Leaderboard

Not to be 'that guy'... while absolutely being 'that guy'. It's also a breach of the forum's classifieds rules. '7. You must include a picture of every item that you are selling. It is not acceptable to just show a box or use a stock images. Pictures must be visible in the listing (whilst we do allow links to other forums, simply placing a link instead of a picture is not permitted).' While aware the rules can be an inconvenience, they exist for a reason.

To play devil's advocate to your devils advocate (does that make it a double or anti devil?) The ad has been up for a fair while, it doesnt take 15 hours to take a couple of snaps on a mobile and upload them. I'm not saying the gun he's selling is actually in bad condition or anything, i'm saying thats the reasonable and safe assumption people are going to quickly draw from that ad not having proper pics. Which for a £550 price tag is gonna be more risk than most are gonna accept.

Sure. You just drill and thread the valve for m4 set screw. It works as any other npas. Ideally the screw shout be flat not spiked but that’s not a big deal. Anyway, this works but can only decrease FPS. If you want more FPS you need a different valve (like the vfc mp5 one) or use a longer valve spring with the mws valve (around 50% longer).

See the moment i see that, the first thought that springs to mind is "the one he's selling must be in shit condition" Thats actually worse than no photos because he's demonstrated the capability of taking them.

Well this is a first for me. Openly admitting that the picture used isn't the gun he's actually selling... https://airsoft-forums.uk/classifieds/item/14071-we-m4-cqbr-gbbr/

Small update of my Specnas and AAP Bottom left is my wanker gun (Titan, 28.5RPS and ludicrous response), top 933 is slightly less wanker at 27.5 RPS and runs on a Warfet. the Magpul handguard is definitely NOT FDE -.- can't complain though, it's PTS and got it for €9. More comfortable to hold than the standard 933 handguard.

There were a few issues I’ve had with my valve. Firstly, the translucent plastic adjusting screw was so tight fitting in it’s threads that the provided metal tool to adjust it did a lot of damage when adjusting, especially when performing the adjustment with it installed inside the nozzle. During testing, to adjust FPS, I had to disassembly the whole damn bolt to take the valve out then very carefully screw in/out to prevent further stripping, which was a major pain in the ass. Secondly, with the valve at its maximum setting I got to 1.3 joules, 102m/s with 0.25, and found that it was not consistent either. For example, with a fully gassed up mag I could get 102, then 95, then 103, then 94. Compared to the stock valve which barely has a deviation of 2m/s for me. It could be that this is because the valve was in a position where it was “too maxed out”, but for me the whole point of installing the valve was to reach the 5m minimum engagement distance limits here in Sweden (1.7j) so it’s not fit for my requirements. But there is someone here who uses the valve and has good performance, so I wonder if mine is a lemon or if it’s not the right one for my barrel length? I followed the guide on jkarmy for which one to get but maybe getting a valve for a longer inner barrel in order to over-gas the system and get more joule creep would be better.

I have this daydream which I guess needs to be crushed. It’s of an injection moulded magazine for the MWS just like the polymer glock magazine from WE Tech. Lightweight and with the same reliance as the original. how does one proceed with such an idea? Has reversed engineering come so far that you could 3D scan the outer shell of the Marui mag and make a mould for polymer? Alternatively 3D print polymer with heat sunk thread inserts for the valves? ...the whole affair sounds terribly costly but I can’t stop thinking about having these lightweight IPSC mags for the MWS.

Check the listings on jkarmy’s website, they say which one to use depending on the length or your inner barrel. I got the 3.5 one which is supposed to be good for my stock inner barrel, but performance was not good to be honest, I went back to the original valve.

Fleabay couldn’t give a flying fornication about fake stuff being miss sold , just as long as they get there cut .

Some WWII stuff Tanaka Arisaka Type44 Cavalry G&G M1903 converted to USMC Sniper version using a realsteel C-stock, Unertl reproduction scope and several realsteel metal parts:

That is a fucking bargain too. Probably worth £50 without the mags and acog to be fair.

AND just to show the total opposite end of the spectrum , here we have a fine chap being so truthful it almost brings a tear to my evil eye to see it ! Honest no bullshitery what you see is what you get Advert ! Good man indeed .

Wish airsoft sites were still gonna be open this month just got into a airsoft routine

wish I’d remembered I’d had a problem with this lot in the past , ordered from them on the wknd initial order conformation received nothing since , just rang them to be told “oh sorry didn’t realise it’s out of stock in the shop , but it’s on its way from the wearhouse !” The retailer equivalent of “checks in the post !” ?🤬 Edit 6.11.20, well wish I had remembered not to use this retailer , when I spoke to them on Tuesday I was told would be on its way to me either Wed or thur just rang again to be told “oh no you miss under stood , it’ll be with US wed or thur not you” (and best of all it’s ‘due in’ today from there magical warehouse !) British retailers complain about being under cut by foreign online sellers and lack of “support for the uk industry” well it’s there own fault , if they’d been up front and kept me informed I’d not have had a problem waiting BUT they didn’t . So yea stay away from these clowns unless you REALLY have no other option .

This is Cyclops. Called Cyclops because, well... he's only got one eye. This is Lemmy, A.K.A The Murderfloof

Cleaned, lubed, gassed and packed away all my gear until this lockdown is over 😪