Leaderboard

Anyone needing their "street Sweeped?"

You're just jealous that I can fit through those pissy little Victorian loft hatches to get to the header tank. 😜

I know the mk23 isn’t to everyone’s taste, but still a bit harsh

I run a hard case when visiting sites, as I take a couple of different rifs, I haven’t bothered cutting foam to allow one case to be used for several pewpews I got a 5.11 Cams which I put Shadow Foam into Used it once Its just too damn big 😂

I've got some lead soldiers in the loft. The kids used to play with them when they were babies. 😉

I know... as I typed it I looked at my pews and thought I don't need this big a collection either, the difference in my mind is... I can look at & enjoy my pews but a gun case is really a thing to carry them 10 feet from my front door to the boot of my car, I'll end up getting one eventually but it's low on my list of airsoft priorities (for now). One of these would be nice...

Oh do piss off 🤪

It was horrible getting into your boxer shorts elastic. Then you'd sit in the van and grind it into your waist skin. Made even worse when you got back in the seat the next morning, only to get the remnants pushed back into your skin again. Ggggrrrrrr

Ooh, now that is nice. I'm sort of lucky that i only have 4 pews, for now, and dont really have anywhere to keep them in the house so putting thw3m in cases where i can then stash them out of the way makes sense. I do, as of Saturday, have a spare bedroom so I think that might become 'The Gun Room' with them on display. Then i can add more. 😁

Haha it never fails to be funny. Hammocks and people getting hit in the balls with balls lol. I'm easily amused though.🙂

I'd be better off using a 40yr old sleeping mat, I'd end up on the deck anyway.

This is my Peli Case, Shadow Foam inside and will carry 2 rifles and my pistol quite easily.

Magical leopluradon!

What was the saying about the organ grinder and his monkey? I itch at the thought of a loft nowadays 😃

What is this gibberish? Speak English.

I don't see the reasoning behind your logic! What's need got to do with it? This is Airsoft, it's ALL about want!

Surely they should be "industrial", "medieval", "furure" and "aztec"? Especially if the head marshal is a bald thespian with eccentric taste in clothing

Knobitch makes one. https://eu.novritsch.com/product/portable-gas-container/

Says the guy who wants a Scotch Pie posted 469 miles

I bet they sucked all that lovely lead based paint off them too 😂

Yes and no. There's a lot of crossover in the tabletop gaming community. Have a look through the forums here: https://www.dakkadakka.com/

Hi all, ended up going into my local shop and have purchased a Tm desert warrior, used it on a skirmish on Sunday and I’m happy with it ! Only slight drawback is it’s only doing 2/3rds of a magazine of bb’s on a gas fill, any advice on that or just grab another mag ? As it’s a bit tedious going back to the safe zone to refill between games. I now realise why people get the hi capa but I really like the colours and design of this one !! thanks for all your help

A smear of silicon grease can do wonders there. 1.3J from an M100 and a stock (but stretched-and-greased) CYMA gearbox and nozzle. Yes, quivering on the edge of a Section 5. The difference between nearly sealed and really sealed is remarkable.

A business near me (non airsoft, furniture), has a separate website for their returns or slightly damaged stuff, where the explicitly state items purchased there are non returnable & you should be prepared for possible small issues with items, but in fairness the price are reduced massively, maybe 25% of the original rrp or even less. My granddaughter needed a bigger bed, & they were advertising fancy sleigh bed returns for about 10% of the rrp, I popped in to their warehouse to pick one up, the guy brought 3 big unopened boxes out, BRAND NEW, never touched perfect condition, for 25 quid, result😃 My work here is done🤪

I test all the batteries I buy and return the crap ones. I don't worry about capacity if the IR is low. Give and take...

Air seal as stock on many guns is pretty bad. Just a case of eliminating it step by step. Piston head to cylinder, cylinder to cylinder head, cylinder head to air nozzle (always bad with those plastic ones!) and air nozzle to hop up rubber. With a good air seal I have got 1.05J from an M90 spring

CUSTOM GBB WORKSHOP WW2 COLT M1911A1 SRC gbb airsoft deep marking remove paint detail fix

I tend to stick to Gunman filmsim or milsim type events BUT... I know who's going, and they're a chill lot. Any amateur RSM attempts are squished and the culprits either learn to behave or tend to drift away. They're great fun with the right people.

