SSPKali
-
Posts
628 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Posts posted by SSPKali
-
-
- Popular Post
5 minutes ago, Rogerborg said:Pouring one out for our banned homies.
They can’t ban you if you never play at their site
- Cannonfodder, Rogerborg, Jacob Wright and 3 others
-
5
-
1
-
really tricky to tell from the photo but it does look a little off to one side....but that could just be because taking a pic like that is so tricky! G&G ammo should give good results so you can rule that out (although experimenting with different ammo in the future might be a good idea....lets sort this issue first!)
I would give it a go with the flash hider completely removed just to rule out the outer barrel bore and the flash hider threads being cut at an angle to each other! Stranger things have happened with "Airsoft tolerances"
Also "tight bore barrel =/= accuracy" as TM use 6.08mm dia and get really good results as the air gives a nice cushion around the BB stopping it pin-balling down the barrel. It isn't an air rifle pellet / rifle bullet so no engagement with the rifling needed
-
Best: TM MWS (it isn't hype) SADF M83 chest rig (comfortable and adaptable) Esstac Kywi mag pouches, Delta Mike face pro. Honourable mention to Cyma AKS-74u and MP5 - great guns and easy to work on when needed. Pentagon Wolf trousers and UBACS tops.
Worst: G&P MOE M4 - horrible externals (but internals ok); big bulky plate carriers (zero benefit in Airsoft and so hot and sweaty) mesh face pro (just nasty) MucOff anti fog (would be better off using mud)
-
Are the BBs hitting the flash hider / suppressor / other accessory? Maybe check the hop rubber, nub and chamber are all aligned, tight and clean of any grease.
What brand of BBs are you using and were they accurate before the recent work?
-
1 hour ago, Tackle said:
No disputing it's a cool bit of kit, but it's not cheap for an occasional Airsoft loadout that's fairly limited in its use, for example, no Hydration capabilities, would I want to wear a full suit just to achieve the "look" at this time of year ?
😜
PS, wasn't there an rmp covert vest not unlike that for considerably less shekels ?
Arktis make a couple of low profile and covert rigs for much less 👍
- Tackle and AirsoftTed
-
2
-
Fitted the Hao heavy bolt end and G&P buffer spring (as the very old stock one is weak and shrinking!) to the stock MWS bolt carrier yesterday.
Using the AG High Speed buffer weight (Alu) with the Hao end there is definitely more of a thump to the recoil but the TM mags were still giving ~120 shots before any obvious drop in FPS. Would still clear 140 BBs and lock back 👍 Action was nice and snappy and even full auto was fast.
Now to find an AG Steel buffer weight to try it with…
-
-
@Joe142 some solid kit there! I use a fair few of those brands and they work well ( DM, FRV, 5.11 jeans are my daily wear!) Looks good and should perform well.
You might be able to lose the HS Flatpack as UCAP VENDETTA isn’t that big and getting stuff out is a PITA. Might see you there at the end of the month!
-
-
1 hour ago, werkzeug said:
Mag science is absolutely ridiculous in MWS-land, pmags look gorgeous but aren’t they barely usable? I wonder if there is any one who uses them day-to-day.
Yeah, but they are the TM Discord dwellers who have replaced 99% of their MWS with bits from umpteen different brands as they are <Skylar voice> uPgRaDeS!!!1!1!1! </Skylar voice> and the magazine issues are hardly noticeable against all the other major issues they are having 😂
Stick with the OG Marui mags 👍
-
1 hour ago, Actimus said:
The G&P 'set' that I got in place of the original/DP seems a good fit. All parts match nicely to the TM. However, its giving crazy FPS 376 average with predator gas.
Can't say what the original TM nozzle was doing to compare. Does that seem right to anyone? Stock gun, apart from the G&P nozzle & internal gubbins..
Could be lots of things, the vent size in the little rocket valve or the spring strength that holds it open can make a big difference. Either an RATech NPAS or one of the adjustable G&P valves might be the way to adjust it down again.
If you have a spare spring (or the balls!) try cutting one coil off the valve spring and see what that does! -
46 minutes ago, Colonel Kurtz said:
It's an annoying as I've rebuilt the trigger box with a good clean and relubed it. No visible wear/tear. All I can tell is the ramp on the bolt carrier resets the sear fine when racking the bolt, but not after firing.
I've tried putting a harder trigger reset spring in with no luck, as I thought perhaps if that's not resetting quick enough it might not allow the sear to reset properly
I've tried a couple different bolts and charging handles...
I'm tempted to get a GP or SP hammer assist for a bolt and see if that sorts it but I'd rather get to the bottom of it than work around it
Is the recoil spring too firm? The buffer weight too heavy? Does the bolt lock back on empty consistently?
Struggling to think why it would be behaving like this!
-
15 hours ago, Colonel Kurtz said:
Looking for advice, on semi my MWS only fires if I manually rack the bolt, the sear doesn't seem to reset from the bolt itself. Full auto is fine. So I guessing it's the sear not clicking down when it fires, is there anything I can do to resolve it?
