Leaderboard
Popular Content
Showing content with the highest reputation on 31/07/20 in all areas
-
When you Chrono your gun and your bb starts flying around the room and you have to ca
strykerles and one other reacted to Leonine for a status update
When you Chrono your gun and your bb starts flying around the room and you have to call your hits on yourself. 😂2 points -
Hi all, I decided to start with Airsoft again after 8 years and I would like to buddy up with someone around my location to go play with together. I played for 4 years in Czech Republic and stop when I moved to London. So I don't know anyone in this country to play with and as (I believe) most of you know go play by yourself is not best feeling. So is here someone around Stratford (London) or close East London area that would take one team mate under their wing? Thanks for responses Your truly Angry Pete1 point
-
1 point
-
Myself and George play out sometimes. I am based in Dagenham just down the road. I am kind of useless unless you like my company as I cannot drive! I typically head out on the train Essex way to go to a site. But I tend to go to as many as I can get to on Public transport. Check out the SE Tour reviews in the Skirmish review part of the forum. That will give you a good overview of what's around.1 point
-
Looking for Buddy Around Stratford London
AngryPete reacted to GeorgePlaysAirsoft for a topic
Yo I live near stratford - not in a team or anything though - just various combos of friends and mutuals. Gotta say ive not got any skirmishes near london planned just yet but drop me a PM if you want. George1 point -
Macks airsoft dreamers of the week thread
Rogerborg reacted to Adolf Hamster for a topic
there's nothing inherently wrong with doing up a gun how you want, as long as you aren't under any illusions that you are reducing your target market.1 point -
Buy a gun to enjoy it do what ever you want to it. just always assume any paint job will lose by value.1 point
-
Macks airsoft dreamers of the week thread
FreeFrag.UK reacted to PopRocket123 for a topic
That's exactly why I'd probably never sell any of my main guns. They've all been built from parts or boneyard guns and have had hundreds pumped into building them exactly how I want them but I know if it came to selling them, they wouldn't sell for more than £3001 point -
Macks airsoft dreamers of the week thread
Nick G reacted to Enid_Puceflange for a topic
So he joined the forum about two weeks ago, and his only post is this shite advert? I feel we should have a minimum post count before being able to advertise and if they just post up random crap to get to the minimum number, the posts get deleted (I’ve had a bad day at work and am a tad grumpy ✌️)1 point -
Macks airsoft dreamers of the week thread
Rogerborg reacted to Stratton Oakmont for a topic
Looks like a Jackson Bollox1 point -
why do i do this to myself? always gotta make a new challenge, now it's trying to ext
Nick G reacted to Adolf Hamster for a status update
why do i do this to myself? always gotta make a new challenge, now it's trying to extract consistent fps from a gbb.....1 point -
The 'What have you just bought' Thread
GeorgePlaysAirsoft reacted to rj1986 for a topic
I really like the new viper stuff. I got a jacket and trousers in their sale for £45 - sizing is a bit odd, but the jacket i really dig. Trousers i had to go a size down a they didnt have my size - so a touch tight but surprisingly good. Jacket - like i said odd sizing as it's a bit tight in the shoulders but baggy on the forearms. Mind you, i've yet to try it under a plate carrier. But wearing out on a drizzly, muggy day out to Aldi was really good and breathable. edit: so postie turned up today with the last of my summer spending. TM 417 TM 416 Delta Cyre CPC in chunky lover size1 point -
