Speedbird_666 Posted June 29, 2021 Share Posted June 29, 2021 Mark II Goggle fan mount with integrated on/off switch. Tested fitted - just need to solder up a switch - and find some black screws. Next step - goggle strap mounted battery enclosure. Jaylordofwaargh, PopRocket123 and Rogerborg 3 Link to comment Share on other sites More sharing options...
Supporters Rogerborg Posted June 29, 2021 Supporters Share Posted June 29, 2021 Great work all round. I'm starting to get performance anxiety about my gobs of hot melt glue and Poundland rattle can black now. Speedbird_666 and Tackle 1 1 Link to comment Share on other sites More sharing options...
MiK Posted June 29, 2021 Share Posted June 29, 2021 (edited) 3 hours ago, Speedbird_666 said: Mark II Goggle fan mount with integrated on/off switch. Tested fitted - just need to solder up a switch - and find some black screws. Next step - goggle strap mounted battery enclosure. I really need to get a 3D printer but I might miss making shit with my hands - those resin printers look sexy tho…… @mightyjebus I might “if” I was you and since you seem to have a 3D printer* I would serious think about encasing those rare earth magnets with a case of some sort cuss when they get a sharp shock they have been known to shatter - think of your eyes buddy *as I don’t currently have one I would use some Sugru just to stop anything coming away. Edited June 29, 2021 by MiK Link to comment Share on other sites More sharing options...
Shamal Posted June 29, 2021 Share Posted June 29, 2021 5 hours ago, Rogerborg said: Great work all round. I'm starting to get performance anxiety about my gobs of hot melt glue and Poundland rattle can black now. Armature. No finess. Lol😉 The pound land black is great though👍done our birdbath with it 20 times now. Doh! Wait a minute.... Regards Rogerborg 1 Link to comment Share on other sites More sharing options...
mightyjebus Posted June 29, 2021 Share Posted June 29, 2021 4 hours ago, MiK said: I really need to get a 3D printer but I might miss making shit with my hands - those resin printers look sexy tho…… @mightyjebus I might “if” I was you and since you seem to have a 3D printer* I would serious think about encasing those rare earth magnets with a case of some sort cuss when they get a sharp shock they have been known to shatter - think of your eyes buddy *as I don’t currently have one I would use some Sugru just to stop anything coming away. yeah I had the same idea..either print something or wrap them in Sugru as I have a load of black packets here not getting used. Link to comment Share on other sites More sharing options...
MiK Posted June 29, 2021 Share Posted June 29, 2021 On 26/06/2021 at 17:49, Speedbird_666 said: https://www.creality3dofficial.com/products/official-creality-ender-3-3d-printer?variant=31958151331913 lol they have a warehouse in Leicester - I’m super tempted now Link to comment Share on other sites More sharing options...
Supporters Druid799 Posted June 30, 2021 Supporters Share Posted June 30, 2021 On 29/06/2021 at 14:57, MiK said: @mightyjebus I might “if” I was you and since you seem to have a 3D printer* I would serious think about encasing those rare earth magnets with a case of some sort cuss when they get a sharp shock they have been known to shatter - think of your eyes buddy OR go old school and use a fold over piece of 100mph sticky tape ? 😉 remember children K.I.S.S. 👍 Link to comment Share on other sites More sharing options...
Speedbird_666 Posted July 2, 2021 Share Posted July 2, 2021 Mk III fan mount fully finished, working and mounted, Mk I Goggle strap Battery box done (looks bigger in the picture than it actually is). Battery box needs refinement - I forgot to radius the edges. Mk II will be on the printer later today. TheFull9, Enid_Puceflange and PopRocket123 3 Link to comment Share on other sites More sharing options...
sjhirst Posted July 2, 2021 Share Posted July 2, 2021 Making some extra bits for the WE MP5 GBB Multi change suppressor and a railed handguard SSPKali 1 Link to comment Share on other sites More sharing options...
Shamal Posted July 2, 2021 Share Posted July 2, 2021 13 hours ago, Speedbird_666 said: Mk III fan mount fully finished, working and mounted, Mk I Goggle strap Battery box done (looks bigger in the picture than it actually is). Battery box needs refinement - I forgot to radius the edges. Mk II will be on the printer later today. Lookin' fine 👍 Speedbird_666 1 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted July 2, 2021 Supporters Share Posted July 2, 2021 14 hours ago, Speedbird_666 said: Mk III fan mount fully finished, working and mounted, Mk I Goggle strap Battery box done (looks bigger in the picture than it actually is). Battery box needs refinement - I forgot to radius the edges. Mk II will be on the printer later today. Given the big ol' difference between quality ballistic rated goggles and the same goggles but with a fan, I think there's a huge need for simple ready-made kits (or at least the plans/links grouped together online) based on some common and popular goggle types in order for people do to these mods themselves. SSPKali, Druid799 and Speedbird_666 3 Link to comment Share on other sites More sharing options...
