Leaderboard

Not me, the wizard @Anonymoose again. He worked some of his spellcraft yesterday, started by trimming down the side locating tabs on 2 different AR AEG outer barrels that weren't quite compatible with the 2 upper receivers in question (noq sit in beautifully), then also fixed some of china's mistakes and drilled some new holes in a QD attachment lever for a PTS Unity Aimpoint micro mount. The big job was converting this real Geissele bolt catch to fit on to an AEG lower (and obviously not protrude inside so there's room for the gearbox). There were MANY steps to this, far more than I've shown, and he also made a custom little piece to sit inside and secure the lever, since a real one would have its' internal segment and a bolt carrier holding it in place.

Hey Josh, time for a claim I think, but the tech/shop ?, need to initiate it as it appears to have happened on the return journey to you ?.

"Made" a locking pin to lock my SCAR-H MK20 to semi-only for DMR use. Very basic; drilled and tapped the selector cam and used a machined bolt to hit that rear pin in semi so the selector can't turn any further. Gonna take it to RIFT tomorrow and hopefully get some kills in with it.

Not so much an airsoft day but more of a nearly finished building our own private killhouse ? Nearly a years hard graft has gone into building our own private killhouse between 5 of us with some help from others, rain, snow and the cold we put this up by ourselves Looking forward to running the beta test day next Sunday the 27th

That's a great price. I've heard good things about them

I just did about 15mins ago?? £135 delivered for a Cyma M14 can't be bad

Pre “bubble bursting” pricing here Ive seen these change hands for circa £500 for a similar package Must be the “it’s just not selling” price to tell his other half he’s trying!

it's pot metal, either snap it off with a pair. of pliers or use a dremel

Skirmish Wycombe was quite good last time I went. Have a look here: https://playairsoft.uk/map

I like RIFT Redcon. I was there today, and it was good. (as usual) While i haven't been i'm told Skirmish Wycombe is also good.

I hate to play againts these paintball based players with their modifyed hpa pistols. Where I live sites are too small and full of these players. and I am there with my MWS setup 8 mags 10kg gear in total try to out run these players. Seems like they got unlimited ammo meanwhile I count every shot... Please can someone suggest me a good Mil-sim site around South buckinghamshire/Oxfordshire

I have an MP5 NGRS but the front space looks much the same. I use these, but you could probably get something slightly larger in: https://www.vapextech.co.uk/airsoft-7-4v-1300mah-25c-lipo-cranstock-battery-with-case-lp302-vapextech

I couldn't resist.

I didn't get out of the safe zone today at Worthing Airsoft. The rifle that I let my friend borrow was... really dirty as it turns out. Took it on the range and my shots were going everywhere, so I had to take it apart, give the hop rubber and barrel a good clean and make sure the grub screws that held the barrel in were nice and tight as they were loose and the barrel was moving. Once I did all of that, got it properly set up and chrono'd, it was basically lunch time and I couldn't be bothered to get all my kit out to go and play for the afternoon, however it was shooting really nicely again once I did all that; though it was hard to properly zero because it was quite breezy today. Also, my newly upgraded, but very old Bell 1911 worked really well with the new upgrades, though with how cold it was this morning it struggled to get through a magazine with that tiny gas reservoir...

Not sure if these need 7.4v or 11.1v (I'd always go for 7.4v to be safe but someone will confirm) I'd suggest something like: https://www.vapextech.co.uk/airsoft-7-4v-2600mah-25c-lipo-cranstock-battery-with-case-lp305-vapextech The Milliampere Hours (mah) determines how much total power a battery holds (ie how long it will last) The C rating determines how much power it can deliver per trigger pull (20c is the lowest and 30c is usually the highest you can get) Remember you will need a GOOD intelligent charger to take care of these batteries and prevent fire. This is the cheapest I can find with a quick search. https://hobbyking.com/en_us/turnigy-accucell-us-plug-c150-ac-dc-10a-150w-smart-balance-charger.html

Also to reiterate what Rogerborg said: If you leave something in your basket for over 24hrs they usually offer you a discount.