Right, grab a cuppa as this is a long one with charts and graphs! So, having found that my current MWS set up was less than consistent on FPS I decided to play about with the parts I had to find the best (ie most consistent) set up available. Quick Notes: RA Black NPAS - Lose fit in TM nozzle, very lose fit in Angry Gun nozzle (probable source of inconsistency) Requires safety-pin to stop it rotating while using special tool to wind in or out. Hard to see in nozzle when adjusting. Angry Gun adjustable valve - Good fit in Angry Gun nozzle, was too large to fit in TM nozzle. Had a drop of superglue added to rear of grub screw to prevent it unscrewing and flying out the barrel! It was a good tight fit in the screw threads so unlikely. Easy to adjust with allen key, nozzle marked "+ more / - less" on the nozzle to aid adjustment RA Silver NPAS - Had been sanded around circumference to fit smoothly in TM nozzle, was a bit lose in Angry Gun. Easier to see when adjusting it, again it requires safety-pin to stop it rotating while using special tool to wind in or out. Things I did not change: Nuprol Green Gas / v2 MWS magazine, unmodified / 0.28g G&G BBs. Modify Tan Bucking / Laylax hop arm / Crazy Jet 250mm barrel. G&P highspeed buffer / SixG HSB / std recoil spring. Xcoretech X3200 Chrono The weather, sunny 22deg C. All tests conducted out of direct sunlight Dynamic Precision green nozzle cup (moved between test setups) Magazine given a 10s charge, left for 30mins. Given a 4s top-up and left for 5mins between tests What I changed: Initially I used the Dynamic Precision lightweight bolt for tests #1 and #2 Test 1: Angry Gun Nozzle and valve, Dynamic Precision nozzle spring. (GREY plot) Test 2: TM stock nozzle, RA Silver NPAS, Dynamic Precision nozzle spring. (ORANGE plot) Test 3: TM Stock bolt with RA Silver NPAS, Dynamic Precision nozzle spring. (RED plot) Test 4: Dynamic Precision bolt, Angry Gun nozzle, Dynamic Precision nozzle spring, RA Black NPAS (this was conducted a couple of days ago, and kicked off the investigation, otherwise all the same) (BLACK plot) Results: Have a look at the two charts, both have the same data, but the scatter graph has the best-fit line added to aid in looking for the most consistent set up. The setup #3 was the most consistent, but changing to the DP bolt(#2) gave almost the same consistency but slightly higher FPS (maybe more gas efficient?) The one outlier at 305fps spoilt it somewhat so maybe over 20-35rds it might be just as good as #3? The TM bolt, due to the extra weight, gave more recoil, but probably at the expense of gas efficiency. I feel this is an acceptable trade-off as the action was still pretty snappy (thanks in part to the SixG HSB) and full auto was still fast enough. The DP lightweight piston probably saves a little gas and can eke out a few more rounds from a magazine but it will likely be marginal and at the expense of recoil felt (if you want low recoil and high RPS....get an AEG!) Conclusions: The TM Nozzle with the modified RA Silver NPAS seems to be the most consistent, it is likely that the bolt (TM or DP) has little bearing on the outcome in terms of FPS consistency. Recoil and gas efficiency is where these make a difference. The TM Nozzle with the RA Black NPAS (built for the MWS system) is a loser fit and will likely have a wider variance, but not as bad as the larger internal-bore Angry Gun nozzle! (I would guess it would be around the 17-19fps spread...maybe one day I'll check!) So, if you use Angry Gun parts...use the whole thing and don't change out valves/NPAS. Or better yet, if other experiences are to go by, just stick to TM! If you are sticking with TM nozzles try the RA Tech Silver NPAS and spend 5mins with some fine wet&dry carefully sanding the external diameter until it drops in and moves freely. If you can find a Black on that is a suitable alternative...oh and in both cases carry a safety pin in your tool box to adjust it1 point
-
The 'What have you just bought' Thread
Pappa Large reacted to rj1986 for a topic
Got one of these off amazon for 35 quid. Boredom got the better of me whilst waiting for me new shiny expensive stuff. Expected it tail end of September, turned up after 5 days1 point -
