Skara Posted October 18, 2019 Share Posted October 18, 2019 1 minute ago, carlos469 said: My Daniel Defense MK18 AEG 😄 hope yall like it. Should I keep the covers on or off from the sides of the rail? Looks good, I'd keep them off if I were you, just to let the handguard shine in all its glory. carlos469 1 Link to comment Share on other sites More sharing options...
PopRocket123 Posted October 18, 2019 Share Posted October 18, 2019 16 minutes ago, carlos469 said: My Daniel Defense MK18 AEG 😄 hope yall like it. Should I keep the covers on or off from the sides of the rail? Looks wise definitely leave them off. No point covering up what makes it look like a MK18. If it's about comfort do what I did and just put them where you need them like I have. Sawyer and carlos469 1 1 Link to comment Share on other sites More sharing options...
carlos469 Posted October 18, 2019 Share Posted October 18, 2019 29 minutes ago, Lozart said: Very nice, I'd leave them off but I wear gloves so that may make the difference for comfort. I wear gloves too but I'll try it out when I play this Saturday 😄 thanks! 14 minutes ago, PopRocket123 said: Looks wise definitely leave them off. No point covering up what makes it look like a MK18. If it's about comfort do what I did and just put them where you need them like I have. Will see if it doesnt bother me this weekend, nice gun. Debating if I want one of those 1x6 scopes Link to comment Share on other sites More sharing options...
PopRocket123 Posted October 18, 2019 Share Posted October 18, 2019 8 hours ago, carlos469 said: I wear gloves too but I'll try it out when I play this Saturday 😄 thanks! Will see if it doesnt bother me this weekend, nice gun. Debating if I want one of those 1x6 scopes It's a 1-4X BSA short dot. I highly recommend it carlos469 1 Link to comment Share on other sites More sharing options...
Crazy Druid Posted October 19, 2019 Share Posted October 19, 2019 Here is my weapon collection so far... Not bad for 4 weeks! Oh I also got a 360 grenade, just need to find a decent Claymore! Sawyer, Francisco and EDcase 3 Link to comment Share on other sites More sharing options...
Jacob Wright Posted October 19, 2019 Share Posted October 19, 2019 Went for a nice lightweight load out today at Camp Bravo. Ditched the plate carrier and just ran the Minimi and my P226. Excellent day popping up and ambushing people! EDcase 1 Link to comment Share on other sites More sharing options...
Popular Post Lasbrisas17 Posted October 21, 2019 Popular Post Share Posted October 21, 2019 Night vision loadout ready for the blackevent hosted by THG Francisco, SgtTalbert, GeorgePlaysAirsoft and 3 others 4 2 Link to comment Share on other sites More sharing options...
Francisco Posted October 22, 2019 Share Posted October 22, 2019 - specna arms MK18...another one - Helikon(I think) outer belt -D3CR replica MC tropic -lbx Armatus replica MC tropic -glock 19 (don’t know brand tbh) EDcase 1 Link to comment Share on other sites More sharing options...
Lasbrisas17 Posted October 22, 2019 Share Posted October 22, 2019 Tried on my kit before the night vision event GeorgePlaysAirsoft and Tony.S 2 Link to comment Share on other sites More sharing options...
Popular Post clumpyedge Posted October 24, 2019 Popular Post Share Posted October 24, 2019 Thought I'd do a gear dump for some people that have been asking about various bits of kit I've shown in pictures recently and also when ive been out at games in particular the tacvents I got from tacvent which help to keep the body cool whilst wearing a plate carrier which ultimately helps with regulating your body temperature. 1st line OPS D-Ring Cobra Warrior Belt PIG FDT Delta Utility Glove Tactical Tailor Roll-Up Dump Bag ESSTAC 5.56 single KYWI Shorty Mag Pouch Spiritus Systems Medium GP Pouch Safariland 6354DO Glock 17 ALS Optic Light Bearing Holster With QLS 19 Fork Safariland UBL Mid Ride with QLS Receiver 2nd line Spiritus Systems OVERT w/4" cummerbund Ferro Concepts Turnover Magazine Pouch - Triple 5.56 (until I get the Spiritus 5.56 Placard) Baofeng UV5R Thales labelled fist mic Tacvent plate carrier vent system All the equipment above was sourced through both tacticalkit and hueys and as always I'm running the travail fitness group 3.2kg multicurve m81 granite2 plates. Francisco, ziontrain, FreeFrag.UK and 2 others 5 Link to comment Share on other sites More sharing options...
AJC Posted October 24, 2019 Share Posted October 24, 2019 ^ Looks great clumpyedge 1 Link to comment Share on other sites More sharing options...
clumpyedge Posted October 24, 2019 Share Posted October 24, 2019 13 minutes ago, AJC said: ^ Looks great Thanks mate Link to comment Share on other sites More sharing options...
