[Action Army's new pistol (AAP01)]

On 03/01/2020 at 13:32, EDcase said:

Not for me either but I don't hate it so maybe in the future I may change my mind.

You can see its a newer version of the Ruger IV

Also looks like an updated Luger.

Ruger actually based the grip angle of their .22 automatic on the Luger due to the excellent ergonomics.

[THE TM MWS thread]

22 hours ago, camden said:

Has anyone installed this ambi selector:  http://www.wiitech.com.hk/product-detail.shtml?product_id=539&path=57_145

I am a lefty and would quite like to go 'safe' without moving my shooting hand too much. I have the CQBR lower (probably exactly the same as the M4A1 lower?)

 

I fitted the AngryGun one as I shoot left handed as well, was a pretty simple job and seems to work fine.

 

There are some good vids on YouTube showing how to do it. Eagle6 is my go-to.

 

I also added a larger bolt release so I can manipulate it with my left hand after putting a fresh mag in with my right.

[THE TM MWS thread]

8 hours ago, Wo1f said:

Mine ran great at the night game on Saturday. 4 degrees and briefly snowing ran on propane topped up with some Mapp gas. 

 

The modify tan does seem to wear down quicker, but the results are great. I think I’ll get the other modify bucking and run some tests. I’ll post up what results I get. 

@wo1f can I ask what Propane adaptor you are using? Any changes to the mag fill valves? 

 

TIA

[THE TM MWS thread]

3 hours ago, RossF said:

Hilarious. You’re not the only one. I tried silent fill, and I tried the laylax fill valves etc then I just decided to use Abbey Vertex gas instead. It’s just not worth the hassle, these mags just don’t seem to like propane for some people. 

Glad it isn't just me! I think I will return the Laylax valves for a refund then. Glad I have not invested in a 6kg propane cylinder to re-fill from!

 

So, where does Abbey gas in bulk? I am in Gloucester but play in Bristol and Birmingham....would be good to grab a box of 12 cans at a discount!

[THE TM MWS thread]

6 minutes ago, Yukarin said:

I have this issue and am still yet to find a solution. Though the madbull one works better for me than the AI nozzle.

I have ordered some 9Ball fill valves to give them a go.

 

Failing that I will get a genuine Madbull propane adaptor.

 

....or just buy shares in Nuprol Green Gas!!!

[THE TM MWS thread]

Soooo I have major issues trying to fill my MWS mags with Propane (and to a lesser extent my MP7 mags too!)

 

Using regular cans of Nuprol green and red gas is no issue, they fill fine and only spray a little liquid when full.

 

I have a Madbull-type adaptor for my Coleman propane and it tends to get a little in the mag but mainly spray liquid propane over my hands. I purchased the Airsoft Innovations adaptor and have tried that without the extra adaptor (fail) and with (slightly better but still more into the atmosphere than the mag!)

 

I fitted one of the Lees Precision silent fill o-rings (please don't derail, I know the TM thinking behind the valves) and it silently fills with Nuprol gas...but still pisses propane out of the two adaptors!

 

Do I have a dodgy Coleman tank? Are these adaptors inherently hit-or-miss? Is there an issue with the fill valves on the mags? Please, any advice is very welcome!

[THE TM MWS thread]

23 hours ago, Yukarin said:

I've ordered both 8mm and 10mm M3 screws, will update the thread to see what happens. Would prefer to sort this issue out without using loctite as I need the adjustability of the MPA.

Use some low strength threadlock and it should adjust ok, but not vibrate loose.

[THE TM MWS thread]

1 hour ago, RobHedley said:

 

Very nice Rifle and you will love the red dot. So quick to aquire a target. Remember to keep both eyes open instead of using it like a scope (not wanting to teach you how to suck eggs as you may already know. There are quite a few people that use it like a rifle scope) 👍

I have been using the Vortex on my G&P and Cyma AK74 for a while, got used to both eyes open!

[THE TM MWS thread]

Hi all,

At last I have managed to register for the forum and stop lurking reading all 90+ pages of (mainly) wisdom.

A big thanks to BadaBing / Wolf, @ATRG_ and Stu (@BeefyMilsim) for getting me hooked on the MWS platform and Beefy for selling me his CQBR

I am yet to field it due to a torn knee ligament but I have had fun tweaking it and making it ready. As I run a G&P M4 AEG I knew what lay out I wanted and it is almost there (my wallet can breathe a sigh of relief now!)

 

Magpul pistol grip (ERG? Too many TLAs in their product range!)

Magpul AFG

Ladder RIS covers

DP light weight bolt

RA Tech NPAS (Silver one, needed some fettling to fit)

DP nozzle spring set

DP Nozzle seal cup

Modify Tan and Laylax hop arm (already fitted when I got it)

Ambi safety (I shoot left handed as my right eye is Mr Magoo standard!)

Magpul grips on mags (5 so far, I am not too trigger happy!)

 

On Order:

Extended mag release

Extended bolt release (again, for lefty use)

Angry Gun Speed Buffer weight

Angry Gun nozzle with MPA

PTS QD sling plate

 

I then have the parts to re-build the original BCG as a spare. Not sure I need a spare but for weekenders / milsim I would be happy to throw it in the case.

 

Topped off with Vortex red dot and PEQ / Olight Valkyrie for light and "lazers" I might try and find a way to cram the X301 tracer into the can, that might be a good weekend project! Only other possible upgrade is a Magpul CTR stock but I am finding the current one ok.

 

Good news is the knee is almost healed so I can play again and try to get some fitness back!