I did! lol

Bought off here, arrived today, modelled by me to show @sofieb 😁 Oh, it's a Warrior Elite 901.

Esstac kiwi’s tall or mid rise. Excellent retention. If you are using bungied pouches, especially with heavier mags, the bungie needs to be tight enough that you have to positively pull it to get the mag out. If you are staying with the original pouches you can increase the friction by adding grip tape to the mag.

they seem to be OOS everywhere, took me ages to track down a 370mm crazy jet barrel for my kc02 build. I expect a big restock soon

Wolf armouries is a great example, not only did they have a shit eating attitude, I remember a young member on another forum contacting me for advice, long time ago pre vcra, explaining how he'd put a pistol in for repair & when he went to pick it up he was told "you've already collected it", his response was "no I haven't", & Wolf refused to accept they had given it to the wrong person, or alternatively one of the arsehole staff had lifted it ?

Oh myyy......😍 I haven't been following this, but I'm gonna go back and find details! Anyway... This isn't that exciting when it comes to gun pictures, but I'm a happy boy and had to share. Last year I gave a friend my cheapy Cyma SVD, for servicing and upgrading. Then life got in the way. I got a rotator cuff injury, he lost his driving licence (illness, not booze), and what with one thing and another he's had it ever since. On Sunday I got it back. Full steel rack piston, 110 spring, different piston head, new hop rubber, hop nub, new set of bushings for the gears, combat union hop. Its kicking .3s out around 1.4 to 1.5 joules. I'm on site tomorrow, to continue with our site overhaul, and I'll be giving her a real test for range. Now all I need is an SVD sling.

As I've posted before it never ceases to amaze me how so many airsofters are happy to be bent over and shafted by shops with terrible customer service

😁 Well that had the desired effect: Don't know if they reading this thread; but I find it somewhat ironic that if you google "airsoft and consumer rights uk" their website comes top of the listings.

Haven’t done any for airsoft , stuff changes way too quick in my hands 😂 couple of my keeper air rifles I have though 😎

Friend of mine went to a milsim and his CO refused to talk to him because his kit wasn't completely right. Get to fuck.

Second this. I’ve previously had to stick to MICH type helmets and cut the pads in half. I did manage to find some off the market thinner than usual pads that worked with a fast helmet for me before but having recently done exactly as above I can confirm it’s the best fitting and most comfortable option I’ve tried.

My loadout from Sundays game, that @Skullcheweralready posted about in "how did your airsoft day go?". It's subtle, but you might be able to make out my favourite outfit colour. Not shown: 2 radios on my back as I was squadleader. Also not shown: me getting a headache from having to decypher what two different channels are trying to tell me at the same time. 😂

The Mafioso AMT Hardballer (aka the Terminator Pistol) with full stainless internals. Another wall hanger

A couple of shotguns.

Added the peq15 box ad the acog on an aluminium riser, to see over the top of thee peq. So just some pics because I like my new toy.

Quick KS-1 build yesterday afternoon, from a brand new G&G SR15 E3 imported from @redwolfairsoftofficial delivered at 4pm, stripped and painted in NFM Coyote paint, SLK stock, Leupold LCO, Prototype printed Vampir LAM, my own deisngned and printed PRT and sleeve from early 2023, Surefire scout light, PTS grip, 3D printed Unity riser and generic handstoo, additional parts fitted - Deans and Warhead motor @K42J

Magpul’d the Apache , Magache? 🤷🏼‍♂️

Your system draws a lot of current then. I run 7,4v 1450mAh 30c batteries in my M4s and my average BB consumption per game day is about 2000 (say 5/6 fully depleted Lonex Flash Mags). The battery tester I use says that with the above conditions I get my battery from 99/98% charge down to 30ish, now I don't know that the percentage refers to, but all things considered I think my builds are at okay efficiency.. All this in full auto for the most part. Also keep in mind that semi auto fire draws way more than full auto, the current required to get the motor going is much higher than the current needed to keep the motor going once it's already spinning. It's not hard to imagine that thirsty motor + semi spam will deplete an average sized battery in a short time, but 500 shots is definitely a sign that something needs addressed in your gun. p.s. I'm confident I have butchered every electrical term and principle with this comment, sorry, I build houses and survey the land, not an electrician/electrical engineer