SSPKali
-
Posts
628 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Posts posted by SSPKali
-
-
Stirling Airsoft Op ACRE at Gloucester prison. Being part of 3A and getting to clear C-wing at 2am then keep harassing the guards in the med block to disturb their sleep 😴
-
-
As Asomodai says, the FPS drop is a by product of the hopup giving more backspin to the BB (by pressing on it more)
I chronoed my Cyma AKS-74U once with the hop in full and wondered why it was only 150fps! Then I remembered I had stripped it down and the hop always gets pushed on max when reassembling! Turned it off and back to 330fps 😂
-
11 minutes ago, Joe142 said:
Amazing thank you, I’ll take the bolt apart hopefully tonight and investigate further, do you have any pics of the adjustable stop at all? If not it’s no dramas just would be good to have something for reference 😁 don’t worry if not though, wouldn’t want you to go out your way to take any 😂
The three prongs and 3 different screw holes (can see 2 in pic, at different levels) are a dead give away.
https://www.fire-support.co.uk/product/gp-marui-mws-gbb-adjustable-piston-valve
-
1 hour ago, Joe142 said:
I’ve not heard very brilliant things about angry gun but haven’t tried any of their parts personally, I’ve just been told by a few to stay clear, personally I love the g&p bolt carrier, not had any problems with it yet but as I say it does increase FPS quite considerably in my case so may need an npas to make it site legal
Awesome thank you buddy I’ll take apart the g&p and take a closer look at the parts inside, I don’t believe it has a valve stopper but I’ll take a look, can the valve stopper be adjusted to do the same job as an Npas?
The G&P adjustable stop has 3 different holes for the thin cross screw so it adjusts how far forward the valve sits and thus the power.
I was getting 180fps / 260fps / 290fps on green gas and 0.30g BBs at 18degC on the low/mid/high settings IIRC. Stock TM bolt/nozzle/etc
-
10 hours ago, Joe142 said:
Hi all, anyone run the G&P bolt carrier group? I’ve used it and love it but it’s only really good for my dmr setup I’m building as when installed I get 1.55J output, when the stock bolt is in it drops significantly to around 1/1.1J, not sure if anyone else has had that with theirs?
Also anyone got any experience with the RA tech NPAS?
Others have found that it gives higher power.
I have used a RA Tech NPAS in a TM nozzle / bolt and found it pretty good at dropping the FPS. You need the black one, as the silver (WE) one is too fat to fit.
I would check what is in the G&P nozzle to start with as they might have used the 3 position valve stopper (or get one for £9 from Firesupport) as this can be used to alter the FPS too.
9 hours ago, Jan Mulder said:hey i'm new here. does anyone have a spare bolt? for sale? Does anyone have any tips on how I can best use a mws for milsim? And do I need to bring any spare parts? I now use aeg but was still looking for more realism. I did the green gas mod. have 6 mags.
A spare nozzle and nozzle spring would be the minimum, I usually take a spare complete nozzle (easier to swap out) or complete bolt (even faster to change)
Other than that taking the AEG as insurance might be a good move. I have found the MWS to be very reliable but if you have travelled to the other end of the country and still have 23hrs of game play left if would suck to not have a rifle!
-
Turns out they are taking August off for some family time / medical reasons. My booking was missed which is why I didn’t get a notification, mistakes happen so no biggie.
Booking moved to the 12th Sept and there is a boot sale on the 11th (luckily as I have lots of stuff to move on!) so will be going to that too 👍
-
13 minutes ago, Asomodai said:
Was that from Facebook? (Don’t have FB!) Strange they sold me a ticket for the 15th then!
@shamal I am only 10mins away…takes me longer to bomb up my mags!
I’ll ping Andy an email and get it moved to the 12th Sept…and I have a tonne of stuff for the boot sale too!
Thanks all!
-
1 minute ago, Jacob Wright said:
That is gutting, a great site as well.
Did you manage to get in touch with anyone from UCAP?
