Leaderboard

Yeah, I got a gearbox for my HoneyBadger from them, only issue was customs opened the package & managed to replace the tan pistol grip with a feckin scented candle.

pfft, real pro's put it back together with more screws than came out of it during dissassembly

Sorry for the double post, but the timing worked out this way. I know it isn't period accurate for all you stitch counters, but new harness arrived for my Vietnam belt kit and it was £12 well spent. The period accurate one is simply not made for 6'5 individuals. Even at the max setting it was just too short and held the belt up too high. This new one is longer and actually fits me comfortably, keeping the belt where it should be. Also I added a knife sheath because knife kills are always amusing. Fits everything I need for a good time hunting GIs with their own kit

Went to South Coast CQB for the first time in about 8 years yesterday! Overall a good day, but.... Marshalling was pretty woeful, several times the two marshals assigned to our side spent the entire game sat at spawn pissing about with their phones. The other two seemed to be a bit more on the ball so there's that. Lots of whingeing about hit taking but personally I didn't see a problem. I think there's a lot of people whose guns aren't as good as they think they are! The site is a LOT smaller than the last time I went. The whole back half of the site has been fenced off by the landowner (presumably because the buildings are less fucked and able to be rented out). Teams were massively unbalanced and there was no attempt to address it. We got our shit pushed in and spent most of the day within about 100yds of our spawn point (that's on us, I am aware). On the plus side, my SCAR full of @ak2m4's upgrade bits performed excellently, although my MP9 managed to get a BB stuck under the nozzle and went through a kinetic disassembly. Good day overall, not in a massive rush to go back though. There's other sites that are the same/less distance that I'd rather spend my time at.

It's not even straight...

First ever time playing on a Saturday Which was a great idea, as it allowed me a Sunday to do house renovations, whilst aching!

genuine Troy Ind , AEG fitment 🤔

So...after three different outfits, light grey, dark grey and bronzed black, I gave up and went mainstream..... It's not much to shout about but 1.1j and not too bad to look at now.. 😁 Cheers for the ideas. 👍😁

Lol An elderly man rear-ended a guy driving an expensive European sports car. Enraged, the guy hops out and confronts the old man. He yells, "Look what you did to my car! You're going to give me $10,000 right now or I'm going to beat you to a pulp!" "Oh my…" the old man said nervously. "I don't have that kind of money. Let me call my son.” he said with hope. “He trains dolphins and he will know what to do." "Dolphins!" the other driver huffed, while rolling his eyes. The old man pulled out his phone, dialed his son, and just as his son answered, the irate man snatched the phone away from the old man. "So, YOU'RE a dolphin trainer, huh?” The irate man yelled, “Well, your old man here just rear-ended my car and I need TEN GRAND right now, or I'm going to beat you AND your old man to a pulp!" "I'll be there in 10 minutes." says the voice calmly on the other end. Exactly 10 minutes later, a Jeep pulls up and a guy hops out and proceeds to pulverize the bully, leaving him in a heap on the side of the road. When he finished, he walked over to his father and said, "For the last time dad, I train Seals… Navy Seals. NOT dolphins!”

https://www.ebay.co.uk/itm/184417993754

Just for clarity it’s the finest Chinese LLM money can buy 👍🏻

If there's no screws left over at the end 👍 If there's screws left over but it goes pew 👍

When me and my brother first started Airsoft I bought a Classic Army M4, and he had a G&G. My rifle would only feed from Classic Army magazines, and his G&G.. and a single Nuprol PMAG. I think it's really hit and miss as I know other people have said their rifles will feed from any magazine! So I'd say buy a few different types and see what feeds best. Failing that buy a TM Recoil and never look back .. 😂

Obviously to pay for the laser engraving they had done....

So a while ago I started to build a hk21e machinegun based on a jg g3 but the gun was a bit screwed and I made a bit of a hash of upgrading it so That rather killed my motivation for working on that. I recently sold off that gun as part of my process of swapping entirely to gbbrs. Having watched a few explosive enterprises vids I decided to give this another go. This time the base gun is a we gbb g3. It came to me with the barrel shortened and Ive just picked up a proper hk21e style clubfoot stock for it. Im planning to model and print most of the bits for it in plastic and then send them off to be done in aluminium when im finished. This is just the first step. 1 new sight block that just sits on the cocking tube and dosent go down to the barrel. 2 front handguard cap with a block hidden under it which bolts to the handguard pinhole to keep everything rigid 3 a sleeve to go over the barrel to give it the proper machinegun profile. I have sanded and painted this bit since the proper barrel is tapered and making one of these in metal would be a pain. will probably leave it plastic. It just screws onto the outer barrel nut and gets pinned in place by the flash hider. next up is to make the rear handguard cap and order some steel or aluminium tube to make the actual handguard. Ill be building a pinhole into the rear handguard cap where the belt feed mechanism attaches. This would normally be on the reciever instead of the magwell but Im trying to make this in a way which requires as little modification to the base gun as possible. Once the belt feed assembly is made ill be making a box mag to slot onto it, fitting the guts of a 249 box in there, hpa tapping the original mag and drilling a hole in the front for bbs to feed in from a spring tube. Im not really a fan of hpa but for a gbb lmg like this its simply the best option.

