Leaderboard

Holosun works but it doesn’t work , 😂 Dbal works but it doesn’t work , 😂 had a lot of bb’s through it but it hasn’t had a lot of bb’s through it , 😂

If you did have a mosfet, you probably do not anymore.

It's not the size, it's what you do with it? Or something like that? So they say? Possibly? I mean, I think, not that it applies to me, you know, kind of, sort of, perhaps. 👀

If you have been, are going to, or are threatened with having to go to Stoke on Trent, you have plenty of reasons to moan. Even the vague reminiscences about Stoke that this thread has bought on have made me monumentally bad tempered. As for round seals, buy a selection of thicknesses of Viton from eBay and get a set of punches. I'm making Brembo F08 calliper seals tomorrow.

I tell the wife that a LOT. LOL.

Been to that Fort when I was little (my dad was from there). Used to sneak out into the estuary with him and my brother to go camping on the medway forts (Darnet & Hoo) which was a bit naughty even in the 80's. Sailing out on an overloaded, puncture ridden Avon rubber dinghy with a clapped out 4hp Johnson outboard motor, that I don't remember ever making a journey of any length without breaking down no matter how much he tested it in a bucket the day before. Fun times. 🤣

I know the feeling as I always use single shot even with an AEG and Hi-Cap. (I tend to die when moving up so needs good co-ordination and suppression from fellow players to work) I may give my GBBR a go when I can get enough mags. (Though my main at the moment is a Lonex BAW 😍 which kicks as much as any of my GBBRs)

And yet it actually isn't . You adapt your play style and it's so satisfying when you take some spray and prey wanker out with a double tap 🤣

So 150 shots maximum before you have to stop and reload mags 😁 Its going to be tough going up against AEGs and HPA with hi-caps at 20+ rps 😬 Eh? With a GBBR that's the ONLY way to play 🙄 Gunman FilmSim days have single shot rules and ammo restrictions of 600 BB's for general players. (Other rules for machine gunners, snipers etc) I'm tempted to take a GBBR to one of those games.

Just less spray & pray. I'm 6'4" & just as wide... they'll know where I am anyway. Got 5 for each GBBR & a million hicaps for my AEG's. And an odin with adaptor for my XM177 mags, & normal speed loader for my Scar mags & pistol mags.

1. Any 10 quid speed loader does the same job to be honest. Ofc you can spend money on Odin and Odin adapters if you want to. 2. Acetech innovated and innovates constantly on tracers so I'd say yes. 3. Feyachi plus a cap from reddotengineering should be more than enough for now. Later on you can spend decent amount of money on either Vortex or Holy Warrior if you fancy Eotech replicas. 4. No clue I don't use iron. 5. Mine never fogged up those lenses are simply the best out there but you can run an exfog unit on it if you're dead set on i5. Cheek weld is gonna rubbish though so you need some kind of riser for optics more than likely. 6. If anyone did a threaded outer barrel for it it shouldn't be a problem to put one on. That PX4 is quite niche it's not like a Glock or Hi-Capa or other very popular models.

Stay low and get as close as you can.

2. Tracer Unit's are much brighter these days. Go with a new one. 5. Anything will fog up with someone determined enough, but it's probably a good choice. 6. The issue is finding a threaded barrel. Detonator made one but they are long discontinued and very expensive. Due to the rotating nature of the barrel it's not the greatest platform to run a silencer either. Use a different pistol.

I was there recently :(. It is a deeply depressing place and a classic example of how successive governments have failed to react to the loss of traditional industries.

Coming soon to a TV near you...

Yes, postage may not be "free" but its still £4 cheaper than buying direct! because it's my damn right to moan! I'm British!

I have been out to the forts and to the wrecked U Boat; I stayed overnight on Grain Tower a few years ago as well. I sometimes go down there for work.

Try not to loose a magazine, they are bloody expensive.

No one by choice, but to be fair it did used to have a great site at Ft Amherst, sadly missed 😢

and tbf, if there's any valid reason to use .12's, it's in a grenade. no better use for the fired/dirty/crap ammo that you wouldn't want to put through a pew.

Yes, it's really hard to get it back tho, so I normally get another one already filled with smoke Omg. Airsoft eh? Make it your avatar pic You can probably thank TM for the polarity issue...

I'm pretty sure this was up last week for 100 quid more??

So this would be the problem. Don’t think to

Conserve ammo? Are you crazy? That's not a tip, that's a bad idea!

Take gas!

Hey, it's a grenade. Lol

What's the SHS motor out of interest? Be careful with that Adaptive AB setting and 11.1v, can easily spanner a motor. As Loz says try with a 7.4 and well worth getting a basic soldering kit for the battery connector conversion.