Skara Posted October 24, 2019 Share Posted October 24, 2019 1 hour ago, clumpyedge said: Lots of cool shit Just a question, why are you carrying the dump in that position? Link to comment Share on other sites More sharing options...
clumpyedge Posted October 24, 2019 Share Posted October 24, 2019 3 minutes ago, Skara said: Just a question, why are you carrying the dump in that position? My own personal reason is I find it easier to put mags in a downwards motion once empty rather than reaching to the back, it also flaps about less as how the belt sits it's actually directly over my hip so won't flap as much back and forth compared to being more behind me. I don't just use it for empty mags, if I'm doing target stuff I can put my speed loader etc in there or other bits and pieces and it's easier to access. The GP pouch goes further to the back as during game it holds stuff that I use less often so makes sense to have the dump closer to the action of drawing out an empty mag. Again though this is just my personal opinion and how I find it easier to do things. I'd happily take suggestion that it's easier to do other ways but this just suits me at the moment. GeorgePlaysAirsoft and Skara 1 1 Link to comment Share on other sites More sharing options...
SgtTalbert Posted October 24, 2019 Share Posted October 24, 2019 31 minutes ago, Skara said: Just a question, why are you carrying the dump in that position? For me it would be the natural position for dumping mags. Mines pretty much in the same position clumpyedge and GeorgePlaysAirsoft 2 Link to comment Share on other sites More sharing options...
Musica Posted October 24, 2019 Share Posted October 24, 2019 mine is similar but my magazine is in front of it instead of behind. clumpyedge 1 Link to comment Share on other sites More sharing options...
clumpyedge Posted October 24, 2019 Share Posted October 24, 2019 12 minutes ago, Musica said: mine is similar but my magazine is in front of it instead of behind. I did have it in front but I found it interfered with the front plate to much when bending in certain directions. I don't often have mags in the cummerbund so it doesn't interfere where that pouch is currently. Link to comment Share on other sites More sharing options...
Beardedviking94 Posted October 25, 2019 Share Posted October 25, 2019 Delivery day... now I'm literally the definition of 'all the gear and no idea' Bolle safety airsoft safety goggle Ultra light spec ops helmet Viper cross steel face mask 8 fields jump plate carrier and plates All from patrol base Tackle 1 Link to comment Share on other sites More sharing options...
RossF Posted October 25, 2019 Share Posted October 25, 2019 On 22/10/2019 at 18:27, Francisco said: - specna arms MK18...another one - Helikon(I think) outer belt -D3CR replica MC tropic -lbx Armatus replica MC tropic -glock 19 (don’t know brand tbh) 8fields d3cr or is there another clone out there? Link to comment Share on other sites More sharing options...
Skara Posted October 25, 2019 Share Posted October 25, 2019 1 hour ago, RossF said: 8fields d3cr or is there another clone out there? Emerson and TMC make replicas of the d3cr, along with one low quality Chinese brand I can't remember.. Francisco 1 Link to comment Share on other sites More sharing options...
Francisco Posted October 25, 2019 Share Posted October 25, 2019 1 hour ago, RossF said: 8fields d3cr or is there another clone out there? Emerson Link to comment Share on other sites More sharing options...
PopRocket123 Posted October 25, 2019 Share Posted October 25, 2019 1 hour ago, Francisco said: Emerson Do you know if the Emerson rigs are compatible with the WAS Recon PC? Link to comment Share on other sites More sharing options...
Popular Post Cromulon1994 Posted October 26, 2019 Popular Post Share Posted October 26, 2019 I've played in a suit before, but never gave it much thought. A mate suggested a payday theme as he bought the official vinyl masks, so we modified them into airsoft masks, (and tested them) Lined the inside of the jackets with velcro, added some pouches, and it was the most comfortable days airsoft I've had in ages. Just carry 4 mid caps, a bfg each and some spare 209s in a tic tac box. 45 quid for a suit from matalan, can't remember what he paid for the masks, and some pouches nicked off an old chest rig. StayOnTarget, GothicGhost, EDcase and 6 others 8 1 Link to comment Share on other sites More sharing options...
Cromulon1994 Posted October 26, 2019 Share Posted October 26, 2019 Oh, and none of us bother with pistols, just put the first 20 shots in a mid cap as red tracers and the rest green so as soon as reds start coming out we are ready for a change. GeorgePlaysAirsoft, Stratton Oakmont and StayOnTarget 3 Link to comment Share on other sites More sharing options...
Francisco Posted October 28, 2019 Share Posted October 28, 2019 On 26/10/2019 at 00:40, PopRocket123 said: Do you know if the Emerson rigs are compatible with the WAS Recon PC? in theory, yes! the HS D3CR is compatible with the Recon via 2 buckles on each side cummerbund and the 2 on top ( and Velcro ), but specs in repro gear is sometimes a bit off. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now