Have you tried it on a different battery ? The exsting one, could possibly be losing power under load. G&G are usually pretty solid, but dud's can always happen. I'd try a different battery , if that still doesn't work then send it back again.

Yup, ordered the gearbox & a tan grip for my HB, was a bit confused by the candle. after a few emails/messages to sixmm & a trawl of their website (no candles for sale) I concluded that customs mucked it up when checking the contents. I assumed someone's Grannie got a pistol grip for Xmas, hope they wanted a tan one.

The optic had scuffed the paint slightly, but yeah I was also a little shocked that a big company like patrol base would pull something sleezy. Although if they did refund, I’d of ended up getting another one anyway so 😂

Sweet think that’s convinced me 😅 as long as I’m covered if I get a lemon 🍋

Many orders , no complaints

I'm assuming you mean the Umarex one? I absolutely adore mine, after Patrol Base fixed the lemon I received from them. So far all I've done to it is fitted a gate titan (Mostly for the 30 round mag lock, no firing without mag inserted and bolt press to "load" it) and it's been an absolute workhorse. It hasn't needed anything doing to it. I have 0 regrets about buying one, personally.

M90 is nice, but 4th for me is AUSCAM 😂 Although, really... Anything that isn't multicam 😂

Yes I agree it's not feasible with my setup. I think the chrono is wrong. I do remember couple of years ago it was around 30 rps.

I think your chrono is telling fibs. Even if you didn't suffer from mech issues, your still going need a motor with a no load speed north of 60k

That right there is a dangerous assumption to make. It'll be set up adequately at best.

Another possibly obvious question - noting that the gun contains a mosfet, there may well be a drain on the battery when it is connected. Are you leaving the battery in it, and connected? If you have done that, even for a few days, it is possible that you have drained the lipo to a voltage that has caused damage to the battery - i.e. it won't really take charge any more. When you buy a replacement battery, as per the suggestions above (i have found Turnigy batteries, purchased from Hobbyking good and super cheap), ensure that you never store the battery connected, and ideally store the battery at a 2/3rds charge (a so called 'storage charge' if you aren't using it for a month or so,

Welcome to self teching! Clean out all the shit grease that came in it from the factory and relube it with some half decent stuff. Not loads either. Shimming from the factory will be the absolute bare minimum. Do it properly and it'll run smoother, be quieter and last longer.

Bloody hell! Another skill I'm going to have to do to a half decent standard! lol

WTF is an acronym

To be fair, I think the site is only about 100 yards across That sucks though, unbalanced teams sometimes happens, but no attempts to fix it is poor management. And shame about the hit callers. 95% of the time they aren't hitting a damn thing, but they're always so sure they are.

Just to be clear, I don't mean the entire setup, just the suspenders! And sorry, I lied. £14. Still, it's a great price. Alice kit tends to be pretty cheap and I love it. https://www.military1st.co.uk/13501001-mil-tec-us-lc2-suspenders-olive.html

£12 Wow!

I’ve got a genuine LLM only cost me 40 quid haha. I admire the balls of it though, question is is it a genuine mistake or deliberate?

3 out of 4 of my favourite camos all in one pic 😂

To throw something else cheap into the mix. I've got a Redwin Torero 1-6x24 and the glass quality is very similar to, if not better than (imo), the VisionKing 1.25-5x. It's $103 (right now on their own site) with a one-piece mount and you can pick from two different reticule choices. I haven't actually used the optic in anger yet as I still haven't finished my DMR build in favour of turning around some boneyard items... 5 months ago. I should really get on that.

A man is walking through the woods when he sees a bear charging at him. He knows he can't outrun a bear for long, so he starts praying, "Dear Lord, I beseech thee. Please, o Lord, please let this bear be a Christian!" The bear catches up to him, knocks him down on the ground, then gets on its knees and says, "Dear Lord, thank you for this food I am about to receive.

This whole package was up for sale a few months back.

Try using a 7.4v lipo.

