cheapo KAC QD Silencer, Clone MAGPUL MBUS Sights and Clone MAGPUL Angled foregrip G&G MP5 A5 modified to have a different RAS Rail at the front with a PEQ box attached, got about 4 mags for this and a clone EoTech 551 holo sight, again another loan gun for friends and family KWA Kriss Vector, a heavily modified Vector, custom spray paint job done by me (and properly too disassembly, primer, paint, lacquer etc etc), got about 7 mags, ModelWorks RAS hand guard, clone SureFire Scout light, 300mm TBB inner barrel with external barrel to go with too, NPAS, Right hand Mag release set G&G TR4-18 (HK 416) This is my gun, the one that will always go with me to games, this nobody borrows, has a Gleissel Rail at the front end, KAC QD Silencer by G&P, front Vertical grip, (not shown) Real steel SureFire Scout Light, Contour ActionCam mount, Real Steel EoTech 552 Holo Sight The future, plan on getting a longer barrelled M4 like weapon using M4 Mags (so that mags can be interchangeable), Polarizing it and using it as a DMR with maybe a real steel Leupold Sights. Monty, CES_williamson, JamesAirsofterAgent and 4 others 7
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now