Leaderboard

My Korean Armed force Granite pattern gear This is the latest and completed setting HEAD GEAR Mich 2000 Granite pattern helmet cover Cat eye band Rhino NVG mount & Arm mount PVS-14 BODY Granite pattern JPC Hydration pack Camel bag Triple mag pouch Double pistol mag pouch IFAK Utility pouch Compass pouch PRC-152 Radio pouch TRI PRC-152 w long antenna / Hand mic M2 Artillery compass 5x STANAG 30rd magazine 1x STANAG 20rd magazine 2x Marui G17 magazine UNIFORM Republic of Korea Army Granite pattern uniform Basic belt Treksta 4th gen combat boots ETC Blackhawk! serpa G17 holster

He lives just down the road from me if he's actually in talke. I could almost shout "its overpriced you dreamer" from my back garden and hed hear it.

I have ordered a couple of times from Powair6. PTS emp mags and other accessories but never a rif. I have never had any problems, items perfect, delivery tracked and reasonably fast.

As much as this is true, you’ve gotta be some sort of fucking nut job to pay that for a reusable grenade! 😂

I agree. Normally when I review airsoft guns there is usually some soft of negative point but I'm finding it hard to find anything slightly wrong with the DE I just reviewed. I think that if all the DE models work as well as this then the big boys are going to have to step up to compete.

Daewoo K2 and previous jpc setup It's little bit old Taken at 2019 Seoul Platoon convention

A brief history of the RS Honey Badger. Developed in 300 BLK ammunition for the replacement of the US SOG MP5 SD range however it was never adopted but AAC and then Q went on to refine the Honey Badger and offer it to the civilian market. Currently the range includes an SBR, Pistol (actually an SBR but with brace instead of stock) and lastly a suppressed model. The Double Eagle M904G. Double Eagle is normally a name I have shunned as they have made some pretty bad, low powered airsoft guns over the years and it would take a lot for me to even consider buying anything from DE. When I saw the new M904G from DE appear on the Taiwangun website I almost overlooked but I thought I’d have a closer look at it seemed to be a good external copy of the real Honey Badger. After looking into DE’s offering a bit more it got my interest when it claimed it had an adjustable trigger, Mosfet as standard and claimed to be able to binary fire out the box. For info Binary fire is the latest crazy in the US RS market where you get 1 round fired when you pull the trigger and another round off when you release the trigger. I have a mate in the US who has built an SBR in .45 with a binary trigger and it’s mental to fire. Another selling factor for me was the price. DE are offering various models and the M904G can be had for £106. That’s right, an AEG with mosfet, binary trigger, hair trigger and adjustable burst fire (1-5 rounds per trigger pull) for 104 quid. It’s either going to extremely crap or extremely awesome at that price. So after ordering and waiting a few days the AEG has turned up. It’s packaged inside a nice box with foam protection. Inside the box you get the AEG, Hicap magazine (300 rds), cleaning/unjamming rod, a wind up key for the magazine (also has the standard wheel on the bottom to wind if you want), a spare Deans connector, a Deans to Mini Tamiya connector, a decent manual and a Mosfet setup guide. The rifle is made of polymer apart from the outer barrel, Flash hider, Gas pipe, Fake bolt cover, sliding stock rails, part of the magazine catch, charging handle and the nuts and bolts holding everything together. The polymer used is very thick and has no wobbles, creaks or thin spots. Overall it seems rock solid and will take a lot of abuse. Looking in a bit more detail, starting from the front and working back, the flash hider is a metal copy of the Q Cherry Bomb flash hider which has threads on the outside to take a Q flash hider (Thunder Chicken or Trash Panda suppressors) however I don’t think anyone makes an airsoft version of these so if you want to fit a suppressor or another flash hider you an as the flash hider is held on with a grub screw to the -14mm threaded outer barrel. The metal outer barrel has a low-profile gas block fitted and is surrounded by a M lock style rail system. The top of the rail is full picatinny and is held on using a unique clamp system which relies on a nut to hold everything in place. The clamp system seems to be made of metal and also seems rock solid. The upper receiver is in the honey badger shape with cut-outs for the sliding stock. There are also some trades for the FALCON fire control system which is the name for the mosfet inside the gearbox. The dust cover looks to be metal and is spring loaded. The charging handle is a raptor style one and when pulled back makes the dust cover flick down however the fake bolt cover doesn’t lock to the rear so you need to hold the charging handle to the rear to adjust the Hop up. The lower receiver has a fake bolt release, metal receiver pins that are locked in place with allen headed screws, a DE trademark, an extended mag release button, plastic selectors and a very well textured and ergonomic pistol grip. The trigger is plastic but doesn’t have any flex when pulled to the rear. The trigger guard is designed for gloves and is moulded into the lower receiver (just like the real thing). The stock is in the honey badger style and inside is the battery wires which have a deans connector as standard. The Deans to Mini Tamiya in the box allow you to use a battery with a mini Tamiya connector if you want. The sliding stock has 3 positions but if you wanted to extend it more then cutting slots into the metal rails wouldn’t be an issue. The sliding stock is spring loaded so when you press the 2 side buttons to free the stock it pops out slightly making it easier to deploy. The stock cap is more like a cross between a stock pad and brace as it has a cutout on the lower part and there is a little lateral movement but nothing to panic about. There is also a sling loop at the point where the stock meets the lower receiver. The AEG comes with a set of polymer iron sights and these seem to be a copy of the IMI Defense polymer flip up sights. The sights have working elevation and windage adjustments and lack the IMI trademarks. Let’s move onto how it fires. So attaching a 7.4v Lipo in the stock tube you hear the mosfet beep to let you know it’s good. Out of the box it is set for maximum trigger pull, safe-semi-auto but after a couple of minutes following the supplied mosfet programming guide I had it on a hair trigger, with binary fire and burst set to 3 bb’s per trigger pull. Resetting it back to standard takes about 5 seconds if want to start again. With the 7.4v fitted it really is a snappy firing AEG. So snappy that when I fitted a 11.1 Lipo I didn’t see much different in semi but to be honest all this goes out the window anyway when you have the binary trigger set as when you spam the trigger in Semi there are BB’s flying all over the place. It’s awesome. Mine is firing too hot for UK sites so I’ll need to change the spring out for something a bit lower in FPS. I’ll also mention that the hop unit is a rotary designed one and looks to work well with .2g’s and I’ll try it out later with some heavier BB’s to see what it can handle. Part 2 will be a strip down and there is very little I want to change externally (unlike me) and all I will do to this one is fit a holosight and look at possibilities for fitting a tracer. Initial impressions are that it’s ridiculously good AEG for the money and I’m looking at Double Eagle in a new light. Here’s a size comparison of the 904G next to a ARP 9.

