SBoardley Posted December 14, 2021 Share Posted December 14, 2021 18 minutes ago, Enid_Puceflange said: Just purchased a few cnc items from Pablo Vila Ferrero in the GHK owners Facebook group. Not cheap, but should be worth it. If you have to ask, you don’t deserve to know what they are 😉 Hopefully here within a week or so from Madrid 😎 I think I may go get an order in for some Ak ones after chrimbo. Heard they work flawlessly. Enid_Puceflange 1 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted December 15, 2021 Share Posted December 15, 2021 13 hours ago, SBoardley said: I think I may go get an order in for some Ak ones after chrimbo. Heard they work flawlessly. Im looking forward to finding out My M4 is in hibernation until warmer days 🙁 Link to comment Share on other sites More sharing options...
SBoardley Posted December 15, 2021 Share Posted December 15, 2021 10 hours ago, Enid_Puceflange said: Im looking forward to finding out My M4 is in hibernation until warmer days 🙁 Have you dh yet? Apparently this negates the British weather, but I must say my years of gbb experience kinda prefers green gas with some kind of lube it to maintain those seals…. Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted December 16, 2021 Share Posted December 16, 2021 (edited) 2 hours ago, SBoardley said: Have you dh yet? Apparently this negates the British weather, but I must say my years of gbb experience kinda prefers green gas with some kind of lube it to maintain those seals…. I tried Propane, it stank and was terrible though my MP9 liked it 🤷🏻♂️ I have Co2 mags that take 12g capsules, tried them in colder weather , it too was a poor result. So I will be sticking to green gas. I have 6 gg mags, so hopefully won’t suffer (the gbbr habit is infuriating 😂 ) Last game with it I was frantically bombing up every chance I got. I Did get circa 120 shots per mag though, so efficiency on gg is really good Edited December 16, 2021 by Enid_Puceflange Paul72 and SBoardley 2 Link to comment Share on other sites More sharing options...
MagpieTactical Posted December 16, 2021 Share Posted December 16, 2021 (edited) A couple of stock accessories. The Airtech Studios extension for the ARP556 And a Guarder Stock Pad for the XM177 Edited December 16, 2021 by MagpieTactical Tactical Pith Helmet, Monkman, Druid799 and 1 other 4 Link to comment Share on other sites More sharing options...
strykerles Posted December 17, 2021 Share Posted December 17, 2021 Cyma MP5 PDW "blue" 3X Cyma Mp5 midcaps 3x Vss Midcaps single point sling 3000 .43 bbs Link to comment Share on other sites More sharing options...
Guest Mr. No_Face Posted December 17, 2021 Share Posted December 17, 2021 FMA helmet bridge cover Patrol Base recently stocked up on more mp7 aeg mags so grabbed two more of those. Now Running 6 mags. Condor Tidepool hydration carrier Still on the look out for a gopro hero 7 or a condor roam 2(3) to replace my outdated condor 1. Link to comment Share on other sites More sharing options...
Guest Posted December 18, 2021 Share Posted December 18, 2021 New Vortex Spitfire clone, basically perfect for 1/4 the price Link to comment Share on other sites More sharing options...
Alimcd Posted December 18, 2021 Share Posted December 18, 2021 (edited) 37 minutes ago, rocketdogbert said: New Vortex Spitfire clone, basically perfect for 1/4 the price This has made my day. Took a punt on one a couple of weeks ago, assumed it’d be tosh! I hope they do the 5x as well, I won’t be able to resist Edited December 18, 2021 by Alimcd Link to comment Share on other sites More sharing options...
RostokMcSpoons Posted December 18, 2021 Share Posted December 18, 2021 2 hours ago, rocketdogbert said: New Vortex Spitfire clone, basically perfect for 1/4 the price That looks excellent, where did you get it from? 3x mag with a red dot and wide field of view seems a better bet than the 4x32 scope I've tried and didn't really get on with Link to comment Share on other sites More sharing options...
Alimcd Posted December 18, 2021 Share Posted December 18, 2021 You’ll have to get yourself on AliExpress. Search for “Spitfire scope” and you’ll find several sellers with them. Paul72 and RostokMcSpoons 2 Link to comment Share on other sites More sharing options...