I have emailed them but nothing yet, still pretty early. Hopefully I can move my booking to the next game day as it is a great site.
Book an evening game at StrikeForce CQB on Thursday as a consolation game ;)
-
-
Just turned up to the site (having booked a ticket last month) and it is all locked up and no signs of life.
I had no notification that the day was cancelled, any one know what is going on?
- Tackle and Jedi_Master
-
2
-
18 hours ago, scar527 said:
Accuracy test at 68 Meters. Just running an upgraded return spring, Omega nub and a 370mm 6.03, otherwise stock.
Nice Goruck GR1 👍
Some really good accuracy out to that range too!
-
-
22 hours ago, medellin said:
TO THOSE WHO OWN A G&P ADJUSTABLE TRIGGER
Has anyone been able to sort out the trigger reset issue on this trigger?
Mine just started acting up the other day. As others have stated previously, the trigger will fire on semi and then will get stuck in the rearward position -- not reseting forward.
Any solutions here or should I just go back to the stock trigger? Huge disappointment so far...
What lube are you using in it? Seems that they can be picky about heavier oils and greases. I use Locksmiths graphite spray (Amazon or your local locksmiths) as it is super slick and dry so doesn't pick up dirt. The other issue is that the spring tension on a lot of the trigger parts is offset to one side making the parts twist and bind, might be worth stripping down and seeing if opposite corners of any parts are showing wear (and everything is running smooth, can re-assemble with no springs to check everything plays nice with its neighbours)
-
3 minutes ago, occidio said:
I saw a review where he said that the trigger box would be worn out after some 1000 shots.
But 1 review is not the same as that it is true, so I thought I should just hear the experts in here
Probably put that many shots through it and my trigger is still ok! I can’t even think by what mechanism that might happen…but I am obviously not an “expert reviewer” ;)
-
2 hours ago, occidio said:
What are your experiences with alloy / high speed bolt carriers? and can the trigger box hold up to the extra speed?
I have the Dynamic Precision light weight bolt and it works fine in my MWS. Not sure why the trigger box might not be able to keep up? Or do you mean the bolt hold open on empty?
-
31 minutes ago, AlphaBear said:
What sort of FPS do you get with ASG ultra air? temp dependent and all that.
Std bolt and nozzle on 250mm barrel =335-340fpd on 0.20g and about 265-270fps on 0.30g at 20degC
-
1 hour ago, AlphaBear said:
That’s a good idea actually. I’ll give that a go next time I play. All my mags are gen2 and I don’t want to particularly open them up and chop the gas tube if there is no need to.
The only other thing I noticed last week was that many people were running Nuprol 3 and I was told they got better performance than running Abbey Ultra Predator. I guess that’s probably coz N3 is proper green gas whereas AUP is 144a on steroids?
I am using ASG Ultrair as it is consistent and on offer at PatrolBase. Nuprol Red is Propane with some Ethane to boost the pressure a bit (nuprol Green equates to pure Propane according to the Wiki article on the gas pressure at 20degC
Unless it is close to freezing Nuprol Red is overkill. -
25 minutes ago, AlphaBear said:
I’m just wondering if you cut down the gas tube, even in a MWS mag, would this procedure help you having to vent your mags when filling them up? In case there is an air pocket or something in the mag. Or is there some other knack we can use. Like 5 second bursts and tapping the mag a few times or do you go for a straight 20 second full burst till the gas spills out the valve?
I use 2 second fill, then do the next mag and rotate around the 5 mags until all have had a 10 second fill in total. Easily enough for 3 mags worth of BBs (either modded Gen1 or stock Gen 2 TM MWS mags)
If you over fill the mag you end up with lots of liquid in them (so lots of shots) BUT not much of a gas layer above which is what propels the BB. After a couple of shots you will need to wait for more of the liquid to boil off into gas and get up to pressure before you have enough for the next shot. Less of an issue in hot climates but for the UK it can be a pain as there isn’t much residual heat in the mag body to do this or avoid cool-down.