Alimcd Posted July 6, 2021 Share Posted July 6, 2021 Not exactly as polished as what’s being shown off in this thread but… Got really frustrated reloading my new HPA DMR build so necessity being the mother of innovation, this happened GothicGhost, Druid799 and sjhirst 1 2 Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted July 6, 2021 Supporters Share Posted July 6, 2021 and you were doing so well too..... Alimcd 1 Link to comment Share on other sites More sharing options...
Alimcd Posted July 6, 2021 Share Posted July 6, 2021 9 minutes ago, Adolf Hamster said: and you were doing so well too..... Ive got some 130rd mid caps for when I can get a Tanuki Works HPA adaptor, until then, changing the mag and line was too much of a pain in the middle of a game to put up with. I’ll need to see if the mechanism in the drum is capable of pushing up 0.43’s or it’s a bit of a pointless endeavour Link to comment Share on other sites More sharing options...
PopRocket123 Posted July 6, 2021 Share Posted July 6, 2021 1 hour ago, Alimcd said: Not exactly as polished as what’s being shown off in this thread but… Got really frustrated reloading my new HPA DMR build so necessity being the mother of innovation, this happened Jesus Christ... That's impressive Link to comment Share on other sites More sharing options...
Guest Posted July 6, 2021 Share Posted July 6, 2021 2 hours ago, PopRocket123 said: Jesus Christ... That's impressive Yup Link to comment Share on other sites More sharing options...
Alimcd Posted July 7, 2021 Share Posted July 7, 2021 (edited) Ran 400 or so 0.28’s through it this morning. Dialled in the regulator but then found it’s creeping a bit when I go up to 0.43’s so ended up having to set the regulator again… I’m very happy that it feeds the 0.43’s fine and I’m getting a consistent 299-305fps @95ish psi. Only slight issue is it looks a little daft but with 2500rd capacity, zero feeding issues and a consistent output I can live with that! Im going to tidy up the JB Weld once it’s completely cured and then probably go over it with some black paint. Edited July 7, 2021 by Alimcd PopRocket123 1 Link to comment Share on other sites More sharing options...
HuttArmouries Posted July 11, 2021 Share Posted July 11, 2021 A now fully functional (but not yet pretty) front loading 12 gram co2 cartridge powered tag launcher with adjustable regulator. A nice casing is in the works. Did have to ditch the idea of a trigger mech and use a button for now but the final version should hopefully have something nicer. Druid799, TheFull9 and sjhirst 2 1 Link to comment Share on other sites More sharing options...
Shamal Posted July 11, 2021 Share Posted July 11, 2021 Modern British plumbing at its finest.😉 Tell me,does your name begin with Frank and end in stien? Lol Looks the biz though👍 Regards Link to comment Share on other sites More sharing options...
sjhirst Posted July 11, 2021 Share Posted July 11, 2021 99.9% complete integrated flashlight handguard for my WE MP5 BigStew, PopRocket123, Diemaco and 1 other 4 Link to comment Share on other sites More sharing options...
PopRocket123 Posted July 17, 2021 Share Posted July 17, 2021 I figured no one is going to release an airsoft BRN-180 any time soon so I'd make my own Druid799 and TheFull9 2 Link to comment Share on other sites More sharing options...
Supporters SeniorSpaz87 Posted July 20, 2021 Supporters Share Posted July 20, 2021 My old STAR L86 finally started to fail on me, so I wanted to HPA it. Unfortunately the offset nozzle really limited my options, so I printed and modified a shell to fit a Polarstar F2. TheFull9 and Tackle 1 1 Link to comment Share on other sites More sharing options...
Moderators Tackle Posted July 20, 2021 Moderators Share Posted July 20, 2021 @SeniorSpaz87 out of interest mate, given that your in the US, how popular out there are SA80 platform guns, given that over here nearly every man & his dog are running AR platform guns ?. Link to comment Share on other sites More sharing options...
Supporters SeniorSpaz87 Posted July 20, 2021 Supporters Share Posted July 20, 2021 5 hours ago, Tackle said: @SeniorSpaz87 out of interest mate, given that your in the US, how popular out there are SA80 platform guns, given that over here nearly every man & his dog are running AR platform guns ?. Very rare. You can buy them all but Ive seen maybe a handful myself. And I go to a lot of multi-hundred player MilSims and the like all over the country. Druid799 and Tackle 1 1 Link to comment Share on other sites More sharing options...
Popular Post Speedbird_666 Posted July 25, 2021 Popular Post Share Posted July 25, 2021 A mate needed a thumb-saver reloading thingy for his Hi-Capa mags. 10 minutes in Fusion 360, and 40 minutes on the printer later, it worked out pretty good. Druid799, TheFull9, Spacemonkey and 4 others 6 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now