GingerBreadMan

Ive got an IMI one (for glock 17) and it equired a bit of sanding and modification but its a perfect fit. Ive heard that they work in glock 21 holsters perfectly but havent tested this.

Yeah everyone expected Uruguay to do poorly against the Aussies but not with a point difference like that. However the real surprise during the World Cup has been that Japan game. I thought England looked alright against Wales for the first part but went downhill.

i know it's a bit late but I thought I'd post anyway. This is a discussion thread from the RWC 2015 if anyone's watching or following it. feel free to discuss anything and have predictions Let's start off with Australia Uruguay 65-3 pretty good score for the wallabies there

Ah okay then,thanks for trying it's much appreciated. I'll bear with the plastic one for now then or have a go at modifying a normal one

I'm not sure how much it had had through it but I think it's an older one. The internals that need replacing aren't that bad it's just the over use of grease that's the worst. If you could it would be very helpful,the inly thing is it had 4 lugs, the ones in your site appear to have 2. Anyway if it works I'll be ordering one.

Yeah, its the 19.7 one i guess. Ordered all the parts except the spring guide and motor for the moment and yeah it is quite niuce to work on. Hop up doesnt really need much, just get the gearbox going well first i think

Ive measured the nozzle, its just over 19mm. Anyone know one of the same size? Never mind an AK one should fit

h I'll try and replace just the arm. The hop up ales screws into the gearbox so can't be replaced but it's alright anyway, metal one. Could try that with the spring guide actually And yeah it's the one from here, pretty happy with the deal on it bit of a change from an m4

Cheers Duck. I was worried that the spring guide would be as although ita a bearing one its plastic :/ Yeah the one in there looks like a normal cylinder head thought id actually linked the plastic one lol and yeah i dont fit the bearings either. Probs not going to go all metal yet if at all, especially when replacing all of this at once. Get it running well together first then maybe swap out i think.

So i just got a UAR the other day and upon opening the gearbox.... woah. It was disgusting and ill link some pictures. Anyway i need to replace some crap/broken parts and have some questions. Does anyone know what nozzle the gearbox takes? and as the gearbox is a quick change spring system can i replace the spring guide? And finally anyone know if a standard AK hop unit is compatible? It uses a slightly different one, ill take a photo tomorrow Here are the parts im thinking of: http://www.ak2m4.co.uk/internal-parts/bushings-shims/zci-bushings-7mm http://www.ak2m4.co.uk/internal-parts/cylinder-heads/zci-cylinder-head-aluminum-v2-v3 http://www.ak2m4.co.uk/internal-parts/pistons-heads/zci-piston-head-aluminium http://www.ak2m4.co.uk/internal-parts/pistons/zci-piston-with-one-tooth-reinforced (or are the SHS ones THAT much better?) am probably going to get a flat nub and g&g green or prommy purple too cylinder head piston (there was literally zero compression with this! no resistance when pushing through the cylinder!) Spring guide

shouldnt be loads, if you shop around and order from asia the prices are greatly reduced. You can start off with the gun and just one mag for a bit really. You just dont want to buy really cheap eyepro however as your eyes are quite important. Read this also: http://www.airsoft-forums.co.uk/index.php/topic/17294-ians-guide-to-noobism-on-a-tight-budget/

UKARA simply put is a list of known registered skirmishers in the country. A UKARA membership serves as a defense against the VCRA, an act that effectively bans RIFs(non two tones) However, as you have a defense(your UKARA) you can manufacture,purchase and import one. You get your UKARA by attending a site that is registered and going to three games in no less than three months. Basically for the first games you should rent a gun and try it out and then purchase once you have UKARA Read these for a bit more: http://www.airsoft-forums.co.uk/index.php/topic/12-vcra/ - provides link to VCRA http://www.ukara.org.uk/ Aside from that - welcome to the sport and forum. Whats your budget? Usually we recommend G&G combat machines, cyma AKs and JG g36s all about £100-150. youll need mags,batteries,charger,eyepro,and boots as well though

And another one! A quote from ed about this here: My brother used to have one of those P90s pre-VCRA. The mag has a ramp in it to make it 100% gravity fed and the box quotes 0.08J Shoots barely 15ft and fires faster than it feeds. Which is still slow as fuck.

£220 for a stock well mb03?

Glock. Good for the money and better than most for the price. Just anything but the hi capa tbh, WE ones aren't rated highly

Turn it into a claim on paypal; they should side with you. I would certainly be wary of sending it back as then he has both your money and the gun. Dont forget to leave feedback on here as jcheeseright and monty mentioned

Remove the motor and preferably pistol grip and disengage the AR latch. Can be done using a paper clip

I think most people have a different interpretation here..... I think the OP means that his guns are here and when he visits he wants to take them back to the USA with him meaning he needs an orange tip and is asking for people here to send them to him for when he imports them into the USA. But..... I may have read it wrong and everyone else be right and yeah orange tips don't do anything really here

Perhaps a word of advice to anyone reading this; maybe ask the seller for a video of the gun firing. I have done this before for things i have sold and it proves that it is working when you purchase it. That way you can be sure that it was once working

Happened to one of my g17 mags, yeah glue it back together it worked for me

Can also comment on the great customer service here. Ages ago when i had no clue, i took my gun there as it wasnt working (piston stripped). They played with the motor height and then concluded that something stripped and suggested instead of them doing it, i do it myself. They weren't trying to force their services or a sale on you there and just gave friendly helpful advice to someone who really didnt know much about the sport at the time

How much was it all together new?

Wow that looks great, certainly different. Particularly liking the short barrel and eotech. Are you a member of the heretics group on facebook?