Sounds like a battery problem but its shocking to me that an AEG would need so much power without a heavy recoil system. And for that price.... 😲

I've recently got a G&G GC16 and had just had a similar issue. I was given an 800mAh 11.1v 20c battery with it, which is very close to the recommended spec but put it in this morning, after having a fiddle with the stock, and got the two beeps. In this case I had pulled the battery wire and separated the 2 small spade connectors that go from the etu/mosfet into the rif. Reconnected and it fired once then just went dead. Swapped it for a Li Ion 7.4v 2500mAh 30c and its fine again. Luke/Negative Airsoft said on one of his videos a while that the etu/mosfet is a pile of poo and should be replaced but it seems to be fine on 7.4s. I just plugged in the 11.1v to check and it works fine!!!!! EDIT: fired a load of shots with the 7.4 and plugged the 11.1 back in and got nothing! Not even a beep! Got on the balance charger now.

what gun? what battery? what charger? btw at 11.1V it is not fully charged, it should be closer to 12.6V when full

New 'inexpensive' DMR build. Base gun is a polymer GE 417, for weight and low price. Out of the box it was pretty horrid , but tbf for what it cost I wasn't expecting much. Gearbox is a long V2 with a mosfet and some sort of electronic full auto set up, no COL and a micro switch whitch enables full auto. I'm not realy a fan of mosfets as I see it as adding unnecisary electronic crap, ( and I'm normally running GBBR) but I'll concede that the lack of COL is handy in a semi locked pew. I've replaced the piston head and added a slightly longer double o ring nozzle, compression is now awesome. Switched to a ZCI rotary hop and inner barrel, along with a M/L rubber and Omega nub. Also a high torque motor. Now running at 1.78j on my home chrono on .36BBs. Quick blow over with Halfords paint to make it look a bit less plastic and added a few spare decals I had. It'll get a run out next game to shake it down, but happy with that.

I wish I had a chance to look through them both, but the only place near me that sells optics is a real gun shop and their optics are a bit too pricey for what I'm looking for. I've heard good things about both Visionking and Vector Optics stuff, which is part of the reason I've looked at them. Honestly, the main reason I don't want to go Vortex is the price; the LPVOs that Vortex offer with a reticle that I like are £500 £330 at the cheapest with the new Venom series, which I think is still just about too much for me to spend on this one, and the larger scopes with the same requirements are outside my price range as well. Reticle type is very important for me, as I enjoy long distance airsoft archery, and a good reticle can really help if you set your gun up and know exactly where on the reticle you need to aim to hit those longer shots. Unfortunately, those ones listed don't quite meet the requirements I need. The Nikko 1-4x24 is close, but I don't like the reticle Hard requirements for me are: - Reticle I can use for longer shot archery - 1x minimum variable optic, as I will be taking this to CQB (because I'm crazy) as well as using it for woodland - Illuminated reticle as I will be taking it to night games as well (ties into why I also want 1x minimum) - LPVO aesthetic. I don't want a mid or long range looking optic as it would look a bit weird on this build - Low scope rings Maximum magnification isn't too much of an issue. I'd be okay with 4x, but ideally 6x or 8x as a maximum as I like to use my optics to spot targets and radio movements to my team. Doubt I'd be actually shooting with more than 4x or 5x. It's funny to me to think that my hard list of requirements is so strict on a gun that I won't actually be using all that much, but I think that's actually why. It's a backup gun that I will be using for times when my main guns are either not viable options or something has gone wrong. It's also why I don't want to spend too much and honestly I think that reason alone is why the Visionking one has been the front runner for me for so long. It's not that expensive and does everything I need it to.

It's still live, but the piss taking speedwanker (or "Seller" as commonly known) has closed the advert to further questions and removed any that have been asked so far. On another note, I wouldn't care if it lobbed 1000bbs a second, was made of solid platinum and came with a cheque for £500, no hi capa, especially not one that looks like it's been polished up with a headless smurf carcase is worth that!

Make's a mental note to avoid wolfarmories for a while.

A teacher trying to teach good manners, asked her students the following question: 'Michael, if you were on a date having dinner with a nice young lady, how would you tell her that you have to go to the bathroom? 'Michael said: 'Just a minute I have to go pee.' The teacher responded by saying: 'That would be rude and impolite. What about you Sherman, how would you say it?' Sherman said: 'I am sorry, but I really need to go to the bathroom. I'll be right back.' 'That's better, but it's still not very nice to say the word bathroom at the dinner table. And you, little Johnny, can you use your brain for once and show us your good manners?' Johnny said 'I would say: Darling, may I please be excused for a moment? I have to shake hands with a very dear friend of mine, whom I hope to introduce you to after dinner.' The teacher fainted

It's completely not what you are looking for but the pattern 58 pouches are perfect....