hitmanNo2 Posted October 12, 2019 Share Posted October 12, 2019 Yeah. They did them in 9mm. Link to comment Share on other sites More sharing options...
AK47frizzle Posted October 12, 2019 Share Posted October 12, 2019 PTS Rainier Arms mini comp for my SR-3M: Imo, looks cooler plus -100 grams off the weight of the gun (138g vs 38g woweeee). Already jagged myself a couple times. TheFull9 1 Link to comment Share on other sites More sharing options...
Dentonboy Posted October 12, 2019 Share Posted October 12, 2019 Few new bits snapped up, conveniently discussed here: https://thegearconfessional.wordpress.com/2019/10/12/chapter-59-tactical-bits-pieces/ Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted October 13, 2019 Supporters Share Posted October 13, 2019 13 hours ago, Tackle said: Did they not do a larger caliber version ?, thought it was at least 9mm, .22 seems almost pointless in that kinda setup As mentioned by hitman, they did, muzzle energy with 9 is 'more' than 22 but range would still be similar (i.e. very little, 2-300m range tops and with extreme arc) whereas you could push a Minimi to over a K in the right circumstances. Muzzle velocity on 556 is a whole different league as you know. Link to comment Share on other sites More sharing options...
Moderators Tackle Posted October 13, 2019 Moderators Share Posted October 13, 2019 1 hour ago, TheFull9 said: As mentioned by hitman, they did, muzzle energy with 9 is 'more' than 22 but range would still be similar (i.e. very little, 2-300m range tops and with extreme arc) whereas you could push a Minimi to over a K in the right circumstances. Muzzle velocity on 556 is a whole different league as you know. Lol, obviously I didn't mean it genuinely was a match for a 249, I meant it was a bit of a revelation in the "gangsta armoury", with its high ammo capacity & rate of fire. Link to comment Share on other sites More sharing options...
hitmanNo2 Posted October 13, 2019 Share Posted October 13, 2019 Pretty sure no "gangsta" would have gotten a full auto Calico M960A due to NFA. Link to comment Share on other sites More sharing options...
Dentonboy Posted October 13, 2019 Share Posted October 13, 2019 On 12/10/2019 at 08:05, Cromulon1994 said: Bought a couple of harder to find bits. Been searching for the calico m1000 for a few years but only recently set up a contact in Japan who's willing to ship juicy things out. The calico is sat in customs while they figure how much lube they're going to use, and I found a goblin deuce as a bit of an impulse buy. The photos are from the guy that's sent it over from Osaka. I can't wait to actually have it. And it will be skirmished. Can your man in Japan source any Western Arms Beretta 1934's?! Thanks! Link to comment Share on other sites More sharing options...
Cromulon1994 Posted October 13, 2019 Share Posted October 13, 2019 3 hours ago, Dentonboy said: Can your man in Japan source any Western Arms Beretta 1934's?! Thanks! Probably. But it's early days currently. Looking at getting a few jac ar18s and some tm uzis over next. Link to comment Share on other sites More sharing options...
Dentonboy Posted October 13, 2019 Share Posted October 13, 2019 Would be interested in an Uzi - I regret selling my last two! Cromulon1994 1 Link to comment Share on other sites More sharing options...
Popular Post EDcase Posted October 13, 2019 Popular Post Share Posted October 13, 2019 Bit the bullet and got myself one of these: Obviously wrong colour so now looks like this: (all brush painted. No spray) Not for gaming but just a wall hanger GeorgePlaysAirsoft, L3wisD, Tackle and 3 others 3 3 Link to comment Share on other sites More sharing options...
Mostly Retired Moderators L3wisD Posted October 13, 2019 Mostly Retired Moderators Share Posted October 13, 2019 6 minutes ago, EDcase said: Bit the bullet and got myself one of these Mate. I am so incredibly jealous. You have no idea! What I wouldn't do for one of those. Link to comment Share on other sites More sharing options...
EDcase Posted October 13, 2019 Share Posted October 13, 2019 12 minutes ago, L3wisD said: Mate. I am so incredibly jealous. You have no idea! What I wouldn't do for one of those. Yeah, I've been holding off for a couple of years but seen that they're getting harder to find in stock for under £300 so thought this will be my Xmas present this year 🤩 Head over to BBguns4less and put it in your basket for 24hrs to get the 7% discount £278 and getting rarer by the day... Some 'Olive Drab' paint and off you go Link to comment Share on other sites More sharing options...