Guest Posted December 18, 2021 Share Posted December 18, 2021 7 minutes ago, RostokMcSpoons said: That looks excellent, where did you get it from? 3x mag with a red dot and wide field of view seems a better bet than the 4x32 scope I've tried and didn't really get on with It’s not a wide field of view, but Aliexpress Link to comment Share on other sites More sharing options...
Tactical Pith Helmet Posted December 18, 2021 Share Posted December 18, 2021 (edited) Ordered this a couple of weeks ago. Big thanks to those who commented on my 'will this be suitable for AK mags' post. It easily takes two AK mags per pouch, with a weird divider in front of them that lies flat, but may accept an M4 mag. With smaller mags the flaps close further. There are two male studs per female stud that are mounted one above the other. There is also enough velcro to make the studs a bit superfluous tbh. The thing takes eight AK mags in total, which in real terms is about five over what you need, but it's semi-precision dressing up init. The mag sections are easy big enough for bag of BBs, speedloader and bottle of water, so the square side poaches won't get used. I may even glue them flat from the inside with weak water based glue. The space under the chest opening is cavernous if you are a sheet of cardboard. Might be useful for a section of old roll mat for sitting on. The quality is pretty good, no loose threads or weak looking corners, although the stitching is only single row with reinforced stress points, so I wouldn't fancy being carried/dragged by it. The buckles could grip the straps better but that's 90% of kit with polyester straps. Shoulder straps are not too generous, it may ride a bit high if you are built like a gorilla. I'll adjust it to my liking and tape the straps into place. The green one is similar in shade to a new British lightweight shirt, but shinier obvs. For less than £20 it's a decent enough ANA replica that's about a fifth of the price. It won't impress stitch counters but this is an annual couple of milsims, not reenactment. https://www.ebay.co.uk/itm/304117709117?var=603240124544 Edited December 18, 2021 by Tactical Pith Helmet Added comment re: velcro MagpieTactical, Jacob Wright, Tackle and 1 other 4 Link to comment Share on other sites More sharing options...
Guest Posted December 20, 2021 Share Posted December 20, 2021 Link to comment Share on other sites More sharing options...
RostokMcSpoons Posted December 20, 2021 Share Posted December 20, 2021 (edited) Got me one of these from that there AliExpress... a £21 chronograph so I can check whether my 'upgrades' make things better or worse ... my God it's small! (it's about 1" in height) The tube that you shoot down is very narrow, hence those brass tubes which are used to position the chrono on the end of the barrel (here it's set up for my 35mm diameter silencer) It seems to work ok, but the normal-sized ones have the big advantage of not needing to faff around with those mounting tubes (or risking damaging the inside of the chrono if it's wrongly positioned) Edited February 13 by RostokMcSpoons Paul72, Tackle and Tactical Pith Helmet 3 Link to comment Share on other sites More sharing options...
Cr0-Magnon Posted December 20, 2021 Share Posted December 20, 2021 13 minutes ago, RostokMcSpoons said: Got me one of these from that there AliExpress... a £21 chronograph so I can check whether my 'upgrades' make things better or worse ... my God it's small! (it's about 1" in height) The tube that you shoot down is very narrow, hence those brass tubes which are used to position the chrono on the end of the barrel (here it's set up for my 35mm diameter silencer) It seems to work ok, but the normal-sized ones have the big advantage of not needing to faff around with those mounting tubes (or risking damaging the inside of the chrono if it's wrongly positioned) I've got one of these. Seems accurate but yeah, didn't bother with the mounting tubes and have shot the hell out of it. Whoops. RostokMcSpoons, Tactical Pith Helmet and Paul72 3 Link to comment Share on other sites More sharing options...
