Davegolf Posted February 5, 2023 Share Posted February 5, 2023 I think ‘contraption’ best sums that up! The workings are insane looking! Link to comment Share on other sites More sharing options...
DRaZZ Posted February 6, 2023 Share Posted February 6, 2023 Total noob, my first purchases. Colt m4 blue fox with Nuprol nx200 torch and Nuprol holographic sight. Handgun is the Vorsk defender pro GBB. I'm hoping these are OK for starter weapons! I know that as soon as I sighted in my m4 with the holo sight, it's very accurate, enough to seriously impress me. Nick G 1 Link to comment Share on other sites More sharing options...
Pupa2794 Posted February 6, 2023 Share Posted February 6, 2023 (edited) 16 hours ago, Davegolf said: I think ‘contraption’ best sums that up! The workings are insane looking! It's quite a good design for 1885. The idea was it was enclosed so nothing could foul up the mechanism, it was intended to stop both a charging soldier and protect from dangerous wild animals. They were all handmade and all seem a little different. Mine is based off a 455 calibre one as that one is closest to the 45 calibre Cassieopiea shells. The mechanism on the replica has been copied from the real one. There's a lot of finishing work left to be done with it. Edited February 6, 2023 by Pupa2794 Link to comment Share on other sites More sharing options...
RostokMcSpoons Posted February 6, 2023 Share Posted February 6, 2023 17 minutes ago, Pupa2794 said: TheFull9 1 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted February 6, 2023 Supporters Share Posted February 6, 2023 I got a lot of kills in BF1 with one of those. Link to comment Share on other sites More sharing options...
mightyjebus Posted February 9, 2023 Share Posted February 9, 2023 picked up 2nd hand in A1 condition Cybergun (ARES) SCAR SC RostokMcSpoons, Nick G, THE FNG and 1 other 1 3 Link to comment Share on other sites More sharing options...
RostokMcSpoons Posted February 9, 2023 Share Posted February 9, 2023 9 minutes ago, mightyjebus said: picked up 2nd hand in A1 condition Cybergun (ARES) SCAR SC That's a nice gun, I bought a couple of raffle tickets to win one at Airsoft Competitions, sad not to win it. Link to comment Share on other sites More sharing options...
Guest Posted February 9, 2023 Share Posted February 9, 2023 12 minutes ago, mightyjebus said: picked up 2nd hand in A1 condition Cybergun (ARES) SCAR SC The Romeo8T really suits that Link to comment Share on other sites More sharing options...
Krisz Posted February 9, 2023 Share Posted February 9, 2023 (edited) 2 hours ago, RostokMcSpoons said: That's a nice gun, I bought a couple of raffle tickets to win one at Airsoft Competitions, sad not to win it. Don't be too sad new mini scar in the works! You can find some videos on YT from this year's MOA (Taiwan). Fully licensed fn trademarks. Oem could be vfc I'm not sure. Edited February 9, 2023 by Krisz Link to comment Share on other sites More sharing options...
mightyjebus Posted February 9, 2023 Share Posted February 9, 2023 33 minutes ago, Krisz said: Don't be too sad new mini scar in the works! You can find some videos on YT from this year's MOA (Taiwan). Fully licensed fn trademarks. Oem could be vfc I'm not sure. Cybergun are releasing another 3 SCAR SC's in Grey, Tan and Black but the OEM will be BOLT instead of ARES. Lozart 1 Link to comment Share on other sites More sharing options...
Moderators Jez_Armstrong Posted February 12, 2023 Moderators Share Posted February 12, 2023 3D printed "FANTA" cover for the surefire can, I only had red filament left so the paint has come out a bit lighter on top but I think that looks pretty good lokkers, GeorgePlaysAirsoft, Nick G and 1 other 3 1 Link to comment Share on other sites More sharing options...
mightyjebus Posted February 12, 2023 Share Posted February 12, 2023 7 hours ago, Jez_Armstrong said: 3D printed "FANTA" cover for the surefire can, I only had red filament left so the paint has come out a bit lighter on top but I think that looks pretty good Nice. If you want to print another with the correct name, let me know and I'll send the file across (yeah I made the Fanta one) Jez_Armstrong 1 Link to comment Share on other sites More sharing options...
