Cromulon1994 Posted October 29, 2019 Share Posted October 29, 2019 32 minutes ago, EDcase said: You sure it wasn't "Spaceballs"? 🤣 Cool either way 😉 There is that too. I think I need a big white helmet for a skirmish. EDcase and Raytd 2 Link to comment Share on other sites More sharing options...
Sawyer Posted October 29, 2019 Share Posted October 29, 2019 On 04/10/2019 at 16:37, Sawyer said: The 416 needs an LPVO and the CQBRs deserve some sort of proper red dot. The evolution from the last pic. LVPO still hasn't arrived from China, but the MK18 Mod 1 now sports a Vortex Crossfire, with KAC style flip up front and rear sights, the Mod 0ish has the carry handle and the 416 has an EoTech EXPS3, as well as an element PEQ15. Dremeled down the finger groove on the Mod 1 too, and abused it with sugru. SOPMOD stock added and the VLTOR style stock gifted to the 416 to help with the two tone look. Beardedviking94, DarkAssassin and Raytd 2 1 Link to comment Share on other sites More sharing options...
Stratton Oakmont Posted October 30, 2019 Share Posted October 30, 2019 On 23 October 2019 at 17:10, osteoshot said: New specna arms SPECNA ARMS SA-A27-M CARBINE / BLACK It's official I'm a fully paid up specna arms fanboy load it with a 7.4 lipo 330 fps set hop for .28 loaded it up and watched them fly out accurately to a distance that scared my sorted Tokyo Marui No play in any parts, m-lok that works and solidly built with a full metal body i simply cannot fault this Aeg at the price point, if the gear box and hop alignment is good for the inferno gen 2 HPA engine that is going in it I will be a very happy bunny. Update, the gen 2 fitted with only minor adjustments to the trigger and Spring guide alignment was perfect. very happy at this price and rock solid Skara and Sawyer 2 Link to comment Share on other sites More sharing options...
Popular Post Hellfish Posted October 30, 2019 Popular Post Share Posted October 30, 2019 And she's done (externally).. Want a mosfet adding at some point Nick G, Andyglaister, Philby21 and 4 others 1 6 Link to comment Share on other sites More sharing options...
AmberYooToob Posted November 2, 2019 Share Posted November 2, 2019 My M4A5, Specna Arms SA-S03 Raytd and Diemaco 2 Link to comment Share on other sites More sharing options...
E21A Posted November 2, 2019 Share Posted November 2, 2019 Can’t decide which slide setup I like more 🤔 Raytd 1 Link to comment Share on other sites More sharing options...
BigAl Posted November 2, 2019 Share Posted November 2, 2019 Top the black hides the dodgy trades and is more authentic. People don't tend to sandpaper real Glocks. Raytd 1 Link to comment Share on other sites More sharing options...
emilianoksa Posted November 2, 2019 Share Posted November 2, 2019 Aren't the real ones available with stainless steel slides? Link to comment Share on other sites More sharing options...
Raytd Posted November 2, 2019 Share Posted November 2, 2019 5 minutes ago, emilianoksa said: Aren't the real ones available with stainless steel slides? 17 minutes ago, BigAl said: Top the black hides the dodgy trades and is more authentic. People don't tend to sandpaper real Glocks. My cousins who live in Texas have 3 glocks and one is steel slide Link to comment Share on other sites More sharing options...
BigAl Posted November 2, 2019 Share Posted November 2, 2019 I think you'll find there all steel slide, if you mean a real one. Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted November 2, 2019 Supporters Share Posted November 2, 2019 They do offer a grey/silver finish on the slides on some guns. But it is a Glock and in the US at least there is literally no limit to the colour/paint/modding/aftermarket parts you can get for Glocks. E21A 1 Link to comment Share on other sites More sharing options...
Raytd Posted November 2, 2019 Share Posted November 2, 2019 39 minutes ago, BigAl said: I think you'll find there all steel slide, if you mean a real one. 22 minutes ago, TheFull9 said: They do offer a grey/silver finish on the slides on some guns. But it is a Glock and in the US at least there is literally no limit to the colour/paint/modding/aftermarket parts you can get for Glocks. My apologies I didn’t use my words correctly he purchased one and the *steel slide* was uncoated Link to comment Share on other sites More sharing options...
E21A Posted November 2, 2019 Share Posted November 2, 2019 1 hour ago, BigAl said: Top the black hides the dodgy trades and is more authentic. People don't tend to sandpaper real Glocks. True, but these are airsoft toys, not real guns 😂 Also the black slide has proper trademarks 😉 Link to comment Share on other sites More sharing options...
