Jacob Wright Posted June 7, 2023 Share Posted June 7, 2023 19 hours ago, Dan Robinson said: Ooohhh. Where are these hiding in the Internet? On the classifieds a few months ago, otherwise good luck finding one! Link to comment Share on other sites More sharing options...
Dan Robinson Posted June 7, 2023 Share Posted June 7, 2023 23 minutes ago, Jacob Wright said: good luck finding one! This I am discovering. Rogerborg 1 Link to comment Share on other sites More sharing options...
Jacob Wright Posted June 7, 2023 Share Posted June 7, 2023 I’ve been after one for a while. I tend to keep an eye out so if I see another one I’ll bare you in mind 👍🏼 Link to comment Share on other sites More sharing options...
Supporters SeniorSpaz87 Posted June 7, 2023 Supporters Share Posted June 7, 2023 I use mag couplers now; these are my gotos for both real ARs and airsoft: Link to comment Share on other sites More sharing options...
Popular Post mightyjebus Posted June 8, 2023 Popular Post Share Posted June 8, 2023 So this one was a bit of a gamble. listed as boneyard on BBguns4less with no details of the issues. I had a few NGRS AK parts floating around so I bought it and when it arrived it was missing the fire selector lever that sits inside the receiver and is attached to the fire selector. The hop dial, which sets the hop, was snapped off and missing. Luckily I has a spare selector lever and I replicated the dial from another of my NGRS AK's and 3D printed it and it works well. It looks like this was a brand new, in the box, AEG that they robbed for parts - very happy with the result. And I also picked up a Canik TP9 whcih fires differently from about 99% of other airsoft pistols. It's striker fired, not hammer fired, and I quite like it. but me being me, I couldn't leave it alone as the extended mag release tended to dump the mag when holstered in my Warrior universal holster so off the the 3D printer again to make a 3mm thick extension to replace the standard 5mm version that comes with the pistol. Pinovic, lokkers, Skullchewer and 2 others 5 Link to comment Share on other sites More sharing options...
Ebeneezer Goode Posted June 10, 2023 Share Posted June 10, 2023 On 07/06/2023 at 20:17, SeniorSpaz87 said: I use mag couplers now; these are my gotos for both real ARs and airsoft: Nice - although the skinflint Scot in me would still just use tape 🤣 Dan Robinson, Jacob Wright and gavinkempsell 3 Link to comment Share on other sites More sharing options...
Popular Post mightyjebus Posted June 10, 2023 Popular Post Share Posted June 10, 2023 Had a broken tappet plate and since I was in there I fitted a NanoAAB mosfet. It's a Tokyo Marui M14 with a wooden stock and firing at 330 FPS on 0.2g. I'll be using it this weekend as I've got a woodland day. I'm still deciding if I want to S hop it or not. The range on the M14, straight out the box, is pretty impressive so do I need to tinker with it? JimFromHorsham, Leo Greer, Pinovic and 3 others 3 3 Link to comment Share on other sites More sharing options...
Ebeneezer Goode Posted June 10, 2023 Share Posted June 10, 2023 Just now, mightyjebus said: Had a broken tappet plate and since I was in there I fitted a NanoAAB mosfet. It's a Tokyo Marui M14 with a wooden stock and firing at 330 FPS on 0.2g. I'll be using it this weekend as I've got a woodland day. I'm still deciding if I want to S hop it or not. The range on the M14, straight out the box, is pretty impressive so do I need to tinker with it? Nope - if it works, don't feck with it... Nice piece too. Eezer G Link to comment Share on other sites More sharing options...
Skullchewer Posted June 10, 2023 Share Posted June 10, 2023 2 hours ago, mightyjebus said: Had a broken tappet plate and since I was in there I fitted a NanoAAB mosfet. It's a Tokyo Marui M14 with a wooden stock and firing at 330 FPS on 0.2g. I'll be using it this weekend as I've got a woodland day. I'm still deciding if I want to S hop it or not. The range on the M14, straight out the box, is pretty impressive so do I need to tinker with it? Nah leave it be. Link to comment Share on other sites More sharing options...
gavinkempsell Posted June 10, 2023 Share Posted June 10, 2023 (edited) 9 hours ago, Ebeneezer Goode said: Nice - although the skinflint Scot in me would still just use tape 🤣 snipers tape I hope to at least pretend it's 'upgraded'? Tut, tut... giving us jocks a bad name. Edited June 10, 2023 by gavinkempsell Ebeneezer Goode 1 Link to comment Share on other sites More sharing options...
Ebeneezer Goode Posted June 10, 2023 Share Posted June 10, 2023 36 minutes ago, gavinkempsell said: snipers tape I hope to at least pretend it's 'upgraded'? Tut, tut... giving us jocks a bad name. Pfft nah, Poundland's finest gaffa tape. I'm no made o' pounds... gavinkempsell and Nick G 2 Link to comment Share on other sites More sharing options...