Impulse Posted December 20, 2021 Share Posted December 20, 2021 Patrolbase messed up my order so I got them to exchange it for an item of similar value. Got this for £75 (the rifle, not the extra bits. Those I already had!) including postage with a bottle of .3s. It's supposedly VSR compatible, so I'll find out to what extent when I get a 60 degree autobot rubber and omega nub in the next few days. From a cylinder/trigger perspective, it isn't VSR compatible as the cylinder is slightly shorter and the trigger box isn't quite the same size. It didn't accept my Laylax cylinder and SCW S-trigger, though the parts inside the cylinder looked like they could be compatible, so if it breaks I'll try putting my SCW piston and spring guide in there. Chrono'd at 0.95J on a .32, so I'm not going to be taking apart the cylinder anyway until it breaks, as I like my spring snipers to be lower power with no MED, as my HPA VSR is more than capable of doing 2.3J and lower power is quieter for spring guns. Is it as good as the VSR? No. The bolt pull is a bit weird and requires some force to push it back into place, even after lubing the outside of the cylinder with PTFE grease. I think it's a little louder than my 1.1J spring VSR build, it's a bit heavier than the VSR and, obviously, it's 0.95J as opposed to my 1.1J VSR which is right on the limit. However, I wouldn't say it was a bad purchase. If it sucks on the range after I put the Maple Leaf rubber in when I take it to my local site in the new year, then it'll be bad, but I really like the fact it's relatively unique (don't see many m40a3 builds out there) and love the adjustable stock and cheek rest. Also, having QD sling attachments is nice as I have a genuine magpul ms4 gathering dust on my TM416D that I never use as I don't like AEGs (even recoil ones like my 416!) since buying and firing my TM AKM GBBR and I have no other guns that can use it. I guess I could get the Maple Leaf stock for the VSR, but I just... don't like it. Tactical Pith Helmet 1 Link to comment Share on other sites More sharing options...
Davegolf Posted December 20, 2021 Share Posted December 20, 2021 Always comes back to AK love 😁 Link to comment Share on other sites More sharing options...
paradoxum Posted December 22, 2021 Share Posted December 22, 2021 (edited) I got my WADSN Unity / hotbuttons: ### Need to swap the button behind the dbal back to a button with a RAMP, not enough room in front of the eotech to easily get my thumb in there. Like this: Only it'll be a tan button with a smaller connector. Edited December 22, 2021 by paradoxum Tactical Pith Helmet and Monkman 2 Link to comment Share on other sites More sharing options...
Monkman Posted December 22, 2021 Share Posted December 22, 2021 One of my Xmas presents to myself has come in the post... All the credits are my teams guys.... Link to comment Share on other sites More sharing options...
RostokMcSpoons Posted December 22, 2021 Share Posted December 22, 2021 ... hmmm Scrooged? (That's what your pic(s) look to me) Link to comment Share on other sites More sharing options...
RostokMcSpoons Posted December 22, 2021 Share Posted December 22, 2021 (edited) Santa (UPS) arrived early this year... But I'm not going to open the box until Christmas morning. Oh, the anticip...... .... ation Also... 18,000 Bio 0.28g BBs, an M105 spring, and a nozzle and fuses for my AK. Edited December 22, 2021 by RostokMcSpoons Tactical Pith Helmet and Paul72 1 1 Link to comment Share on other sites More sharing options...
Nick G Posted December 22, 2021 Share Posted December 22, 2021 18 minutes ago, RostokMcSpoons said: Santa (UPS) arrived early this year... But I'm not going to open the box until Christmas morning. Oh, the anticip...... .... ation Also... 18,000 Bio 0.28g BBs, an M105 spring, and a nozzle and fuses for my AK. ups actually managed to deliver something ? Holy shit, it's a Christmas miracle ! Paul72 1 Link to comment Share on other sites More sharing options...
PopRocket123 Posted December 22, 2021 Share Posted December 22, 2021 4 hours ago, paradoxum said: I got my WADSN Unity / hotbuttons: ### Need to swap the button behind the dbal back to a button with a RAMP, not enough room in front of the eotech to easily get my thumb in there. Like this: Only it'll be a tan button with a smaller connector. Your ability to keep finding new stuff to strap to your poor SCAR never ceases to amaze me Nick G and Paul72 2 Link to comment Share on other sites More sharing options...
RostokMcSpoons Posted December 22, 2021 Share Posted December 22, 2021 58 minutes ago, Nick G said: ups actually managed to deliver something ? Holy shit, it's a Christmas miracle ! AND he knocked on the door and waited until someone answered! (Admittedly it was me, and it took me approximately 3.2 seconds to run down the stairs as I got that spidey-sense tingle, in spite of the fact that just 4 minutes prior I'd sent an email to JD Airsoft to ask if my gun had been sent yet, as the order status was still 'preparing'!) And he smiled nicely and wished me a happy Xmas. So actually an effort 'Worthy Of Laudation' from the UPS chap this time. Paul72 and Nick G 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now