Supporters TheFull9 Posted September 6 Supporters Share Posted September 6 That's a beautiful thing, aspirational honestly. Link to comment Share on other sites More sharing options...
Impulse Posted September 6 Share Posted September 6 (edited) New gun acquired and will be taking it to AI500 at Anzio next month (which will be my first game since my heart surgery). Still waiting on the suppressor, but apparently should have that in 2 or 3 weeks time as Jason at Longbow is waiting for a shipment to get through customs and should have it soon. Setup is: - Silverback SRS 16" - WASP piston with medium weight - Rapax 2J spring - FAST hop unit and nub - Maple Leaf MR 60d bucking - PDI 6.08 420mm stainless steel barrel - Silverback open piston sear - Coke can mod - Vector Optics Paragon 3-15x50mm SFP scope w/ Vector Optics extra high 30mm rings - Magpul MS4 sling - Still waiting on the Silverback DTSS .308 suppressor Going to fine tune it on Sunday by setting the hop up properly and using some Rapax spring spacers to fine tune the power, but with the hop set probably more than I'll really need, it was chronoing consistently at 2.05J on .48s in my room when I chrono'd into a bag. Later down the line when I'm properly back into playing, I'm going to try using it slung on my back when I'm running around with my short MWS. Use the MWS as I'm moving about, pull out the SRS once I get into a good position. Weight isn't so much of a factor for me (it's definitely heavier than my VSR), what I really wanted was something short that isn't going to smack into trees and stuff, so hopefully this'll fit the bill for what I want to use it for. If not, it'll be a good bolt action for winter because my green gas m700s are a bit crap when it gets really cold. Edited September 6 by Impulse Darkmikey22 and ButcherBill 2 Link to comment Share on other sites More sharing options...
ButcherBill Posted September 6 Share Posted September 6 FFS, don't go full wookie & take it easy. Impulse 1 Link to comment Share on other sites More sharing options...
Impulse Posted September 6 Share Posted September 6 15 minutes ago, ButcherBill said: FFS, don't go full wookie & take it easy. Haha, I probably won't be bringing the cape and boonie setup that I usually run because I don't have a way to run both earpro and comms with my ghillie boonie (I can do one or the other, but not both ), so I'll probably just bring a cobra hood and a cap to AI500, but that's part of the reason I'm sniping; I'll be taking it pretty easy, just taking up overwatch positions either in buildings or covering buildings and leaving the CQB to my team mates. I'm good to start exercising again from Monday, so I'll be fine for AI500; I'll just still be on blood thinners until then and my local site is covered in brambles that just love to slice me to pieces so I'm not playing until I'm off the blood thinners next month, but I'm back to swimming from Monday so I'll be more than able to play at AI500 from a fitness perspective. Original plan was to do the MWS + SRS + pistol setup for AI500, but as it's going to be my first game back, I'm going lightweight so I'm just bringing two bolt actions and two pistols (one to use, one as a backup) and playing passive. I think it's the more sensible approach ButcherBill 1 Link to comment Share on other sites More sharing options...
Popular Post mightyjebus Posted September 9 Popular Post Share Posted September 9 "I want a MP7" "We have MP7 at home" MP7 at home. Darkmikey22, AirsoftTed, PopRocket123 and 3 others 4 2 Link to comment Share on other sites More sharing options...
Justjay1986 Posted September 17 Share Posted September 17 (edited) New toy, yet to be tried out properly....love it already. Noveske N4, 120% recoil spring and aluminium buffer with one weight. Jaeger precisions npas installed and that's a nice one i must be honest. https://i.imgur.com/8loqruk.jpeg Edited September 17 by Justjay1986 ButcherBill and Tackle 2 Link to comment Share on other sites More sharing options...
Popular Post Asomodai Posted September 18 Popular Post Share Posted September 18 Going down from 36 rifles and a majority bullpup collection to these 6 was quite difficult. But I am dead happy with it and they are P. Cool. 😉 E&L AKM LCT AMD-65 LCT AKMSU Silverback SRS TM MK23 TM FN-57 The only thing I might consider at this point is an LCT AMD-63 and a decent MP5SD2 ButcherBill, Tackle, JinxDuh and 3 others 5 1 Link to comment Share on other sites More sharing options...
Supporters Lozart Posted September 19 Supporters Share Posted September 19 11 hours ago, Asomodai said: The only thing I might consider at this point is an LCT AMD-63 and a decent MP5SD2 and so it begins again... Link to comment Share on other sites More sharing options...
Impulse Posted September 19 Share Posted September 19 12 hours ago, Asomodai said: Going down from 36 rifles and a majority bullpup collection to these 6 was quite difficult. But I am dead happy with it and they are P. Cool. 😉 That's quite the shrink down! I've been tempted to shrink my collection, but every time I try I get disheartened by what people offer. Had someone offer me £400 for a £1200+ build, for example, and that just put me off it since I don't need the money. Link to comment Share on other sites More sharing options...