Where did you get the handguard and stock from if you dont mind sharing? I have been saying this for a while, I still have ahalf a box of blasters in the garage. As soon as I am through them I am making the switch. Problem is I only use semi auto and I pick my shots so a bottle can last me ages.1 point
-
The 'What have you just bought' Thread
Pappa Large reacted to Caj109 for a topic
1 point -
Purchases made within last 60 days or so after I’ve found I’m not being laid off and coming back to work: - WE G17 and 4 magazines and Nuprol paddle holster (missing a screw), second hand from user Pigeon_Haris - FAB DEFENSE COBRA folding brace for Glocks from AliExpress - Nuprol NX400 torch&laser combo, extended Glock magazine (Raven or Vorsk, can’t remember - same shit) at Airsoft-Imports.co.uk, waiting to be picked up when I attend next game day.. - Razor UH-1 holographic sight with 3x magnifier from AliExpress (£115 bargain! It’s so good quality that I’m taking it with me on my next holiday and gonna check if it holds zero on real 5.56 firearm) - Magpul copy angled foregrip for M-LOK from AliExpress - CYMA CM.077 Antonov (AK-102 with Magpul style furniture) + 3 high cap magazines + Magpul style foregrip + Nuprol Eotech clone, almost new from user Zargorius - 3 mid-cap CYMA AK magazines (same style as high-caps that came with CM.077) as well as folding Zhukov style stock made by CYMA for said AK, 3x 120rd M4/AR-15 magazines made by Kublai from TaiwanGun.com - ICS HERA CQR SSS with one mag and a 7.4v lipo, upgraded 30k motor and maxx model hop unit with pdi w hold hop rubber. As well as an ICS aluminium o-ring air nozzle and ultimate cylinder head with m95 spring. Second hand from user Keith_1701 - 4x second hand Ares mid cap magazines because said Kublai ones while very nice, they wobble out of ICS HERA.... from user Avi, not here yet as I just made payment - Zenit.co (Chinese copy with trademarks) B10M lower handguard from AliExpress for my CYMA CM.045C (changed handguard to Plum due to lack of availability of wooden handguard sets, original CYMA aluminium handguard is horrendous and makes gun too damn front heavy) - ICS MX5 CES-P MS1 S3 SFS + Nuprol NP Point HD-1 Red Dot Sight (not sure if it’s working, don’t have batteries to try it out) + 11.1v lipo + swordfish rail (assuming CYMA make), 4 ICS hi-cap magazines, CYMA dual-mag hi-cap (that one funnily enough fits and feeds no problem but only SRC mid-caps are fitting this gun, every other make is slightly too big to fit into the mag well), bunch of freebies (patches etc.) via Prefire.co.uk from user Nickorellidimus - 5x SRC 50rnd MP5 “mid-caps” (more like low-caps amrite boys? Mag empty in about 2s firing from new MP5 on 11.1v) from AirsoftPro.cz just because I hate hi-cap rattle with burning rage - shop is good but postage to UK is outlandish... might as well order from HongKong. - got two-tone CZ-P09 with threaded outer barrel and raised sights with 1x CO2 mag and 3x green gas mags from a local dude that figured Airsoft isn’t for him after all, super bargain - need to get unpainted slide though and they seem to be out of stock everywhere... - also was scammed trying to buy two-tone ARP9 but got money back thanks to combined efforts of moderator L3wisD and owner of the KydexCustoms - Taig who has handed over evidence to local police (scammer was from the same city. Thank you again! -Also I have nearly new Tokyo Marui Kel-Tec KSG lined up after payday, sadly without any extras but still a bit cheaper than new from shop so there’s that. Now that I listed all that I’m terrified of myself and if I had a wife, she would definitely rip me a new one and file for a divorce 😂 Do I NEED all of that? Do I have storage space for it? No. But I sure as hell DO WANT it. Now I’m eating nothing but dry rice for the next 3 months 👌🤣 Some of the new arrivals pictured together: Other than Kublai magazines refusing to stay latched inside HERA no lemons. Very pleased overall.1 point
-
Yeah, pricy but useful as you say. Hey, if it works for you 👍1 point