Gun picture thread

[Johndaniel4863]

Finally managed to get home and fit the VFC handguard to the MP5 and ditched all the MLOK...apart from the charging handle as who knows what UPS are doing with it but hopefully will turn up before Sunday!

 

Think MP5s look so much better with the older furniture and think this will suit my Sheriff loadout better than with the MLOK...but happy with the crazy rate of fire on the CM041J!! Just need to get all MLOK sold off so i can do the same to the MP5K i have!

 

Edited September 5, 2023 by Johndaniel4863

[Adenley]

 I felt the need to show this one off.

 

After years of searching I somehow managed to stumble upon this wonderful TM Aug A1 with the steel HBAR kit with the correct bipod and flash hider. Not sure how rare these kits are but I’ve only come across a small hand-full of these. Just wish I could get myself a drum mag for it it.

The inner barrel is a ridiculous 655mm in length 

Edited September 5, 2023 by Adenley

[gavinkempsell]

Well Jell... I fancy some unicorm shit too.

[ZakLav-]

Got my Rossi “L119A2” back from Negative Airsoft who has once again absolutely smashed the build. Now time for painting! 

[Gryph]

8 minutes ago, ZakLav- said:

Got my Rossi “L119A2” back from Negative Airsoft who has once again absolutely smashed the build. Now time for painting! 

Looking good mate!

[gavinkempsell]

1 hour ago, ZakLav- said:

Got my Rossi “L119A2” back from Negative Airsoft who has once again absolutely smashed the build. Now time for painting! 

What has been done to it?

[ZakLav-]

11 minutes ago, gavinkempsell said:

What has been done to it?

Full SHS compression parts and gears I believe - not sure what ratio just went with whatever he thought was best for the gun.

 

Warhead brushless motor.

 

Perun hybrid v2 mosfet.

 

rotary hop with macaron 60° bucking and zci barrel.

 

shoots about 340fps on a .20 and hops .32s with ease nice and far 

[Cannonfodder]

My relatively modest collection 

[Johndaniel4863]

MP5s almost ready for No Mans Land on sunday....

 

Just need the Marui MP5K grip to arrive tomorrow to remove the last trace of hideous MLOK and should be ready to go!

 

[Gryphus]

I bought a Krytac Alpine Vector from a fellow in these forums about a month back. Since then I've taken the gun, gutted it out and upgraded almost everything internally myself. Now shoots like a total beast and sounds great too! It was the first time I teched a gun, can't wait to take it to a game next weekend.

 

I... hope this scope doesn't look too big?

 

 

 

 

 

 

Edited September 8, 2023 by Gryphus

[Lozart]

22 hours ago, Johndaniel4863 said:

MP5s almost ready for No Mans Land on sunday....

 

Just need the Marui MP5K grip to arrive tomorrow to remove the last trace of hideous MLOK and should be ready to go!

 

 

I wouldn't worry so much about the M-Lok as that gopping stock but each to their own.

[Johndaniel4863]

@Lozart i need to keep that on for now until i can get a HK PDW folding stock mate and an 11.1 lipo ak battery to run in it to fit inside the body not the stock

Edited September 8, 2023 by Johndaniel4863

[Duff Beer]

Now with the RDS on the Elcan, and proper Grip Pod System grip.  C’est fin!

[PureSilver]

On 05/09/2023 at 20:44, Adenley said:

After years of searching I somehow managed to stumble upon this wonderful TM Aug A1 with the steel HBAR kit with the correct bipod and flash hider. Not sure how rare these kits are but I’ve only come across a small hand-full of these.

 

They are rare. I've only ever seen one for sale; I bought it and had it modified to 14mm CCW to fit my GHK. Incidentally, I still have the original, unmodified 16mm CW barrel stub from mine - if you want that as a spare, or to put on another AUG or something, just drop me a PM.

 

 

It was done by cutting a Hephaestus steel outer barrel down - each bit is full steel, including the gas block.

 

S, M, XXL

 

Not sure why I insist on waiting until I'm selling something to take decent pictures of it, but all three bits (the pistol, the light, the holster) of this slice of 2000s Navy SEAL life are sadly for sale.

