Leaderboard

I have had a good day.

it has but I've hung up my guns now I reckon (long story - even by my war & peace standards) just before stuff hit the fan I got hold of these motors..... https://www.aliexpress.com/item/PermTerminator-Ultra-Custom-M160-High-Twist-Type-High-Speed-Motor-High-Torque-AEG-Motor-Short-Axis/2042149112.html?spm=2114.search0104.3.16.46e8542f3EI3Q9&ws_ab_test=searchweb0_0,searchweb201602_3_10065_10068_10130_10547_319_317_10548_10696_10192_10190_453_10084_454_10083_10618_10307_10820_10301_10821_10303_537_536_10902_10059_10884_10887_321_322_10103,searchweb201603_51,ppcSwitch_0&algo_expid=b8d37fa9-7fde-446f-88e1-aee119a81029-2&algo_pvid=b8d37fa9-7fde-446f-88e1-aee119a81029&transAbTest=ae803_3 & https://www.dx.com/p/gear-motor-for-m180-m4-m16-mp5-g3-m14-power-upgraded-airsoft-aeg-2001815#.XHx0WcD7TIU the blue looked nice with vents at about 28k & red one at about 22k both are neodym with alloy ends that seemed to mesh nicely with SHS bevels but everything got packed away so never got round to putting them through their paces they looked pretty decent and not too crazy or expensive both with D pinions so easier to change than ASG O pinions I only really popped in coz such a slow day today and wondered how you guys were doing then f*ck me necro post nearly four years of the HC05 - but thought I'd best point out the BD M160 is too quick/hot yeah chaps - you don't want them crazy mofo motors - way too hot & OTT if you know how to build a good box well I just popped back as it was so quiet today etc.... Duck Jnr is half way through his first year at Uni - 19 years old - jeeeeeeez seem like only last month we racked up at TWA urban site (soon closed) at Crystal Palace/Anerley Hill Glad to see you guys & this place still around

After seeing the pic of @Lozart very sweet looking Steve McGarrett M4 build decided I wanted one as well ! Only real difference is I’ve used a TM 416D recoil as the base gun instead of the M4 used in the show .

Finally fitted this tonight - massive thanks to @rocketdogbert for lending me an Armourers wrench in order to fit it properly! 😘 I like it! Overall it makes the gun look nice and chunky in comparison to the Keymod. And now it looks just a little bit more generic than it did before! Feels weird, my brain keeps thinking it's made the gun longer... 😂

@Shizbazki Success! I've owned 3 GHK m4's (One of which i built from a forged receiver) and while they're nice, they just don't perform like the MWS does. If you're only gonna be using .28's or less, there's no real need to touch it internally. The nub makes a massive difference when using heavier BB's, which the standard one can't lift. I run my CASV mws (310fps) on .32-36 and my mk12 mws (400fps) on .36-.45's

I think there are special clubs for people with weird tastes like you....

I might be being dim here - but why useful? Is it so that the mag's not damaged when you drop it? Or is it so that you can do this:

Normally they have my crye Airflex knee pads in but my sister couldn’t find hers so I lent her mine!😂

Tokyo Marui G36K low/mid-cap recommendations - I'm looking for recommendations for compatible low cap's (will consider mid) for the TM G36K. In particular I was looking at the 45 round Ares lo-cap's, can anyone confirm if these are fully compatible? @Game Cam - This may be outside of your budget but the warranty offered for the sight is second to none and it is rated for real firearms (to the best of my knowledge). Also if retaining zero is a point of consideration then you won't go wrong with the Vortex - Crossfire Red Dot.