Free market. He clearly knows it's a sought after item and perhaps doesn't know about the new BFGs that are similar. Perhaps he does. Either way, it's most likely not going anywhere at that price. Even if some noob does pay more than RRP it's irrelevant as you can't buy them new anymore. It's all very well pointing out the piss takers when there is a plentiful supply of alternatives but for stuff no longer made, you just have to let the market decide.

sorry mate, tell your wallet I'm sorry!

Not that much it doesn't, especially as there are viable alternatives still available, clearly he's massively overpriced it to allow wiggle room for haggling, hoping some desperate noob still pays more than RRP.

Trust pilot score is 4/5 with some good and some bad reviews pertaining to customer services. Not the best sample size on 12 reviews but still.. An old thread on here about them from 2017: Seems okay, webby looks good.. will add them on. If you are looking to purchase from an overseas retailer sometimes it's good to do a dry run with some parts or accessories and see how that goes before purchasing an RIF.

【CUSTOM GBB WORKSHOP】 BERETTA Px4 Storm SubCompact WE base deep marking, deep 0.3 mm

It's no longer manufactured. He can name his price pretty much. However excessive.

It's literally double the average RRP (if you can find one in stock), I don't think "dreamer" is an accurate description for ads like that, maybe we need a "piss taking cnut" thread for the really speshul ones🤪 I do hope he visits the forum ? 😏

lol..that teaches me for rushing

So I tested the AEG today using various weighted BB's and the results are: 0.2g upto and including 0.28g no problem with hop or overhop 0.3g upwards don't hop. I'll probably run 0.28g BB's until I get around to S hopping the inner barrel. If you buy 1 and want to run heavier BB's then you will need to look at another hop rubber/bucking/hop unit to run the heavier BB's. I also tried to measure the inner barrel as I'm curious to see what the inner diameter is however I ran into a couple of snags. The first being the flash hider. The grub screw that holds it on and the flash hider actually have thread lock on them. I wasn't expecting this for such a cheap AEG and is something normally seen on high end AEG's. I had to end up press fitting a star drive bit into the grub screw to get it out and used set of pipe pliers to get the flash hider off. This sounds like a negative but its not. It just means the build quality coming from DE is pretty high. You can see on the picture below the red residue of the threadlock on the inside of the flash hider. Once I got the flash hider off I used my calipers to measure the inside of the inner barrel and got a weird reading of 7.4mm as I pushed the calipers in further it got smaller 6.4 until I couldn't fit the calipers in any further. It turns out the inner barrel has a taper for the last 15mm of the inner barrel. Again this came as a surprise on such a low cost AEG. I haven't stripped the gearbox yet but I did find this good photo on Taiwangun showing the internals. I've pretty much set on this layout for now (apart from a 3D printed battery entender which is printing as I type this). If anyone is interested it's now £104 on Taiwangun and this is a mental price for such a good little AEG. I'm tempted to go buy one of the longer models as I think this whole series from DE could be very good value for money. *EDITED as I don't know which way a red dot goes on a rifle

Holy fucking shitballs... That's a bump in price!

No. Superceded by this post (on page 14): Including adverts from our own Classifieds helps to educate the membership of the forum.

I’ll go and get my conch and pig’s head. 🤓

waaaait a second, is a seller putting their own ad in macks with a link showing the product being cheaper brand new!?

Have to say it's worked. Someone got a little twisted up by the ad though. Had 3 messages wanting to buy. Job done I think.

First gun and bits and bobs arrived - I had asked in another thread which pistol to buy and understand this was probably asked quite a few times in the past however thank you to @Heath @heroshark @Davegolf @Dentonboy @Nick G @Zarrin @BigStew for your helpful replies - @rocketdogbert mentioned at the beginning of the thread that the TM FNX-45 was the best out of the box pistol available at the moment and that’s what I got - My gun model is Mazie😜

Resin 3D printed Gas plug installed until the VFC one gets here from Japan.

Hi, Just to add to your list, I have had lots of experience with retailers from Poland as i my kit is in WZ 93, and found very limited in UK for that camo , they have always very helpful , and have had no problems what so ever, deliveris have always being on time Baribal - www.baribalpoland.pl DBR Custom Gear - www.dbrcustomgear.com Spec Shop - www.specshop.pl e-militaria - www.e-militaria.pl besides the ones you already have in your list

Latest build.

That I’ll have you know is Egyptian desert camo ! it‘s also known as ‘scrambled egg camo’ , and it’s mainly worn by the Dept of antiquities special response unit ! (I shit you not !😳) 🤣🤣🤣