JustMark Posted January 28, 2023 Share Posted January 28, 2023 Picked up a smaller chest rig earlier and I think I'm pretty happy with it, I found my plate carrier obstructed my shouldering the weapon so this is ideal. Going for a sort of not jeans and plaid shirt PMC look, next step grow a big beard right? Nick G, Jumbles and Shamal 3 Link to comment Share on other sites More sharing options...
MrTea Posted January 29, 2023 Share Posted January 29, 2023 On 27/01/2023 at 18:54, TipsyDiver said: Comms headset: earmor That's a great looking kit. I was wondering about your headset as i've also been looking for one that attaches to the rear mounts of my helmet and you happen to have exactly what I want. Personally, I don't need it for comms, more for aesthetics and the active hearing protection. Where'd you get it from? What's the sound quality like? Link to comment Share on other sites More sharing options...
Supporters SeniorSpaz87 Posted January 29, 2023 Supporters Share Posted January 29, 2023 4 hours ago, MrTea said: That's a great looking kit. I was wondering about your headset as i've also been looking for one that attaches to the rear mounts of my helmet and you happen to have exactly what I want. Personally, I don't need it for comms, more for aesthetics and the active hearing protection. Where'd you get it from? What's the sound quality like? Those are OpsCore AMP Arms, or a clone of them. They're a fantastic bit of kit and IMO both hold earpro a bit more evenly on the head and are easier to swivel off the head than the two-prong wire ones that attach to the top rail. Plus they allow you to use your upper rails for whatever. Pinovic, Lozart and MikeMarden 3 Link to comment Share on other sites More sharing options...
MrTea Posted January 29, 2023 Share Posted January 29, 2023 (edited) 4 hours ago, SeniorSpaz87 said: Those are OpsCore AMP Arms, or a clone of them. They're a fantastic bit of kit and IMO both hold earpro a bit more evenly on the head and are easier to swivel off the head than the two-prong wire ones that attach to the top rail. Plus they allow you to use your upper rails for whatever. Gotcha. I'll wait for @TipsyDiver to reply as I want to know their exact headset setup so I can get a gauge on quality. It looks like a set of Earmor M32 but i'm not totally sure. Edited January 29, 2023 by MrTea Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted January 29, 2023 Supporters Share Posted January 29, 2023 My old RG PC, just been replaced. Real mix of custom parts and commercial, worked great though, gonna miss it when it goes. DaktariT, JustMark and Nick G 3 Link to comment Share on other sites More sharing options...
Popular Post Jumbles Posted February 1, 2023 Popular Post Share Posted February 1, 2023 Hiya:) Thought I’d share a shot of my budget winter kit from the weekend. Photographer Nick G, JustMark, The Waco Kid and 6 others 9 Link to comment Share on other sites More sharing options...
Shamal Posted February 1, 2023 Share Posted February 1, 2023 20 minutes ago, Jumbles said: Hiya:) Thought I’d share a shot of my budget winter kit from the weekend. Photographer Nice. Looks functional and warm. Link to comment Share on other sites More sharing options...
Jumbles Posted February 2, 2023 Share Posted February 2, 2023 10 hours ago, Shamal said: Nice. Looks functional and warm. Thanks, it was very! Had to swap out undergarments at lunch despite the low temps. Gorka must be the least breathable suit out there! Shamal 1 Link to comment Share on other sites More sharing options...
Moderators Jez_Armstrong Posted February 5, 2023 Moderators Share Posted February 5, 2023 Finally got the team together for a photo Diemaco, Galvatron and TipsyDiver 1 2 Link to comment Share on other sites More sharing options...
TipsyDiver Posted February 11, 2023 Share Posted February 11, 2023 (edited) It's earmor mount and earmor headset. I got it all from Poland. From Specshop.pl Sorry I am not very proficient with forums, no idea how to quote what I am responding to 😕 Edited February 11, 2023 by TipsyDiver Link to comment Share on other sites More sharing options...
Supporters SeniorSpaz87 Posted February 11, 2023 Supporters Share Posted February 11, 2023 4 hours ago, TipsyDiver said: It's earmor mount and earmor headset. I got it all from Poland. From Specshop.pl Sorry I am not very proficient with forums, no idea how to quote what I am responding to 😕 You can do so by hitting the little "quote" button under a post. Or, for a multiquote hit the little "+" sign next to the "quote" button. TipsyDiver 1 Link to comment Share on other sites More sharing options...