Moderators Jez_Armstrong Posted February 12, 2023 Moderators Share Posted February 12, 2023 2 hours ago, mightyjebus said: Nice. If you want to print another with the correct name, let me know and I'll send the file across (yeah I made the Fanta one) Yes please! As a few of the lads would like one, much thanks for doing the original Link to comment Share on other sites More sharing options...
mightyjebus Posted February 12, 2023 Share Posted February 12, 2023 24 minutes ago, Jez_Armstrong said: Yes please! As a few of the lads would like one, much thanks for doing the original no worries, give me a day or 2 to find it and modify it again. it's on one of these external HDD's somewhere! Jez_Armstrong 1 Link to comment Share on other sites More sharing options...
alxndrhll Posted February 13, 2023 Share Posted February 13, 2023 I’m sure some bits will change around once it’s getting used in anger but the arrival of the can and sling sees this one just about there. C-Diddy, Enid_Puceflange, GeorgePlaysAirsoft and 1 other 3 1 Link to comment Share on other sites More sharing options...
mightyjebus Posted February 13, 2023 Share Posted February 13, 2023 19 hours ago, Jez_Armstrong said: Yes please! As a few of the lads would like one, much thanks for doing the original manta complete meshed.stl Here's the STL file. let me know if you have problems printing. Jez_Armstrong 1 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted February 13, 2023 Share Posted February 13, 2023 3 hours ago, alxndrhll said: I’m sure some bits will change around once it’s getting used in anger but the arrival of the can and sling sees this one just about there. That’s giving me a MAHOOSIVE inferiority complex 😂 Link to comment Share on other sites More sharing options...
mightyjebus Posted February 13, 2023 Share Posted February 13, 2023 did a test print of the Manta and it fits the Angrygun can no problem. Black is the Manta and coloured is a painted fanta I did ages ago. Darkmikey22, Jez_Armstrong and Nick G 2 1 Link to comment Share on other sites More sharing options...
MrTea Posted February 14, 2023 Share Posted February 14, 2023 (edited) Finally, pictures of my 'finished' G&G MP5A4 EBB. In the second pic you can see the rear drum sight is chipped, still looking for a replacement. Upgrades/changes as follows; Rocket Airsoft high torque motor Rocket Airsoft 12:1 high speed gears ZCI 240mm inner barrel Maple Leaf Macaron Bucking Maple Leaf Omega Nub Gate Pico SSR3 MOSFET (just to let the gun run 11.1v LiPo) CYMA MP5 Low profile mount Nuprol M110 Spring Rocket Airsoft Rotary Bearing spring guide New Guarder tappet plate Rocket Airsoft Piston Full metal piston rack CYMA metal RIS handguard Standard Tamiya connections rewired to Deans Genuine HK 3-point sling (I believe) ASG B&T Tracer unit. Changed the outer sleeve with a knock off one which fits perfectly and removes the ugly trademarks. Olight Odin with tapeswitch. Gun no longer 'twangs' when fired and has a high RPS but I haven't got a chrono to tell properly. 11.1v 30c batteries get toasty after a lot of semi fire. FPS is a steady ~339. Hopefully going to take it to a CQC field later this week and put it through its paces. Edited February 14, 2023 by MrTea Skara, Nick G and JustMark 3 Link to comment Share on other sites More sharing options...
Popular Post JimFromHorsham Posted February 14, 2023 Popular Post Share Posted February 14, 2023 Apache & NGRS Skara, TheFull9, lokkers and 2 others 4 1 Link to comment Share on other sites More sharing options...
OTH21 Posted February 18, 2023 Share Posted February 18, 2023 Recently upgraded LCT TKMS by Luke at Neg Airsoft. I've then replaced the original black lower handguard with LCT wood and replaced the black pistol grip with an LCT plum one. Kept the upper handguard, which took a bit of filing down to fit on top of the wood lower. Nick G and JustMark 2 Link to comment Share on other sites More sharing options...
Hellfish Posted February 20, 2023 Share Posted February 20, 2023 (edited) Currently faffing about trying to recreate My in game Modern Warfare AKS74u .... not 100%, but I'm pretty happy otherwise Edited February 20, 2023 by Hellfish JustMark, Philby21 and Nick G 2 1 Link to comment Share on other sites More sharing options...
Nick G Posted February 20, 2023 Share Posted February 20, 2023 New project, been gifted a broken WE GBBR Thompson. Upper reciever is cracked so I've ordered a new one, now do I get some decent wood (fnar fnar) and rebuild it as a Thompson ........ Or do I use this, Snow wolf M41 A body kit ? GBBR Pulse rifle anyone ? JimFromHorsham 1 Link to comment Share on other sites More sharing options...
Supporters Lozart Posted February 20, 2023 Supporters Share Posted February 20, 2023 23 minutes ago, Nick G said: New project, been gifted a broken WE GBBR Thompson. Upper reciever is cracked so I've ordered a new one, now do I get some decent wood (fnar fnar) and rebuild it as a Thompson ........ Or do I use this, Snow wolf M41 A body kit ? GBBR Pulse rifle anyone ? Pulse rifle or GTFO. Nick G 1 Link to comment Share on other sites More sharing options...
Nick G Posted February 20, 2023 Share Posted February 20, 2023 7 minutes ago, Lozart said: Pulse rifle or GTFO. So, Pulse rifle then ? 🤣 Lozart 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now