Supporters Druid799 Posted June 14, 2019 Supporters Share Posted June 14, 2019 10 hours ago, paradoxum said: Finally found a mask I like; https://www.ebay.co.uk/itm/TIER-NONE-LT-R500-Plastic-Mask-OD-TNG019-OD/142931442251 Went with the green to go with my multicam gear. Pic of it with headset: I want to be able to change the lens colours, blue, red, yellow, etc, even if it's just a thin overlay over the main plastic - what material should I be looking at for that? Just buy a motorcycle helmet visor in the colour you want and cut it to shape . what I did with this helmet . ImTriggerHappy, Lozart, Resistor170 and 1 other 2 2 Link to comment Share on other sites More sharing options...
Supporters Lozart Posted June 14, 2019 Supporters Share Posted June 14, 2019 2 minutes ago, Druid799 said: Just buy a motorcycle helmet visor in the colour you want and cut it to shape . what I did with this helmet . Nice mythosaur there! Druid799 1 Link to comment Share on other sites More sharing options...
Musica Posted June 14, 2019 Share Posted June 14, 2019 Re-ordered a i5 mask as my first order wasn't in stock and ordered this one for £130! also ordered a x300 clone for my pistol as both items were from ebay and they have 10% of £50+ spend at the moment. https://www.ebay.co.uk/itm/401558273429?ul_noapp=true Link to comment Share on other sites More sharing options...
paradoxum Posted June 14, 2019 Share Posted June 14, 2019 3 hours ago, Druid799 said: Just buy a motorcycle helmet visor in the colour you want and cut it to shape . what I did with this helmet . Good idea, I've got bikes and have used bike helmets obviously but eg the one I have now, the lens on it is pretty thick, cut/file/sand down the edges and it should bend enough and fix in? Can you post a pic of the inside please? Also love the colours and kill counts. What about pinlock inserts? https://www.racevisors.co.uk/category/pinlock-inserts I've actually got a yellow one for my bike helmet and it has great anti-fogging on it. I'm going for a kinda republic commando look but not sure how a blue visor will look. https://www.thevisorshop.com/en/LS2-FF399-Visor/m-22725.aspx Looking at them and the mask it seems like the visor on the mask might be too tall - what are the dimensions of it fully before insertion into the mask, and what secures it in place? Could even put some LEDs on the inside: 1 hour ago, Musica said: Re-ordered a i5 mask as my first order wasn't in stock and ordered this one for £130! also ordered a x300 clone for my pistol as both items were from ebay and they have 10% of £50+ spend at the moment. https://www.ebay.co.uk/itm/401558273429?ul_noapp=true I sold a mint condition i5 on ebay for £120 the other day when I realised I couldn't use it with my helmet / headset, should have posted it on here. Druid799 1 Link to comment Share on other sites More sharing options...
Supporters Druid799 Posted June 14, 2019 Supporters Share Posted June 14, 2019 I always use shoei visors as they were the only ones I ever used on my bike . Once you cut it down it’s surprisingly flexible and will fit no problem . i just lay the original over the new one trace around the cut it out with my dremel . You can’t see much on the inside as the visor is bolted to the out side and then the rim is bolted on top of that . Link to comment Share on other sites More sharing options...
paradoxum Posted June 14, 2019 Share Posted June 14, 2019 1 hour ago, Druid799 said: I always use shoei visors as they were the only ones I ever used on my bike . Once you cut it down it’s surprisingly flexible and will fit no problem . i just lay the original over the new one trace around the cut it out with my dremel . You can’t see much on the inside as the visor is bolted to the out side and then the rim is bolted on top of that . Ah okay, what's the stock visor like, is it thick enough alone? do you double them up, or not enough room? https://www.sportsbikeshop.co.uk/motorcycle_parts/content_cat/793/(all;product_price;ASC;0-0;all)/page_0/max_20 Eesh they're expensive. They definitely fit when cut down? shame there aren't any pinlock visor screens rather than the main plastic visor. Link to comment Share on other sites More sharing options...