Popular Post CrackCommandoUnit1972 Posted June 11, 2023 Popular Post Share Posted June 11, 2023 Thought I would treat myself to a new optic for the HK 416a5 Mantle, Nick G, Dan Robinson and 2 others 4 1 Link to comment Share on other sites More sharing options...
RostokMcSpoons Posted June 11, 2023 Share Posted June 11, 2023 4 minutes ago, CrackCommandoUnit1972 said: Thought I would treat myself to a new optic for the HK 416a5 Great minds think alike... CrackCommandoUnit1972 and Nick G 2 Link to comment Share on other sites More sharing options...
Nick G Posted June 11, 2023 Share Posted June 11, 2023 Love mine on the long L119 A2 CrackCommandoUnit1972 and RostokMcSpoons 2 Link to comment Share on other sites More sharing options...
Popular Post Pupa2794 Posted June 11, 2023 Popular Post Share Posted June 11, 2023 Managed to find a HWS 1858, bonus is it's a long one. Well, a pair in all fairness. I'm not too fussed about boxes but these have Clint Eastwood on the cover so that's gotta be worth +10 tactical Nick G, Pinovic, EDcase and 2 others 3 2 Link to comment Share on other sites More sharing options...
Popular Post MILITATED Posted June 15, 2023 Popular Post Share Posted June 15, 2023 (edited) Here they are VFC MK11 MOD0 SR-25 & VFC MK20 SSR, both GBB & both absolutely stunning! Dream to finally have the MK11 I have a thing for chunky straight mags Edited June 15, 2023 by MILITATED Alimcd, Lozart, Nick G and 6 others 3 6 Link to comment Share on other sites More sharing options...
OTH21 Posted June 17, 2023 Share Posted June 17, 2023 Filling the void of no pewing for a few months (bloody work shifts) by tinkering with my AKs. Put my RPK back to wood stock and put a folding stock on my AK. Keeping the side folding reciever because I know I'll want to put it back on an AK in the future. Next pewing will be first weekend of August at Battle Lakes. May have to say goodbye to the RPK within the year due to a possible move to London as a mature student. So I need to give it a good few run outs. Pinovic, AirsoftTed and gavinkempsell 3 Link to comment Share on other sites More sharing options...
Kls77 Posted June 17, 2023 Share Posted June 17, 2023 My wall above computer atm ...... OTH21, Pinovic and Dan Robinson 3 Link to comment Share on other sites More sharing options...
gavinkempsell Posted June 17, 2023 Share Posted June 17, 2023 3 hours ago, OTH21 said: May have to say goodbye to the RPK within the year due to a possible move to London as a mature student Give us a shout if & when that happens. OTH21 1 Link to comment Share on other sites More sharing options...
Popular Post mightyjebus Posted June 18, 2023 Popular Post Share Posted June 18, 2023 It would seem I'm developing a bit of a B&T obession. AirsoftTed, Ronin0033, Dan Robinson and 4 others 6 1 Link to comment Share on other sites More sharing options...
Popular Post Whats Posted June 19, 2023 Popular Post Share Posted June 19, 2023 G3 SBS build im 90% there with. Just need a collapsing stock (if anyones parting with one or has one knocking about ) Talk about labour of love! Lots of blood sweat tears and swearing. Just need to refit the mock bolt. Ground up rebuild inside and out. Only thing that’s left of the original TM MC-51 is the fire selector and stock. Internally complete ULTIMATE 8mm gear box, 16:1 cnc gears, 35000 boost motor, GATE Titan 2, ultimate compression set, guarder rubber & nub on a madbull python. G&G navy lower & Magnesium upper. Very bodged JG front end that only needed 15 minutes of dremelling 😂 Nick G, AirsoftTed, Skullchewer and 3 others 4 2 Link to comment Share on other sites More sharing options...
Jacob Wright Posted June 20, 2023 Share Posted June 20, 2023 Getting close to completion now, just need to sort some more rail covers and potentially some Liquid Metal to adapt the foresight. That said, I'm happy with it being a passable-at-a-distance L119 build. Probably not going to get a chance to run it until August now due to work/weddings/holidays but I'm really happy with how it's turning out AirsoftTed, JimFromHorsham and Nick G 3 Link to comment Share on other sites More sharing options...
Popular Post JimFromHorsham Posted June 20, 2023 Popular Post Share Posted June 20, 2023 Daveoc33, TheFull9, Pinovic and 5 others 4 4 Link to comment Share on other sites More sharing options...
Popular Post MILITATED Posted June 20, 2023 Popular Post Share Posted June 20, 2023 (edited) Couple of SCAR GBBs Need the appropriate suppressor for the H SC, but it'll do for now Edit: Also tried a black Scar L Edited June 20, 2023 by MILITATED Nick G, JimFromHorsham, Wavey_Gravey and 2 others 3 2 Link to comment Share on other sites More sharing options...
BenJackson Posted June 20, 2023 Share Posted June 20, 2023 (edited) One from this weekend, first outdoor skirmish in almost a year!! Edited June 20, 2023 by BenJackson Pinovic, JimFromHorsham and Skullchewer 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now