BibbsOnTour

Sorry mate, already impulse bought something I don't need with the money 🤣Thanks though!

If I'd have seen this yesterday, it'd have taken all my willpower not to rip your arm off for it🤣😭

From what I recall I just took it down and reassembled a few times until it worked properly. Not exactly sure what I did to cause it to not work but assume something just wasn't sitting correctly as after the 2nd or 3rd attempt it worked as it should and I haven't had the issue since. Hope this helps a bit!

This looks like it has incredible range... it does not.

FRV Tailoring shooters belt (got the deployment pack so also got a 1-point sling and a couple 'med sleeves' which is what the smoke grenade is in in the below pic + a yoke for the belt) BlueForceGear Ten-Speed double 5.56 pouch Other bits on the belt for anyone that's interested, from left to right, are a HSGI pogey pouch, WAS universal pistol holster (housing my ASG CZ P09) and a carabiner Also found my old air rifle so I took the scope off and placed* it on my Avalon... FRV 1-point sling is just about in that picture too *Isn't for mounting to picatinny so it's just balanced in the right position to see what it looks like😂 (pretty cool imo)

pre-teen me loved the rumble

Update: All sorted. I am idiot. 🙂

So, I was trying to chrono my p09 earlier and noticed that 1) it was shooting very low power compared to when I used it last weekend (brand new) and 2) when empty the slide would not lock back. I figured perhaps this is because after me using it I had not cleaned the barrel properly (causing low power) nor lubed it properly (causing slide to not come back enough to lock as I had already considered not enough gas to kick it back enough so filled the mag to near full and it still wouldn't work) Anyway, took it apart and gave it full clean in the barrel and wipe down of all the lube and re-lubed and then went to put it back together and now the slide will not allow me to cock it back properly. Bit strange because: If the locking pin is out and the pistol is held at the normal angle as if I were looking down the sights I can cock it fully If the pin is out but I hold it upright as if I were to look down it through the magwell and out the bottom it won't cock back at all (moves about a few mm and then will not budge unless I really yank it and then the whole upper comes back with it (hop unit, barrel etc.) so I can't look down the magwell as nothing opens. If the locking pin is in I can't get anything to move at all no matter how much I'm forcing it (within reason as don't want to break my new pistol(unless I have already 😥)) it is also very hard to take apart once assembled with locking pin in I have tried to look at videos of people taking it apart to see if there's anything obvious I haven't done but as far as I'm aware I did it exactly how I did it last time but now it's doing this ☹️ Pics of inside the lower and upper below - not sure if they will be of any help though as at this point I'm not sure if there's something specific I should be looking for. Let me know if anyone want's a picture of any specific part that may be of use when trying to diagnose my f*kc up

ASG CZ P-09 - Urban Grey

I thought it'd work out something like that haha... cheers mate 👍

So, in short... I'm very tempted by the MWS life after seeing an abundance of them yesterday, done a little bit of looking and as also stated in this thread there's little chance of finding them cheaper than £480ish in the UK. Seen them on Rainbow8 for 3580HKD (£370) before shipping and import etc. Does anyone have a rough idea whether that extra import cost will make it more/less/equally as expensive in the end? Is it worth the wait on shipping or should I just get one locally? There's no rush on buying one right now though as I'll either be saving the total cost or selling my AEG to fund it!

"It's like paintball but we've got little balls"

When I try to explain what airsoft is to people at work a lot of the time I get the response "so it's like paintball but without the paint, right?" and this is all those things made me think of😂

Very well said! I can understand where they guys/girls/beings (it's 2019) are coming from when they advise about the dangers of running extra weight as some may not be aware of the damage it can do and I appreciate the fact they highlighted that although it could have been done a bit less sarcastically! I'm not really one to judge though as I can be very sarcastic when I want to be 😂 Just for the record too... I wanted to get some originally as being quite a slim build I struggled to get my PC to sit on me well as there was quite a bit of movement when trying to quickly get mags out or whatever in the heat of battle regardless of how tight I had it because I don't fill out all the areas and there's no solid backing in them from the factory so I couldn't get it fixed in one position. I was planning to get a lower weight, I think they advertise options between 1.6kg - 9.4kg or higher than that by request, but I now chose 4.5kg so I can kill two birds with one stone as it's not so heavy it'll prove too challenging on the field but it's heavy enough to use for the occasional extra challenge when training. This is true with any sort of text/email/post as you can't ever purvey your actual tone in which you intend for it to be received because people can't read your facial expression or tone of voice etc. and that always seems to give people the wrong idea about what I'm saying/typing!😂

Had a go with them yesterday and they're great for getting the rig to sit on you properly! I also won a Haley D3CRH among other things so was pretty happy with the outcome to be fair!😜

hence the quotation marks, big man. lucky me won them in a raffle so should I have to ditch them I won't worry too much 👍

I've applied for the Royal Marines so I'm using them for training and airsoft alike 😁 And @TheFull9 I'm aware of the possibility of damaging knees etc. so I won't be running about for the full day with them but thanks for the 'concern' masked in smarmy sarcasm 👍