Leaderboard

so a third hand gun that's 8 years old of unknown functionality has only devalued by 15 quid that's impressive!

I have a post in the custom guns thread on here but that's a low traffic thread. I also have a Facebook page, Project Peregrine. That's got a post that goes in depth with my design, why I decided to make it and why I came to the design I did. Short version is I wasn't expecting people to be as into this as they have been so I only ever planned on making one using cheap second hand parts wherever possible. The mags were a cheap bundle and the gearbox someone had laying around for spares. The gearbox design uses an ICS split gearbox upper with a custom gearbox lower using standard V2 gears and a short style motor and cage. That's going to be made from laser cut steel side plates and 3d printed infills. This makes it easily converted to HPA as long as you can resolder the trigger to a remote microswitch. The trigger for this uses a BTC Chimera with a remote trigger module and microswitch in the gearbox. The body of the gun is going to be largely 3d printed in at least 6 pieces. I will also be using laser cut steel rails down the sides to add some much needed rigidity and a standard 200mm AEG outer barrel. Mags have been tricky. I got the Uzi ones because they were cheap and available and already had a fitting for an uzi style mag release. Other options I'm looking at for potential future versions are some of the PCC Glock style mags that use the Glock mag catch but I'll consider anything that's reliable, available and not too expensive as long as it has a mag catch design that would work in a pistol grip. That means mp5 and Evo mags are out. The plan for rails and stocks is to make a working gun first but leave replaceable parts of the gun like the forend and rear plate to be modular so I can swap them out with new parts as I design them. I am looking at an MP7 style stock and forends with different rail options. This is all very early days, we haven't even drawn up all of the off the shelf parts and we still need to get our hands on a classic Army X9 mag and/or an Ares m45 mag to get dimensions to know where to put the motor

@AngryPete I’m @Asomodais personal Uber driver (Jokes, we tend to play on and off together and I’m happy to give him a lift when I’m playing or we choose sites and try them out) and there tends to be a spare seat in the car, I’m north London based so next time me and him head out if you can get up towards me (I can pick you up from canonbury or upper Holloway overground or archway tube really easily) then I’m happy to let you know

Well, it's got that "actually exists and is for sale" premium on it. Plenty of places are looking pretty thin on stock at the moment.

Weird evening spent stripping my Polarstar Mk18 down ready to sell for parts. When I finished this build I was fairly confident I wouldn't feel the need for anything else... then my MWS came along.

"i have never fired it. i dont know if the previous owner had used it or not i cant remember, bought it 8 years ago. as far as i know it is in full working order when it was sold to me" = "almost certainly not working now"

I've started designing a machine pistol AEG using a custom gearbox. I'm currently getting accurate drawings of all of the existing parts before I can start drawing up the 3d printed and laser cut parts around them. I got fed up staring at a bunch of parts and mocked up a rough layout of where everything is going and how it should look. I'm really excited to get more done on this.

The final version has been printed! It's been through a couple of redesigns, the bottom rail has been lowered to make room inside, the walls have been thickened, some unnecessary screws have been removed and the m Lok is now to spec. Just waiting for the fittings to arrive and for it to be dropped round and I can finally get it fitted. Then on to the M4 stock adapter...

I got a nuprol XL hard case today and stuck my pulse rifle + shotgun and UGL for my scarh in it: Kinda regret putting the UGL in there and not a sidearm + mags. gonna have to buy a new layer of foam and re-do it. Edit:

Cyma CM045 "Krinkov" Arrived yesterday and I spent today stripping, cleaning and shimming the gearbox (great quality, still with gunky blue grease!) and re-wiring with a 11.1v Li-Ion and Gate NanoHard mosfet Madbull tightbore barrel I had lying around and G&G green rubber / Firefly nub. New O-ring nozzle from AK2M4 arriving tomorrow but not sure I can be arsed to strip it down again 🙄 Outside has been sanded and roughed up, wood sanded and stained. Still more to do on this (and the 5 steel mags!) to give it the true Khyber Pass look. 335fps +/- 4fps and 20rps on full auto 😈 Destined for OPFOR MILSIMS, loaner gun and noisy CQB!

Got bored. Had Paint Pens 😎 Makes the gun looks much nicer I reckon. I think I'll leave the trades on the slide alone, what do we reckon?

Lockdown has made for quite a few changes to the ole-loadouts. Here’s everything in their current form. Eotech will be changing to a much smaller RMR style sight on the AK. AK - LCT base. M140 DSG build running 340fps at 35rps on a 7.4V lipo. Combat union AK hop was a pleasure to install and is the nicest Hop I’ve handled. Makarov is rocking a Maple leaf bucking and tensioner with a crazy jet barrel. M4 - Specna base. M140 DSG Running 300fps at c.50rps on an 11.1V lipo. Jefftron Leviathan gives a 5rd burst instead on full auto as I’m not a total div, despite the Novristch SSP1 and Silver trim. L85 - ICS. Stock internals, rewired to a Gate Nano hard. M14 - Cyma base. Wooden stock. Semi auto locked and bang on 450fps with no hop applied. Gate Nano hard in the stock. Hawke scope is lovely and I would thoroughly recommend!

https://imgur.com/a/JS6m3sn Got this TM Samurai Edge AW01 Custom from avenger63 a month or so ago, got some pick n' pluck foam for the casing so it can hold an extended mag + 3x standard mags in there nicely. I've just added a spring guide buffer to it because there's really nothing else to upgrade internally, it's solid as fuck. I was disappointed that the LAM was only a torch even though it has a faux painted red-dot on the front of it, so I bought one of these from AliExpress for £60, has a torch with strobe function as well as red dot laser. And latest pic of my M41A PR: Think i'm finally happy with it now. Hopefully never have to take it apart again, full internal upgrades on every single part.

416 more or less complete. Ebay receiver has had trades added. Bought a sheet of waterslide decals off the internet, they seem ok if a bit bright. I had to play with the spacing a bit since the receiver already had the 5.56 markings. Decals over coated with several coats of Halfords camo varnish. Trades are noy 100 % accurate by any means , but do the job plenty well enough. I'll tone them down a bit with some washes some time. Complete front end, stock and pistol grip donated by a mate who was having a clear out . Some parts from my own spares draw and a Tomtac gearbox and Bob's your uncle !

CYMA SR47 - review to follow

Updated photo of the 'armory'. Hera Arms CQR, Cyma MP5A4, AA Barrett .50 Cybergun Desert Eagle, Unknown Mac10, WE Luger, ASG Schofield Not pictured are the 1889 Winchester lever action and Mares leg

hahah Yes I've had it since.. well a VERY long time! ...abit like this... Marushin M1 Garand (GBB) with 10x 8rnd clips (8mm) Bespoke CO2 tank in the stock for 16g CO2 cartridges Tanio Koba rifled inner barrel

Recently sold this, but missing it a little. G&G Top Tech MP5.

my collection of primaries. Being the airsoft hipster I am there isnt an m4 in sight. More than half of these were bought broken and repaired.

Light good👍, cigarette bad👎 😛

"I'm the Juggernaut bruh" (Only afterward did I realize how poor the lighting was)