I definitely had the wrong WE adapter version though, someone else with a WE XM177 was having hop issues but otherwise running flawlessly, but their (newer gen) airtac adapter was running on 120psi. Mine has to run on 180 to cycle.

It's worth noting that he does sell these as part of his job, with anything of a 'first batch' nature the usual argument of 'he wouldn't sell it if it sucked' doesn't really hold up unfortunately, so perhaps a pinch of salt is advised. I'm still planning to get their PP19 when it comes out, but I haven't really seen enough yet to say enough about wellpro's capability aside from the teething issues that have been brought up like double feeding

Use code EGGS10 to get 10% off everything, today (Easter Sunday) and tomorrow only. <sweating-guy.gif>

Yeah, first time I did it, I panicked as I thought I’d really f*cked it. I couldn’t get the sear back in with my bare hands ? luckily I buy so much shadowfoam I had a pair of forceps to hand and managed to jiggle it in using them. No idea how you get it in barehanded.

Hello Mark! Yes mate I think you are right. I have emailed the retailer, email response time from them varies but will see what they say. Although, I believe PF make it pretty much impossible to claim for RIFS? They also sent it PF 24 although...that's another story. First, they tried delivery and no one was in, fair enough they take it to a post office...the post office that is 20 minutes away, rather than the one that is 2 minutes away. Ok fine, but when picking it up - sorry no can doosy. The PO refused to release it saying that the name on the parcel was wrong, even though I had the slip. Ok will email PF, which I did and after countless daft responses (in one of them they said the name wasn't wrong but the address was!) I got nowhere really and arranged for a re delivery on a Monday when the wife would be home. Instead they try delivering it on the Tuesday when no one is in. Retailer said they have no control over redelivery, but I rearrange it again for Saturday, which they did, but delivered it with the box in two and damage to the RIF...too much time in transit I think. I have emailed the retailer since with questions and pictures and the video so will see what happens... Cheers

According to the troubleshooting guide, a green flashing light means that either the motor is disconnected or the brushes are worn out.

Nice one. That was good to watch to see how you did the sear/spring part in the rear chassis and the main trigger spring at the front. Fitted all the Guarder parts a week or two ago - everything very easy aside from those two stages of rebuild that required MUCH patience!

I’ve never had any issues with them. I’ve used them for many purchases and usually their items are well priced. And it helps if you know what you are after. Always shop about, ask questions first if unsure of anything.

Crack, he's smoking crack...... but it does seem to be the pure stuff

Wrong stock, pistol grip and magnifier but it's a work in progress of the new Royal Marine MCX in 300 Blackout. Based on a VFC.

Second half of the gen5 disassembly video

When I bought my NGRS MP5A5 they were the cheapest retailer too - and delivered within 24 hours at no extra cost. From my experience, it will be a shame to see them go.

Is the view that it's fucking stupid to leave your guns in a car? Yeah, that's ALWAYS been a dumb move but people never learn

Tbh most BBs are decent nowadays. You don't see much of those old 0.12g or 0.2g bags with bubbles in them anymore, at least in reputable stores and sites. I think it is harder to find a bad bag than a good one now.

I use BLS or geoffs, never had any problems

Sure, if you know what you're after, they're fine. Especially when you factor in free postage, and that if you leave it in your basket for 24 hours, you're likely to receive a discount offer.

Felt like a proper summers day today Out with a mix of DNC under RG rig With Desert Tiger Stripe Certainly stood apart from the normal MTP crowd

Lct VSS

You could try big Steve’s builds? He’s based around Dorset/Hampshire way. He’s very good with GBB - not sure about AEG though.

I was at Skirmish Wycombe today?

Never got to leave the safezone today - what I predicted months ago for the T8 'mws' hpa adapter happened, and the double stack jammed every single time (so me and a friend are now going to fashion a single stack collar for it) so that was the DE out of action. WE M4 was having air problems yet again, but have now isolated that to the adaptor as well. Pistols didn't fair much better, feed lips snapped on one pistol, nozzle return spring broke on another. Was nice and sunny though ?