 

 

 

Edited September 10, 2023 by PureSilver

[Impulse]

MWS mostly done. Will eventually replace the repro CTR stock with a real-steel Magpul one and will probably get a Visionking scope for it to replace the Strike Systems one on it at the moment. Might get a 45 degree mount for a red dot for close shooting, but we'll see.

 

Also, with the suppressor off and the stock all the way in, it fits in the smaller rifle pouch of my larger gun bag, so I can take both it and one of my (many) bolt actions in one bag now

 

[Johndaniel4863]

Was going to get a suppressor for one of my MP5s then thought HK have already solved the suppressor issue........

 

[DanBow]

Nothing flash or fancy but it is my first. 😍

 

[MrTea]

Valken ASL are the standard rental at NTAC, my local outdoors site, and what played my first three games with to get my UKARA. They're half-decent and run well. They really need a bucking/nub upgrade to be competitive.

Edited September 14, 2023 by MrTea

[DanBow]

@MrTea funnily enough,being a rental gun is how i got mine! The site i play at use them and i was asking questions about it as it seemed like a good starter rif. Turns out one of the otheres there had bought s mew one but not used it a lot, so a deal was done. 😁

 

I did strip it down a couple of nights ago and saw that there is only a flimsy ring between the barrel and hopper. Its been added to the top of my shopping list! Lol

[MrTea]

On 10/09/2023 at 10:18, Duff Beer said:

Now with the RDS on the Elcan, and proper Grip Pod System grip.  C’est fin!

Question about your flash hider, I have one of those Airsoft Artisan ones and only just got around to putting it on the G&G L85... where the outer barrel isn't threaded. The standard flash hider just slides on and there's a pin that secures into a groove on the outer barrel.

Are G&G doing strange things with their L85A2 and do the ICS ones have a threaded barrel?

Edited September 16, 2023 by MrTea

[Hobbnob]

A couple of my MWS's, top is a colt 723 with a Nova receiver, VFC Ops Inc suppressor and a few other bits and pieces for a 90's delta build, and the second is an M16A4 as seen in its transitional era during the Iraq war

[Impulse]

39 minutes ago, Hobbnob said:

A couple of my MWS's, top is a colt 723 with a Nova receiver, VFC Ops Inc suppressor and a few other bits and pieces for a 90's delta build, and the second is an M16A4 as seen in its transitional era during the Iraq war

 

Open dust covers 🤢

 

Seriously though, love them. Especially the longboi! Not enough people run long MWS builds

[Hobbnob]

21 minutes ago, Impulse said:

 

Open dust covers 🤢

 

Seriously though, love them. Especially the longboi! Not enough people run long MWS builds

Thanks! They used to be unicorns but there was actually a point a year or two ago that it was possible to build one, I'm very lucky to be benefitting from that

 

(Edit: unless you use angry gun, but everyone should know how that will go  )

 

I'm thinking of doing a C7 or MK12 Mod 0 build at some point in future but it'll be a while before parts availability and budget lines up

Edited September 16, 2023 by Hobbnob

[MILITATED]

On 16/09/2023 at 22:21, Hobbnob said:

A couple of my MWS's, top is a colt 723 with a Nova receiver, VFC Ops Inc suppressor and a few other bits and pieces for a 90's delta build, and the second is an M16A4 as seen in its transitional era during the Iraq war

That M16 is a dream, I have to build one 😱 Do you happen to have a parts list floating about? Excellent job

[Impulse]

On 16/09/2023 at 23:18, Hobbnob said:

Thanks! They used to be unicorns but there was actually a point a year or two ago that it was possible to build one, I'm very lucky to be benefitting from that

 

(Edit: unless you use angry gun, but everyone should know how that will go  )

 

I'm thinking of doing a C7 or MK12 Mod 0 build at some point in future but it'll be a while before parts availability and budget lines up

 

I try to avoid Angry Gun parts like the plague as I have heard there are... issues . I did an m16a4 build with G&P AEG parts, but recently swapped out for MK12 Mod 1 parts (posted it a bit further up) and it has firmly cemented its spot as my go-to non-bolt action rifle. I absolutely love the aesthetic of it!