ButcherBill Posted September 19 Share Posted September 19 21 hours ago, Asomodai said: Going down from 36 rifles and a majority bullpup collection to these 6 was quite difficult. Kept all my boxes... just in case I decide to sell any in the future. p.s. my shed's stuffed to the gunnels with cardoard bloody boxes. Jacob Wright 1 Link to comment Share on other sites More sharing options...
Popular Post MistakenMexican Posted September 19 Popular Post Share Posted September 19 Nick G, Panama, MasterGouken and 5 others 7 1 Link to comment Share on other sites More sharing options...
MasterGouken Posted September 22 Share Posted September 22 Updated my PTW to a more civvy style, infinity gearbox and HAO externals with a Vector Optics Frenzy solar reflex sight Nick G, MILITATED and ButcherBill 2 1 Link to comment Share on other sites More sharing options...
ButcherBill Posted September 22 Share Posted September 22 Got a couple of new pistols recently so had a wee move around with them, thought I'd incorporate my 'new' hobby at the same time. GenuineGerman and lokkers 2 Link to comment Share on other sites More sharing options...
mightyjebus Posted September 23 Share Posted September 23 For the "older" airsofter who's eyesight is quite what it used to be. MasterGouken, ButcherBill and Tackle 2 1 Link to comment Share on other sites More sharing options...
Moderators Tackle Posted September 23 Moderators Share Posted September 23 32 minutes ago, mightyjebus said: For the "older" airsofter who's eyesight is quite what it used to be. What is it, one of the well miniguns ? Link to comment Share on other sites More sharing options...
mightyjebus Posted September 23 Share Posted September 23 6 minutes ago, Tackle said: What is it, one of the well miniguns ? yup, its their mini mini gun Tackle 1 Link to comment Share on other sites More sharing options...
Moderators Tackle Posted September 23 Moderators Share Posted September 23 10 minutes ago, mightyjebus said: yup, its their mini mini gun I like it. Not a fan of "wanker guns" as such, but for a giggle it looks like it could cause mayhem😈 Link to comment Share on other sites More sharing options...
mightyjebus Posted September 23 Share Posted September 23 it comes with an arm brace so you could rock 2 of them for complete overkill. ROF on a 7.4 is stupidly fast and the 600 round mags will last about a minute. each barrel has an adjustable hop as well so it's well designed and pretty rock solid. Only crapish part is the stock is loose and could have done with the arms being a slight bit thicker to get rid of the wobble. It's stupid and I like it Tackle 1 Link to comment Share on other sites More sharing options...
Popular Post MILITATED Posted September 24 Popular Post Share Posted September 24 Razor or UH-1 🤔 Cat was somewhat interested too MistakenMexican, Alimcd, GenuineGerman and 3 others 3 2 1 Link to comment Share on other sites More sharing options...
Alimcd Posted September 26 Share Posted September 26 Got to be the UH-1 on that build for me. Picked up a new stock to further stubbify my stubby AR build. The steel bolt feels like it’ll dislodge fillings with the extra compression the the short buffer tube gives the recoil spring! GothicGhost and Tackle 1 1 Link to comment Share on other sites More sharing options...
Amokura Posted September 26 Share Posted September 26 AK-104 with other barrel assembly swap, to imitate AK-103. lokkers 1 Link to comment Share on other sites More sharing options...
Barry Sayer Posted September 28 Share Posted September 28 ButcherBill, Jacob Wright and JinxDuh 3 Link to comment Share on other sites More sharing options...
MistakenMexican Posted October 3 Share Posted October 3 My latest Marui G17.5. cerakoted in Midnight Bronze by West Laser 👌🏽 ButcherBill and Nick G 2 Link to comment Share on other sites More sharing options...
Johndaniel4863 Posted October 3 Share Posted October 3 The latest to my Glock Collection, just waiting on a G34 tomorrow then get a G18 on payday...and find a donor Glock 26 one day to complete the green G26 MistakenMexican, Nick G and ButcherBill 3 Link to comment Share on other sites More sharing options...
GiantKiwi Posted October 3 Share Posted October 3 Newly acquired DE N4. Immediately replaced the nozzle with a GM 3.5 (with DE piston head) so I could fit the Jaeger NPAS. Barrel swapped for a Crazy Jet 345mm, because I couldn't find a 350 in any reasonable timeframe - Silverback GBB 60 Degree and Titan Nub for the hop. Paraphenalia on the externals are Irregular Designs inspired cheek riser, Vector Maverick Gen III on a clone unity micro mount, PTS Dead Air Sandman-K (tracer type), Magpul AFG and an M300 clone. SP Systems HPA adapter, which miraculously didn't need the router changed, despite it being a T8 platform one. Panama, ButcherBill, Nick G and 1 other 4 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now