The reason why the Dyes might be better than the Bolle is the Dual Pane lens. Which goes some way to negate fog. Truth is if you are a sweaty bastard naturally there is very little you can do unless you keep moving, use anti fog or get some decent fan based goggles that are powerful enough.

Yes, the Lynx, no gasket, mostly with the smoke lense, but have used the orange HDL lense in underground bunker CQB where it was dark and have had success with both lenses. They wrap around the eyes nicely and Bloc do a number of different ones that might suit you more if needed. You can also get prescription lenses put in them as well.

Everything i own uses 0.28's. Except the grenade. that gets filled up with the leftovers bottle. Which includes 0.12's!!

Then I would say use what you already have, set the hop and see if it's good enough. Don't worry about what other people use because it may well not work the same for you.

What pistol? Is it stock? Does it hop well? All these things have more effect than purely the BB weight and where you play. Personally, I use 0.28 in my pistol because that's what I have in my AEGs (mostly). My TM HK45 with a crazy jet barrel and Maple Leaf hop flings them with remarkable range and accuracy. My standard M9A1 that I haven't even set the hop in yet....not so much.

Do you, or did you , have a MOSFET? If you did it's likely the source of the smoke.

Soldering iron... Antex hp80 is no good for electronics but great for connectors it's a bit large for small things. If you need something for both there's loads of choice, but for connectors you need a larger heat source, not watts but physically large bit. If the bit is large around 6mm you won't need more than 40W. If it's small 3 or 4mm you might need 60 or 80. The Amazon temp controlled for about 15 quid aren't temp controlled, but they do control the power. I have one and it's ok, but you need to use the largest bit and turn the temp up. I have a 55something clone from patrolbase, it's satisfactory.

If it worked for you might as well stick with it, but a lot of people like the Odin speed loaders, may be worth a look. I've got the "AceTech Brighter C" and cannot recommend it enough. Depends on what you want to spend, Nuprol ones do the job, but if you want something a bit more cheeky, the Vortex range is a good go-to. Not my cup of tea due to restrictions on peripheral vision and claustrophobic feel. I use "Bloc Tactical" EyePro and they are fantastic, never fog up, are literally bulletproof, and have interchangeable lenses for different environments. A lot of this is preference more than anything, but hope this helps. I might have to get back down to z-mart again, was a laugh last time!

I'm going to take a guess and say that you might have got an adapter wired up for RC cars, which will be reversed. I've had them myself, but caught it beforehand luckily, and seen plenty of people caught out by this. IIRC, the larger sized contact on the deans should go to the round contact on the mini Tamiya. Can you post a photo to confirm? Also, put the affected batteries outside somewhere safe! I believe the correct protocol is to cut off the contacts (one wire at a time) and then put it in a bucket of saltwater, but others can confirm.

That's a bit of a slant on the old "Is that a gun in your pocket,or are you just pleased to see me" gag. "Is that a gun in your sleeping bag or are you REALLY pleased to see me?" I'm beginning to worry about you😂😂

I went to my first ballet the other night and saw women dancing on tiptoe . Why don’t they just get taller girls ?

I know they'll blame the Post Office but retailers really are ripping us off on postage! £7 postage on a £4 part! And they wonder why we go straight to eBay!

The other day my wife asked me why I carry a gun around the house, I looked at her and said "Decepticons!" She laughed , I laughed , the toaster laughed, I shot the toaster... It was a good time!

What’s got two I’s and smokes? Pompeii

Lost three tiles in the storm last night, gonna play scrabble inside from now on.

I mostly go on my own too - agreed that at first i felt a bit uncomfortable as it seems everyone else is in big crowds of mates - but the reality is there are lots of others like us, quietly getting on with sorting our kit in the corner. And if you are so inclined, without fail, I've always found people will strike up a conversation at the slightest opportunity - ultimately you automatically have rather a lot of common ground with everyone else there! Also - agreed - DPM (and, similarly, Multicam Tropic) is beyond effective with Rhododendron! It was of course designed for a dense woodland environment of central Europe. Multicam/MTP is very effective, but ultimately a bit of a compromise, and is a touch too light in heavy cover (whereas DPM sticks out as a dark blob in open ground or very light cover).

never seen this video before, crazy detail for anyone looking to shim a box. Thanks!

Good point, well presented. Does it do it with a 7.4v battery?

The concept of a red dot on this thing is like putting a bipod on a tank. 🤣 It looks mean tho!

top top mofo always worth shooting him a pm on here or FB down to earth bloke with down to earth prices - yet shipping is bloody quick without silly postage costs already covered: http://www.airsoft-forums.co.uk/index.php/topic/20130-wwwak2m4couk/#entry138973 but well respected on here (if that don't get a super duper grovelling bonus loyalty discount then I don't know what will )