Use some spray degreaser to clean out the trigger box then relube with light teflon spray (GT85) and see if that sorts it.
Worth checking that the ramp on the bottom of the bolt carrier is resetting the semi-sear
-
I only have a RG dump pouch (so far…although I have invested too much in other pouches to double up) but usually run RG trousers and top as it fits in most situations and camo at airsoft ranges isn’t really a benefit. Belt kit is coyote brown and an M83 Nutria brown chest rig just to mix it up 😁
-
Shooter belt finally done with the arrival of the Kydex Customs BFG holder. That is a lot of kydex on one belt 😂
Happy with the placement where the left is clear for the rifle to dangle and I can dump an empty rifle mag and pick up a fresh one as my right hand moves back round. Pistol reloads I am less worried about as it is a back up and one of the pistol pouches usually has a speedloader in to top-off the MWS magazines during a game…love the gas efficiency.
- frontsight, Wavey_Gravey and Floperator
-
2
-
1
-
Wow. Just wow.
Geoffs Super Precision 0.32g BBs are defo the fave for my MWS.
Vorsk 0.36g managed a 45mm diagonal and 936mm2 area spread over 10m
Geoffs smashed it with 5 shots in a 319mm2 box, 34mm diagonal! I re ran the test to make sure it wasn’t a fluke and got 520mm2 / 42mm. For size reference the box is about the side of the end of your thumb!
Bonus that they are a third of the price of 0.36g BBs (of any brand!)
Next test will be with the new Maple Leaf MR Silicone hop rubber, but I can’t be bothered to change it at the moment and I would probably need to push the testing out to 20 or 30m to see any appreciable difference.
Safe to say I will be grabbing some more Geoffs SP 0.32g with my next order 👍
-
-
Esstac Kywi M4 naked, ML hop rubber, MWS Nozzle spring and Geoffs BBs.
I got the Pistol Kywis a couple of weeks ago and were so impressed I have stumped up for the M4 tall versions for the back of my shooters belt. Hold the MWS gas mags really well but easy to get out and re-index.
Will be testing the Geoffs against the other BBs I have to see how they perform and then testing the top 3 with the ML rubber.
- Jacob Wright and Lozart
-
2
-
Some BB testing at 10m today, Vorsk 0.36g lead the pack and are much tighter than stock MWS on BLS BBs (according to 4uad airsofts tests)
I used two 0.1mm AEG shims to stop the hop arm moving side to side but have the stock TM rubber in there at the moment.
* 4uad tested Stock MWS 120mm diagonal group at 20m.
* My MWS (Laylax arm, Crazyjet 250mm) with Vorsk 0.36 (thanks @MAX DICKER) 45mm with a flyer at 10m so roughly 90mm at 20m!
Geoffs 0.32g coming, if anyone has a handful of Geoffs 0.36g they could bung in the post to me that would be great 😊
- Wavey_Gravey, lokkers, MAX DICKER and 1 other
-
2
-
2
-
14 hours ago, Tommikka said:
I have blown myself up more than once …… not necessarily in a game environment
I concur that the primary thought whilst pyro is hissing in your hand is to remove it from your proximity ….. and preferably before it stops hissing
Once the fuse is lit Mr Grenade is no longer your friend!
-
10 hours ago, Badgerlicious said:
New summer ghillie. Turned out so well for its first outing.
I would probably walk past you and still not see you there! Probably ruin my BDUs when you poked the Mk23 in my ribs 😂
-
Mine had wound off the hop for some reason so I had to reset between games. Accuracy out beyond 30m was a bit lacking so I might have to check the barrel is clean and the hop rubber not torn or something daft like that.
Other than that I was hitting peoples hands as they gesticulated to their team mates 😂
EDIT: cleaned barrel and still struggling to get sub 4” groups at 15m. Took out inner barrel, hop unit, inspected and reinstalled. Now sub 2” groups with Amoeba Precision 0.30g (and even better with the Guarder 0.36g!)
meh
-
-
4 hours ago, Khyber said:
I like the look of the 12 position. I tried it on my Evo and it looked quite cool. The torch was slightly visible in the sight on a riser bit nothing to worry about really nice to see a light specifically designed to be low pro for this.
I have a clone Unity riser so not an issue blocking the sight line 😂
Airsofting in the heat
in General Help
Posted
Hydration, Hydration, Hydration! (Possibly the most disturbing Phil and Kirsty spin-off!)
Spartan Woodland was bearable on Sunday. Light weight clothing, minimal load-out (I even took the AK with a high-cap incase I wanted to ditch the chest rig and GBBR mags....turned out ok) Marshal team were good at keeping the games shorter and giving a good turn-around time to re-hydrate. Cooler with ice packs for lunch and drinks was essential and worth it!
I did take some extra instant cold packs in the first aid kit incase one of the "running around wearing all the gear and only drinking Monster" crew had a "I feel a bit funny" spell but everyone was refreshingly sensible.
Remember, if you don't need to piss you aren't drinking enough!