Supporters Druid799 Posted June 14, 2019 Supporters Share Posted June 14, 2019 Bloody hell thats a bit steep ! I never pay more that 20 for one ! To be honest bud I always change the visor on any HK mask , you just can’t guarantee the quality so I’d rather change it soon as I get it just to be on the safe side . But that’s not saying everything is poop I’ve got a couple of pairs of FMA fan goggles and I’m more than happy with them . Bit more trust in a recognised brand .👍 paradoxum 1 Link to comment Share on other sites More sharing options...
paradoxum Posted June 14, 2019 Share Posted June 14, 2019 21 minutes ago, Druid799 said: Bloody hell thats a bit steep ! I never pay more that 20 for one ! To be honest bud I always change the visor on any HK mask , you just can’t guarantee the quality so I’d rather change it soon as I get it just to be on the safe side . But that’s not saying everything is poop I’ve got a couple of pairs of FMA fan goggles and I’m more than happy with them . Bit more trust in a recognised brand .👍 What store do you use? Link to comment Share on other sites More sharing options...
Lasbrisas17 Posted June 14, 2019 Share Posted June 14, 2019 My new genuine peltor comtac XPI's with boom mic arrived! (was an absolute pig to install but I got it done) They are such good quality, way better sound than the shitty z tactical knock off's (save your money and get real instead) ProPain87, Enid_Puceflange and paradoxum 1 2 Link to comment Share on other sites More sharing options...
Stratton Oakmont Posted June 14, 2019 Share Posted June 14, 2019 Just swapped this for my ares honey badger the red paint will be removed to return it to its former stealthy black although it needs a bit of tlc, missing grub screws and some hop tweaks but will soon be a cqb monster If anyone has a spare LCT folding stock pin I would be interested Link to comment Share on other sites More sharing options...
ProPain87 Posted June 16, 2019 Share Posted June 16, 2019 Got spoilt for Father’s Day, buzzing with the mug, the goggles ain’t too shabby either 👍 BibbsOnTour, Druid799, djben9 and 1 other 4 Link to comment Share on other sites More sharing options...
Supporters Lozart Posted June 17, 2019 Supporters Share Posted June 17, 2019 On 14/06/2019 at 16:06, paradoxum said: Good idea, I've got bikes and have used bike helmets obviously but eg the one I have now, the lens on it is pretty thick, cut/file/sand down the edges and it should bend enough and fix in? Can you post a pic of the inside please? Also love the colours and kill counts. What about pinlock inserts? https://www.racevisors.co.uk/category/pinlock-inserts I've actually got a yellow one for my bike helmet and it has great anti-fogging on it. I'm going for a kinda republic commando look but not sure how a blue visor will look. https://www.thevisorshop.com/en/LS2-FF399-Visor/m-22725.aspx Looking at them and the mask it seems like the visor on the mask might be too tall - what are the dimensions of it fully before insertion into the mask, and what secures it in place? Could even put some LEDs on the inside: You need to check out Master Leman's Store on Etsy https://www.etsy.com/uk/shop/MasterLemansStore all his masks are made of Kydex... Link to comment Share on other sites More sharing options...
BibbsOnTour Posted June 17, 2019 Share Posted June 17, 2019 A few bits from the DAG charity raffle at the weekend 😜 Link to comment Share on other sites More sharing options...
paradoxum Posted June 17, 2019 Share Posted June 17, 2019 4 hours ago, Lozart said: You need to check out Master Leman's Store on Etsy https://www.etsy.com/uk/shop/MasterLemansStore all his masks are made of Kydex... I already bought it Link to comment Share on other sites More sharing options...
Supporters Lozart Posted June 17, 2019 Supporters Share Posted June 17, 2019 Just now, paradoxum said: I already bought it You ARE allowed to have more than one y'know... Link to comment Share on other sites More sharing options...
Moderators djben9 Posted June 17, 2019 Moderators Share Posted June 17, 2019 Some MBDU trousers....quite comfy Lozart 1 Link to comment Share on other sites More sharing options...
