What have you made?

[Speedbird_666]

Mark II Goggle fan mount with integrated on/off switch.

 

 

 

Tested fitted - just need to solder up a switch - and find some black screws.

 

 

 

Next step - goggle strap mounted battery enclosure.

[Rogerborg]

Great work all round. I'm starting to get performance anxiety about my gobs of hot melt glue and Poundland rattle can black now.  

[MiK]

3 hours ago, Speedbird_666 said:

Mark II Goggle fan mount with integrated on/off switch.

 

 

 

Tested fitted - just need to solder up a switch - and find some black screws.

 

Next step - goggle strap mounted battery enclosure.

 

I really need to get a 3D printer but I might miss making shit with my hands - those resin printers look sexy tho……

 

 

@mightyjebus I might “if” I was you and since you seem to have a 3D printer* I would serious think about encasing those rare earth magnets with a case of some sort cuss when they get a sharp shock they have been known to shatter - think of your eyes buddy

 

*as I don’t currently have one I would use some Sugru just to stop anything coming away.

Edited June 29, 2021 by MiK

[Shamal]

5 hours ago, Rogerborg said:

Great work all round. I'm starting to get performance anxiety about my gobs of hot melt glue and Poundland rattle can black now.  

Armature. No finess. Lol😉

The pound land black is great though👍done our birdbath with it 20 times now. Doh! Wait a minute....

Regards 

[mightyjebus]

4 hours ago, MiK said:

 

I really need to get a 3D printer but I might miss making shit with my hands - those resin printers look sexy tho……

 

 

@mightyjebus I might “if” I was you and since you seem to have a 3D printer* I would serious think about encasing those rare earth magnets with a case of some sort cuss when they get a sharp shock they have been known to shatter - think of your eyes buddy

 

*as I don’t currently have one I would use some Sugru just to stop anything coming away.

yeah I had the same idea..either print something or wrap them in Sugru as I have a load of black packets here not getting used.

[MiK]

On 26/06/2021 at 17:49, Speedbird_666 said:

 

https://www.creality3dofficial.com/products/official-creality-ender-3-3d-printer?variant=31958151331913

 

lol they have a warehouse in Leicester - I’m super tempted now

[Druid799]

On 29/06/2021 at 14:57, MiK said:

@mightyjebus I might “if” I was you and since you seem to have a 3D printer* I would serious think about encasing those rare earth magnets with a case of some sort cuss when they get a sharp shock they have been known to shatter - think of your eyes buddy

OR go old school and use a fold over piece of 100mph sticky tape ? 😉

remember children K.I.S.S. 👍

[Speedbird_666]

Mk III fan mount fully finished, working and mounted, Mk I Goggle strap Battery box done (looks bigger in the picture than it actually is).

 

 

Battery box needs refinement - I forgot to radius the edges.

 

Mk II will be on the printer later today.

 

 

 

[sjhirst]

Making some extra bits for the WE MP5 GBB

Multi change suppressor and a railed handguard

[Shamal]

13 hours ago, Speedbird_666 said:

Mk III fan mount fully finished, working and mounted, Mk I Goggle strap Battery box done (looks bigger in the picture than it actually is).

 

 

Battery box needs refinement - I forgot to radius the edges.

 

Mk II will be on the printer later today.

 

 

 

Lookin' fine 👍

[TheFull9]

14 hours ago, Speedbird_666 said:

Mk III fan mount fully finished, working and mounted, Mk I Goggle strap Battery box done (looks bigger in the picture than it actually is).

 

Battery box needs refinement - I forgot to radius the edges.

 

Mk II will be on the printer later today.

 

Given the big ol' difference between quality ballistic rated goggles and the same goggles but with a fan, I think there's a huge need for simple ready-made kits (or at least the plans/links grouped together online) based on some common and popular goggle types in order for people do to these mods themselves.

[Alimcd]

Not exactly as polished as what’s being shown off in this thread but…

 

Got really frustrated reloading my new HPA DMR build so necessity being the mother of innovation, this happened

[Adolf Hamster]

and you were doing so well too.....

[Alimcd]

9 minutes ago, Adolf Hamster said:

and you were doing so well too.....

 

Ive got some 130rd mid caps for when I can get a Tanuki Works HPA adaptor, until then, changing the mag and line was too much of a pain in the middle of a game to put up with. 
 

I’ll need to see if the mechanism in the drum is capable of pushing up 0.43’s or it’s a bit of a pointless endeavour

[PopRocket123]

1 hour ago, Alimcd said:

Not exactly as polished as what’s being shown off in this thread but…

 

Got really frustrated reloading my new HPA DMR build so necessity being the mother of innovation, this happened

Jesus Christ... That's impressive

[Guest]

2 hours ago, PopRocket123 said:

Jesus Christ... That's impressive

 Yup

[Alimcd]

Ran 400 or so 0.28’s through it this morning. Dialled in the regulator but then found it’s creeping a bit when I go up to 0.43’s so ended up having to set the regulator again… 
 

I’m very happy that it feeds the 0.43’s fine and I’m getting a consistent 299-305fps @95ish psi. Only slight issue is it looks a little daft but with 2500rd capacity, zero feeding issues and a consistent output I can live with that! 
 

Im going to tidy up the JB Weld once it’s completely cured and then probably go over it with some black paint.

 

Edited July 7, 2021 by Alimcd

[HuttArmouries]

A now fully functional (but not yet pretty) front loading 12 gram co2 cartridge powered tag launcher with adjustable regulator. A nice casing is in the works. Did have to ditch the idea of a trigger mech and use a button for now but the final version should hopefully have something nicer. 

[Shamal]

Modern British plumbing at its finest.😉

Tell me,does your name begin with Frank and end in stien? Lol

Looks the biz though👍

Regards 

[sjhirst]

99.9% complete integrated flashlight handguard for my WE MP5

 

[PopRocket123]

I figured no one is going to release an airsoft BRN-180 any time soon so I'd make my own

[SeniorSpaz87]

My old STAR L86 finally started to fail on me, so I wanted to HPA it. Unfortunately the offset nozzle really limited my options, so I printed and modified a shell to fit a Polarstar F2.

[Tackle]

@SeniorSpaz87 out of interest mate, given that your in the US, how popular out there are SA80 platform guns, given that over here nearly every man & his dog are running AR platform guns ?.

[SeniorSpaz87]

5 hours ago, Tackle said:

@SeniorSpaz87 out of interest mate, given that your in the US, how popular out there are SA80 platform guns, given that over here nearly every man & his dog are running AR platform guns ?.

 

Very rare. You can buy them all but Ive seen maybe a handful myself. And I go to a lot of multi-hundred player MilSims and the like all over the country. 

[Speedbird_666]

A mate needed a thumb-saver reloading thingy for his Hi-Capa mags.

 

10 minutes in Fusion 360, and 40 minutes on the printer later, it worked out pretty good.