The only correction to all that crap is try NOT to buy a Big Dragon M160 motor Yes it is fast as f*ck but draws way too much - it is a cheap fast high speed motor I'd say a smidge quicker than SHS High Speed - again try to avoid High Speed Motors (they drain you battery very quickly and generate more heat) The Big Dragon I originally thought was the dogz nutz but eventually too much heat long term will lead to bearings in motor armature itself crapping out (trust me) A "balanced" 27~30k motor like along the lines of SHS HT - but I've been away a while so unsure on any new stuff but around that spec Still think DSG's are over-rated, most long term box fiddlers might agree with this but new comers are often blinded by high ROF is everything and must get/build one - naaaahhhhhh 13:1 gears, Short Stroke if you wish & balanced motor will get you into the twenties which is plenty on 7.4v 25c (unless you are over compensating for crap shooting ability like I was/am) Just a quick note in case people thinking of buying the awesome BD M160 - maybe not it will crap out due to ultra high speed and heat generated and you will need extra batteries (trust me) A more sensible motor will run cooler, draw less amps and last longer (if done properly) and when paired with a 13:1 gear set will produce same results as dumping a HS motor in reg box but Amps/Watts will be much lower and battery/box will last longer than a reg box with M160 motor Another thing is that ORIGINALLY G&G DID make a DSG with cut off lever cams though this was a limited production run way before HC05 was made maybe they had to pull it for copyright issues with Seigetek so pulled the 3mm axle with cams then made a 5mm axle no semi cam DSG - yeah WTF ??? see here on an old Amazon Japan site pic shows the 3mm axle and cut off cams.... This was probably the gear set option showcased by G&G at the 2015 Shot Show with 3mm axle & COL cams Alas the HC05 went into production with crappy 5mm axle & no semi DSG gear - absolutely stupid idea So yeah - avoid the G&G HC05 & perhaps a QUICK UPDATE - lol on the M160 motor is way too quick (just in case you think of getting one of those bad bot motors as they really are quick - ergh too quick & warm running) Just a quick update, mainly in case people are thinking of buying the M160 motor - old review of mine and my choice today would be a 30k not 45k motor (ultra high speed & heat is not the be all & end all I have learnt the hard way) Edit - pasted the SHS DSG on Amazon instead of the old G&G one - doooh my bad removed the SHS link & updated.... G&G did originally make a 3mm axle DSG gear with COL cams (probably showcased in 2015 but likely pulled due to copyright issues) So they made the poxy 5mm axle no semi gear instead - stupid doesn't even cover it see here G&G's Riot rip-off clone DSG with 3mm axles & COL cams no longer made if only they had put this in or come to an agreement with Riot/SHS or something the HC05 would have had semi https://www.amazon.co.jp/ARMAMENT-G-10-102-Double-Sector-Gear/dp/B007JQGHPK

I forgot to post this here. My new AKM.

For the motherland

Very nice setup! And your English is better than most English people here 😂. You should like the nub. If you only change a single thing on the gun, I’d argue the nub is the best £:performance upgrade (assuming you utilise heavy ammo)

A Nuprol (Hissss) Bocca Series One rail (10") from SWAS: https://www.swasairsoft.co.uk/clearance-sale/nuprol-bocca-series-one-rail-10-black Wanted something to replace the 8" keymod on my Specna B12 as I'm bored of Keymod accessories not fitting or having to use rail segments for RIS accessories. Been looking at second hand for a while but at £25(!) How could I resist!

Well I only got off about 100 shots before the gears broke but here's the latest addition to my collection: LCT AKM

Just after Christmas I picked up a VFC H&K 416 A5 It's a gun I have always wanted especially in the RAL8000 paint scheme! I ordered it online from Fubar Bundy, it was a little more expensive than other retailers but it was the only placed that had one in stock. However I had a nice surprise as not long after I placed the order Steve phoned me up to explain that I had over paid as the price had been increased on the website (to cover costs) so a customer could buy it on finance, which they never did. He apologised, and promptly returned me the difference! Excellent customer service! 👍 Anyway... I took it along to it's first game, and my first one of the year. I'll be honest I was really disappointed! Don't get me wrong this is a lovely gun to look at, and the build quality is superb/solid but the only thing that really matters is the shooting performance, which left a little to be desired. Maybe I've been spoilt with my mildly upgraded Krytac LVOA-S which even before it's upgrades shot much better out the box. So although I found a gun that looked awesome, it didn't shoot awesome so I decided to go all out! I dropped it off at Dave's Custom Airsoft for a few tweaks... * Gate TITAN Complete Set V.2 Advanced * Tokyo Marui Samarium Cobalt Super High Torque Motor * ProWin CNC HopUp chamber * Prometheus Air Seal Chamber (purple) * Prometheus Hop Up Tensioner (Flat Type) * SHS M100 Tune Up Spring * SHS High Speed Gear Set (13:1) * SHS 14 Full Steel Teeth Piston With Aluminium Piston Head * 6.03mm, Stainless Steel Tight-Bore barrel Got it back yesterday, and it's a bloody monster! Cannot wait to get it out for some 'pew pew' Sorry for the long post but I just wanted to give a little review along with the purchase. I will do an update after it's first skirmish! Here's a couple of photos, and one with my trusty LVOA-S which sadly will be going up for sale shortly as I don't need two very similar AR platforms. Thanks for reading chaps.

Secutor Rudis Magna. Honestly, out of the box, better than my extensively modified we g18c, except for fps consistentcy and gas efficiency. Although, that will be remedied by some upgrades I will do to it. Oh, the rmr is trash btw. I expected it to be but I wamted the slide cut out to fit a better one.

Tanaka Colt SAA Bisley Model. Man, this is honestly a fantastic looking and feeling replica.

Because everyone needs a bullpup.

SNIPAH!!! (Days off work are expensive, only went in for a battery)