Supporters Lozart Posted June 17, 2019 Supporters Share Posted June 17, 2019 18 minutes ago, djben9 said: Some MBDU trousers....quite comfy They look good, shame they don't come in more colours (yet). djben9 1 Link to comment Share on other sites More sharing options...
Moderators djben9 Posted June 17, 2019 Moderators Share Posted June 17, 2019 Yeah thats my issue, khaki, and i'd get a few more. might get a black pair when another discount code comes out, i ended up getting the pencott wildwood these are cut different to the usual SFU/CPU, luckily Military 1st have the great refund / exchange policy so was able to try many versions on due to issue with waist vs legs!! Link to comment Share on other sites More sharing options...
Supporters Lozart Posted June 17, 2019 Supporters Share Posted June 17, 2019 2 minutes ago, djben9 said: Yeah thats my issue, khaki, and i'd get a few more. might get a black pair when another discount code comes out, i ended up getting the pencott wildwood these are cut different to the usual SFU/CPU, luckily Military 1st have the great refund / exchange policy so was able to try many versions on due to issue with waist vs legs!! Are they slimmer cut compared to the SFU? More like the UTP perhaps? Link to comment Share on other sites More sharing options...
Moderators djben9 Posted June 17, 2019 Moderators Share Posted June 17, 2019 yeah a bit slim.... classed as 'anatomical cut' im usually a L or XL, but find these in those sizes were tight on legs / upper thigh so had to go to XXL just so i could have that little bit of extra movement!.....annoyingly the velcro is almost at max so the belt is handy!......may need to get some stitched on the make the section longer still comfy and nice arrangement of pockets, another reason i had to change size.... Lozart 1 Link to comment Share on other sites More sharing options...
Popular Post E21A Posted June 17, 2019 Popular Post Share Posted June 17, 2019 😁😁😁 ImTriggerHappy, djben9, GothicGhost and 5 others 8 Link to comment Share on other sites More sharing options...
Tec-Spek Posted June 17, 2019 Share Posted June 17, 2019 Some stock WE M4 parts. Pic sent to me today from KYAIRSOFT (Awesome customer service!) EDcase 1 Link to comment Share on other sites More sharing options...
Drin9 Posted June 18, 2019 Share Posted June 18, 2019 17 hours ago, E21A said: 😁😁😁 Wow, this is quality. What brand?? Link to comment Share on other sites More sharing options...
E21A Posted June 18, 2019 Share Posted June 18, 2019 9 minutes ago, Drin9 said: Wow, this is quality. What brand?? KWC/Cybergun Link to comment Share on other sites More sharing options...
Stratton Oakmont Posted June 18, 2019 Share Posted June 18, 2019 So from this To this So so where to begin. It appears my idea of shoots perfectly is not necessarily the same as others. ive heard of tactical maracas but thought that applied to hicap magazines not the gun itself, when I stripped it down the lack of screws etc explained the noise I will just list what I had to do to get this back to what I wouid be happy with. remove all two tone paint trunion grub screws, yeah probably need those folding stock pin grub screw, yeah probably need one of those too. stripped hop unit screws, check AK lever shuffle check loose front grip reshimmed shooting straight, naah curving right after 20m new hop rubber and s-hop now dead straight zenitco pts-1 stock cheek piece bolt missing stock pin had been drilled out instead of driven so no longer exists so unable to replace with a standard one as top eyelet now had a 6mm diameter hole and bottom eyelet and stock had a 5mm hole 4mm diameter stock pin had been used so stock had a little🙄 Wobble to say the least stock 2mm too thin so had to make a spacer to go with a new custom fabricated stock pin to eliminate vertical play shimmed folding bracket now no unnecessary movement reduce from 410 to 320 fps, thankfully gearbox had been left untouched and LCT had built a good one repsray in Matt black to hide faint remnants of previous dayglo new shs motor because I had one knocking about new wiring harness with thicker silicon wire and xt60 connectors just needs a gate Titan to shorten the trigger remove contact trigger issues in the 7.4 lipo and its cqb ready good job I like AK variants!!!!!!!!!! Monty and Albiscuit 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now