BigAl Posted November 2, 2019 Share Posted November 2, 2019 Didn't see trades, see black finish disguises them. As for raw finish yes but they then coat them unless you mean stainless steel. Either way they don't have paint in the cocking serrations where the sandpaper guy could't quite get in there. Also if you leave it raw, especially an airsoft toffee one it will tarnish in no time. Short answer, stick with top slide. Link to comment Share on other sites More sharing options...
heroshark Posted November 3, 2019 Share Posted November 3, 2019 I'm not taken by either particularly. One of these days I will pick up a glock with a plastic slide and barrel. I'll stipple the whole thing from the barrel to the mag base. Just for shits and giggles. Cromulon1994 and TheFull9 2 Link to comment Share on other sites More sharing options...
E21A Posted November 3, 2019 Share Posted November 3, 2019 21 hours ago, BigAl said: Didn't see trades, see black finish disguises them. As for raw finish yes but they then coat them unless you mean stainless steel. Either way they don't have paint in the cocking serrations where the sandpaper guy could't quite get in there. Also if you leave it raw, especially an airsoft toffee one it will tarnish in no time. Short answer, stick with top slide. Polished slide is coated to protect from the elements. Paint was left in the serrations on purpose as well, I like the look. Link to comment Share on other sites More sharing options...
BigAl Posted November 3, 2019 Share Posted November 3, 2019 Each to there own but to me it just screams airsoft. Link to comment Share on other sites More sharing options...
Beardedviking94 Posted November 3, 2019 Share Posted November 3, 2019 This is my first gun I've just bought off a friend Tokyo marui hk416 delta 8 mags 2 stocks 2 batterys Suppressor And a few extras GeorgePlaysAirsoft, Seagal99, Nick G and 1 other 4 Link to comment Share on other sites More sharing options...
E21A Posted November 3, 2019 Share Posted November 3, 2019 51 minutes ago, BigAl said: Each to there own but to me it just screams airsoft. 🤔🤔🤔 erm.. it is airsoft 🤷🏻♂️ Link to comment Share on other sites More sharing options...
BigAl Posted November 3, 2019 Share Posted November 3, 2019 39 minutes ago, Beardedviking94 said: This is my first gun I've just bought off a friend Tokyo marui hk416 delta 8 mags 2 stocks 2 batterys Suppressor And a few extras Wow straight in with a cool high end gun. Enjoy. GeorgePlaysAirsoft 1 Link to comment Share on other sites More sharing options...
Beardedviking94 Posted November 3, 2019 Share Posted November 3, 2019 Thanks mate already got in with the local team and was lucky enough to get my ukara membership and the ladd was selling this. Got a really good deal @BigAl BigAl 1 Link to comment Share on other sites More sharing options...
XanderShadow Posted November 4, 2019 Share Posted November 4, 2019 Shiny new muzzle break fitted, and finally got the choom tube. Sadly though it can't take my TAG launcher :< so gonna have to buy some moscarts Sawyer 1 Link to comment Share on other sites More sharing options...
PopRocket123 Posted November 4, 2019 Share Posted November 4, 2019 Finally got my new M-LOK rail for my SR-16. So much lighter and more pointable. Now need a new torch mount and QD sling mount to clean the sides up. Before and after. Link to comment Share on other sites More sharing options...
DarkAssassin Posted November 5, 2019 Share Posted November 5, 2019 Recieved my 3rd Daytona gun, this one is an AK I brought from forum user @proffrink So far I had the M4 put together by Blackblitz airsoft in Canada, I put together the Scar and Proffrink built the AK for me. LCT AK Need a new red dot for it of some kind, any suggestions??? G&P m4 WE Scar H Here's a video of the AK, has some lovely recoil. 20191031_131538.mp4 Sawyer and GeorgePlaysAirsoft 2 Link to comment Share on other sites More sharing options...
Sawyer Posted November 5, 2019 Share Posted November 5, 2019 9 hours ago, DarkAssassin said: Recieved my 3rd Daytona gun, this one is an AK I brought from forum user @proffrink So far I had the M4 put together by Blackblitz airsoft in Canada, I put together the Scar and Proffrink built the AK for me. LCT AK Need a new red dot for it of some kind, any suggestions??? G&P m4 WE Scar H Here's a video of the AK, has some lovely recoil. 20191031_131538.mp4 11.28 MB · 0 downloads I really fancy a daytona gun, needs to be one with bolt stop though for me. Vortex Crossfire red dots are excellent for the price. DarkAssassin 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now