Adolf Hamster

So your the bastard who stole all the .48s... get him lads!

Joking aside, you can probably sell them straight on for more if your that way inclined.

Screw selling then on, these are my "so it's come to this" stash.

Also come at me, i got 5000 .48's and a polarstar

Always wear eyepro

yeah but not indoors, when i'm not airsofting.....

Which IR torch did you get? Struggling to find a decent one for range... I bought a cheap one that doesn’t do naff all.

uniquefire something or other, was cheap but i haven't had the chance to properly try it out yet.

Lucky for some! My fuse blew first game with it! 

it just goes full auto the moment you connect the battery, think the etu's fried.

however it did get some glorious kills before that happened.

As I could only see the "oh god oh god oh god" I thought you may have sharted

i haven't, but i suspect any poor bugger on the recieving end of this gun might.....

Ouch !

what motor you running on 11.1v with etu

sure it was something a bit too quick for 11.1v

maybe zci 22 tpa...

https://www.ak2m4.co.uk/internal-parts/motors-parts/zci-motor-high-torque-long

Carbon tubes on m4s always look so good. Where'd you get it from?

Old test peice out of work, happened to be the right size to bolt onto a barrel nut.

Bit incongruous as it blocks putting the gas tube in, but seems nice and solid, will be interesting to see how durable it is

I am afraid to say that there no mainstream airsoft manufacturers who currently make wood grips for the WE Makarov the close you could get is the brown Fakelite  these ones here   https://www.ebay.co.uk/itm/WE-Brown-Grip-For-WE-Makarov-GBB-Series-WE0557-/281684074973 

You could try to find surplus wood grips for the Makarov but I do not think there were many (if at all) that actually, real steel pistols manufactured that would have had the wood grips.

The American gun/surplus stores might have some but most properly will not ship to the UK.

hmm, food for thought. i have some contacts who might be able to source real steel ones which will possibly need modded to fit.

will have to see. kick off it's lovely though

Better off with a Land Rover than a MG (especially the chinaman built ones)

oh no that's the next project, get a turret ring mount and an old landy

They recently renamed the Makarov in DayZ, I was devastated!

Indeed, its a very under appreciated gun imo, sure the real one is underpowered but it's a masterclass in engineering simplicity.

The we version is a cracking wee gun, great gas effeciency, kicks like a mule and apart from the lack of nub its got to be the best hop unit design i've seen in a pistol.

Now i just need to get it a holster and some spare mags....

Lol, probably a sensible decision, that motor doesnt look like she'd handle it all that well, and last time(s) i tried it fried the motor

Tbh i'm thinking just leaving the auto cutoff to do its thing might be the best move, would save a wire coming from the gun.

Pity they aren't very good

havent heard much about them, tbh i figured it'd just be the WE base gun converted pretty much how the real svu was converted.

i mean i can't afford it anyway but a man can dream......

What ya build ? an address book ?😳

Indeedy, was exhausting running around to all my mates houses and adding their addresses.

I would imagine version 6 gearboxes are shimmed like tight version 3's. Where you shim the box like normal making a note of the shim count either side of every gear. Then just take the tappet and sector with the other side of the gearbox and work out how many shims need to move to that side for the tappet to run free. Then make that adjustment to the other gears and check it's all running nice. It does mean you get some funky pinion engagement at times but it's normally decent enough that it's not going to cause problems.

 

Its not the gears are my problem, its the tappet itself, the original tappet broke and the guarder tappet thats in there now is a smidge on the tight side at the front of the box between the nozzle and the case.

https://tienda.airsoftgandia.com/es/gyg-hop-up-airsoft/24043-gg-hop-up-chamber-for-g2010-plastic-g-20-011.html

https://www.tacticalcenter.es/GG-Hop-Up-Chamber-for-G2010-Plastic-G-20-011

https://www.tangotactical.it/it/gruppi-hop-up/2642-gg-hop-up-per-serie-fn2000-g2010-in-abs.html

http://www.diritosoftair.it/prodotto/gg-hop-up-chamber-fn2000-plastic/

Right after i ordered from evike as well.

Debating if its worth just buying up a bunch and treating them as wear parts at this rate.....

Ahh tolerances indeed, bane of my life, I get asked on a daily basis "does this, fit with this", one thing I wanted to do was setup a airsoft wiki for compatibility but never enough time in the day

A compatibility wiki would be nice but i suspect an impossible task.

Currently its the sear is very wobbly on its pin, like 0.5mm oversize.

And it aint worn out this gun hasnt fired more than 100 rounds

"listen mate, we're all fucked... just smile and laugh with us and you'll be fine"

yeah pretty much how i approached it, he seemed to enjoy himself which given the amount of drama normally goes on at that site is a good sign.

Yup looks like that meatloaf reached and passed its best before date ? RIP big man .

Another great lost...not sure if what's being said in the press he was anti-vax is true...bit of a shit way to be proved wrong.  RIP

Had a group of chav kiddy rentals that never took their hits 😕

We had a few rentals with accompanying shenanigans, but mostly they were all right.

Did you run out of cable ties and keyrings?

Never run out of cable ties and keyrings.

it's more that carbon is not a good material for bolting things onto, i'm kinda worried the wrong shock load is going to just rip the bolts out.

problem is there's nowhere else decent to mount the front of a 2 point on an m4.

How in the fuck did you manage that?

dropped it sideways onto the mag, thought the mag was the only bit got bent, but looks like the reciever is aluminium and easy bent.

fortunately there's plenty of room inside so i think i'm going to get some steel bar and bolt it on the sides to reinforce it.

Get into sorcery instead...

Its easier 😆 

starting to think that.

trying to set the npas on this dragonuv and it's not fun, might be easy stripped but you gotta to that every goddamn time to adjust it....

Can you show us on the fps/Joules chart where the bad vendor touched you?

They were meant to be m100's so give or take a bit 1j, they were closer to m130/m140's.

Shame as the whole point of buying them was to have some springs i knew were in the right ballpark rather than my current batch which are all in the 0.5j range.

All i can say is i'm glad i chrono'd it before giving it back to me mate, not sure he'd be best pleased at being told he cant play.

I'm feeling it too...  and I don't even have any of my guns with me to work on or tinker with. Apparently the new Thor movie 'Extraction' on Netflix is quite good, might give that a watch.

We (Italy) may play again, or rather practice team sports (airsoft falls under this category here), from the 18th of May.

What is the other 36%??😲

sling wouldn't take the dye