Galvatron Posted February 12, 2023 Share Posted February 12, 2023 I took delivery of a Lanbaosi tactical long sleeve shirtas a base layer and got a Union Jack patch for the right upper arm pocket. I added a OneTigris FYR Tactical Vest along with a Viper double magazine pouch plus a Viper double pistol magazine pouch. I fed through a single point rifle strap. Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted February 12, 2023 Supporters Share Posted February 12, 2023 If I may, couple of tips that take seconds but will make it sit/look way better. The main thing is, if you haven't already, clip your gun in and test that sling, like hover the muzzle just above the bed and give it a serious yank to check the security, seen more than a few gats suddenly drop when airsoft single point slings with a 1" buckle haven't been up to the task. If it fails or feels borderline you'll be better off just relying on the carrying method god/evolution gave you vs thinking the sling has got it when it doesn't. Some cheap foam cut to fit inside the plate bags will add basically no weight and won't hinder but again, the rig will probably 'sit' better and it'll certainly look a lot better; more like the look folks envision in their heads anyway I believe. Obviously you'll have adjusted the cummerbund for your waist, but most people generally leave the shoulder straps too long. It's only airsoft, as I've said before it's not the end of the world, but generally the top of the front plate want's to sit where your collar bones meet in the middle. Some things to consider anyway. Cocha 1 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted February 12, 2023 Share Posted February 12, 2023 1 minute ago, TheFull9 said: If I may, couple of tips that take seconds but will make it sit/look way better. The main thing is, if you haven't already, clip your gun in and test that sling, like hover the muzzle just above the bed and give it a serious yank to check the security, seen more than a few gats suddenly drop when airsoft single point slings with a 1" buckle haven't been up to the task. If it fails or feels borderline you'll be better off just relying on the carrying method god/evolution gave you vs thinking the sling has got it when it doesn't. Some cheap foam cut to fit inside the plate bags will add basically no weight and won't hinder but again, the rig will probably 'sit' better and it'll certainly look a lot better; more like the look folks envision in their heads anyway I believe. Obviously you'll have adjusted the cummerbund for your waist, but most people generally leave the shoulder straps too long. It's only airsoft, as I've said before it's not the end of the world, but generally the top of the front plate want's to sit where your collar bones meet in the middle. Some things to consider anyway. Agreed with the above, You may find the sling when loaded, pulls down and the rear of it will be on your neck, I’ve seen players use a Carabiner through the “drag handle” on the back and through the sling to stop that happening. I’m sure a couple of decent cable ties would do the same. I tried cutting up a Yoga mat for simulation plates, was ok , but again too flexible so I managed to “procure” a couple of swimming floats A little 1/4” trim to help shape and they make my PC look like it has proper plates in it 👌 TheFull9 and Cocha 2 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted February 13, 2023 Supporters Share Posted February 13, 2023 Setup my C2R Chameleon the other week, every pouch a different brand and all made years apart from the next one 👌 ha Wavey_Gravey and Skara 1 1 Link to comment Share on other sites More sharing options...
MrTea Posted February 14, 2023 Share Posted February 14, 2023 On 11/02/2023 at 11:02, TipsyDiver said: It's earmor mount and earmor headset. I got it all from Poland. From Specshop.pl Sorry I am not very proficient with forums, no idea how to quote what I am responding to 😕 Thanks for the info I was always checking back just in case you came back. Link to comment Share on other sites More sharing options...
ghostwalker Posted February 15, 2023 Share Posted February 15, 2023 A couple from Sunday at battlestations. Wearing my new aircrew mtp combats and ubacs JustMark and Nick G 2 Link to comment Share on other sites More sharing options...
MikeMarden Posted February 19, 2023 Share Posted February 19, 2023 On 29/01/2023 at 17:48, SeniorSpaz87 said: Those are OpsCore AMP Arms, or a clone of them. They're a fantastic bit of kit and IMO both hold earpro a bit more evenly on the head and are easier to swivel off the head than the two-prong wire ones that attach to the top rail. Plus they allow you to use your upper rails for whatever. Big advocate of these arms Vs. the metal pronged ones, no matter how much in bent the metal prongs they never sat right enough. Sourced mine via AliExpress for less than £30 Lozart 1 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted February 19, 2023 Supporters Share Posted February 19, 2023 My patches that aren't in patch books, as of last month. Just about to fill the 3 doors so figured it was time to take a picture. Link to comment Share on other sites More sharing options...
C-Diddy Posted February 19, 2023 Share Posted February 19, 2023 Couple from last weekend's run out for the lad's birthday. He's sporting his new MARPAT rig, and Specna Arms Edge (very impressed for a sub-£200 gun). I'm running a tigerstripe/MCB combo with the MWS. Pinovic 1 Link to comment Share on other sites More sharing options...
Hellfish Posted February 21, 2023 Share Posted February 21, 2023 My kit will be considered fairly generic but is comfortable and functional lokkers, Lozart and JustMark 3 Link to comment Share on other sites More sharing options...
Asomodai Posted February 21, 2023 Share Posted February 21, 2023 I am really not that chunky... It's just a loose fitting bit of Parachute DNC! Link to comment Share on other sites More sharing options...
1way00 Posted February 21, 2023 Share Posted February 21, 2023 My Loadout Direct action spitfire in pencott greenzone with 3x warrior assault systems mag pouches Helikon-tex pullover wind jacket and bottoms in pencott wildwood Helmet PTS MTEK Flux in OD Green w/ some helmet ghille / scrim from ebay Helikon-tex EDC Backpack in pencott wildwood Warrior Assault Systems PLB belt in olive drab w/ util pouch, mag dump pouch, m4 mag pouch, and a generic holster (plan to upgrade to a trex arms style glock holster) Specna Arms H-22 416 Umarex Glock 17 Gen 5 Baofeng AR-152 UHF/VHF Pinovic 1 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted February 21, 2023 Share Posted February 21, 2023 The Goonshow, featuring the 416 Diemaco 1 Link to comment Share on other sites More sharing options...
The Waco Kid Posted February 22, 2023 Share Posted February 22, 2023 On 01/02/2023 at 19:23, Jumbles said: Hiya:) Thought I’d share a shot of my budget winter kit from the weekend. Photographer The white vans in the background actually make it look more like an eastern bloc military image. 👍😁 Rogerborg, Pinovic and Jujujr 2 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now