- AlphaBear and Hypokondrikern
-
1
-
1
-
7 hours ago, Groot said:
Unpopular opinion
The TM MP7 GBB ( despite its reduced size ) is better than the MWS.
* Easier to load mags
* High round capacity per mag
* Mags are less temperamental with filling* So darn pointy
* So pretty
* Pew pew pew KAKAKAKAKKAKAKAKA
Internals are a lot more fragile and poorly designed and executed, not the same availability of TM or after market parts for when it does break and some fundamental engineering design flaws that would have been easy to avoid. Throw in one of the most un-ergodynamic pistol grips of all time and you have a lemon.
Other than that I guess it is ok 😂
-
18 hours ago, Whisky1 said:
Hey guys, it's been a long time since I've posted anything, but thought Id ask a few questions or atleast get some opinions.
So I've had my mws for 2 years now, done so much shooting it's not even fair use at this point (50 cans of red) and it has done a metric tonne of bbs. (not really but you get my point)
I have found that my trigger has broken in and is much better then it was 2 years ago, but it's leaves me some what wanting.
Now I broke my disconnector where it engages the auto sear (around 10,000 rounds ago.) And thought I'll get round to replacing it when I change the trigger and bolt stop plate. Well that time is now as my bolt lock isn't as reliable as it should be and my trigger is failing to reset occasionally.
So my questions are what have you folks done to your trigger boxs???
Wii tech marksman sear's?
Guns modify adjustable triggers?
Lightweight bolt catch plates?
Maybe some precise fettling?
Any thoughts or experience's welcome..
Thanks guys, be lucky.
My secondhand MWS had a very hard life and there was a load of gritty mud in the trigger box that had caused a lot of wear and nasty feel.
I have replaced all the parts in the trigger box with the WiiTech parts and spring set. They are really high quality and nice finish, well worth the money.
I tried the marksman sear but got light strikes with the safety ON followed by another light strike after I took it off and pulled the trigger again! I tried it with both the TM and WiiTech parts - same result. GET THE REGULAR SEAR!
For lubrication get a small aerosol can of Graphite lock lube (less than £10 on Amazon or Ebay) and use that. Apply to the parts as you assemble the trigger box then wipe the gun down after…and don’t wear a white t-shirt! It is messy to apply and you will need to wash your hands about 8 times but it is very low friction and won’t attract dirt and gum up the action. I have had zero issues with trigger reset or bolt locking back since using it.
-
Ok, it’s official, the TM MWS has ruined AEGs for me!
Had a great day at UCAP VENDETTA running my MWS with Spitfire tracer and Vortex red dot. 2 spare mags and a 90rd speed loader for “walk back to respawn top-ups” saw me through a couple of games easy with ASG Ultrair gas and Longbow tracer 0.30g BBs.
I switched to my heavily customised Cyma MP5 for exactly one game…feel was “off” and zero feedback on taking a shot. Accuracy was ok for CQB but not on the long open stretches outside. Seemed to burn through ammo to try and compensate. I’ll keep it for really close in stuff like StrikeForce and Bristol Courthouse.
Went back to the MWS and even got a guy 45m away hiding behind a trailer, only his feet and lower shins showing 😁
We won’t mention the shot from 5m back, through a 10cm hole in a door into the marshals crotch 🥺 TBF there was a blue hiding behind it and taunting us!
-
My two big ones are cut out processed carbs (white bread, pasta, rice…) and switch to low/no alcohol beer (BrewDog Nanny State or Punk AF, BigDropBrewing Galaxy Milk Stout are all great!) to save a bunch of calories but still taste great.
Doing some short jogs and cycling to work a few days a week certainly adds up and burns off more and I certainly feel better mentally for it. Jogging with a set of weighted plates ups the burn and good practice for running a GBBR with 6 mags!
-
Marking kit
in Guns, Gear & Loadouts
Posted
Baby blue paintpen on mags and rifle,
BFGs are engraved. Plus I have enough pics and details of internal upgrades to back it up 😁