Cromulon1994 Posted October 13, 2019 Share Posted October 13, 2019 1 hour ago, EDcase said: Yeah, I've been holding off for a couple of years but seen that they're getting harder to find in stock for under £300 so thought this will be my Xmas present this year 🤩 Head over to BBguns4less and put it in your basket for 24hrs to get the 7% discount £278 and getting rarer by the day... Some 'Olive Drab' paint and off you go Saw one of the screen used ones earlier this year Link to comment Share on other sites More sharing options...
EDcase Posted October 13, 2019 Share Posted October 13, 2019 Yeah I found a picture of it. Amazing how rough it looks lol Link to comment Share on other sites More sharing options...
EvilMonkee Posted October 14, 2019 Share Posted October 14, 2019 Been on a wee bit of a splurge. Tokyo Marui MWS and 3 extra mags Complete set of Irish Army camo - which is really expensive and rare as its illegal for anyone in Ireland to sell it or wear it unless in the Irish military. The Irish Government also holds the licence so only Arktis do any copies as they supply the Army Ranger Wg and its really expensive from them. £85 for a pair of trousers!! The smock I picked up is much much better than our issued British kit, waterproof lined from the get go. Wo1f 1 Link to comment Share on other sites More sharing options...
Moderators Tackle Posted October 14, 2019 Moderators Share Posted October 14, 2019 1 hour ago, EvilMonkee said: Been on a wee bit of a splurge. Tokyo Marui MWS and 3 extra mags Complete set of Irish Army camo - which is really expensive and rare as its illegal for anyone in Ireland to sell it or wear it unless in the Irish military. The Irish Government also holds the licence so only Arktis do any copies as they supply the Army Ranger Wg and its really expensive from them. £85 for a pair of trousers!! The smock I picked up is much much better than our issued British kit, waterproof lined from the get go. Now you need an aug to make the loadout complete 👍 Link to comment Share on other sites More sharing options...
EvilMonkee Posted October 14, 2019 Share Posted October 14, 2019 46 minutes ago, Tackle said: Now you need an aug to make the loadout complete 👍 Did consider it, but going for a Ranger Wg loadout and they use M4s and 416ds. Plus I don't like AUGs Tackle 1 Link to comment Share on other sites More sharing options...
Moderators Tackle Posted October 14, 2019 Moderators Share Posted October 14, 2019 1 hour ago, EvilMonkee said: Did consider it, but going for a Ranger Wg loadout and they use M4s and 416ds. Plus I don't like AUGs I love the Augs, but hate the triggers, so flogged mine.🤔 Link to comment Share on other sites More sharing options...
XanderShadow Posted October 15, 2019 Share Posted October 15, 2019 ASG Schofield .45 and a Umarex Legends 6mm Winchester on the way! Link to comment Share on other sites More sharing options...
Philby21 Posted October 15, 2019 Share Posted October 15, 2019 Tan Fab Defense G21 holster for my Glock, fits like a glove and delivery from Israel was just over a week. Hmm, I wonder if this'll put me on a watch list somewhere??? 😎 Link to comment Share on other sites More sharing options...
Popular Post Wo1f Posted October 15, 2019 Popular Post Share Posted October 15, 2019 Another mws and a nice Vortex red dot to sit on it. CES_williamson, Lozart, EvilMonkee and 3 others 2 4 Link to comment Share on other sites More sharing options...
Skara Posted October 16, 2019 Share Posted October 16, 2019 Cytac molle adapter for my dtd. But guess what, it doesn't fit my Emerson belt because its molle is off spec on the sides (has small panels instead of a uninterrupted strip of nylon).. So I guess I'm going to sell the belt and look for another one -.- Or I could mod the adapter, cheaper and easier option really.. Link to comment Share on other sites More sharing options...
Sawyer Posted October 16, 2019 Share Posted October 16, 2019 3 hours ago, Skara said: Cytac molle adapter for my dtd. But guess what, it doesn't fit my Emerson belt because its molle is off spec on the sides (has small panels instead of a uninterrupted strip of nylon).. So I guess I'm going to sell the belt and look for another one -.- Or I could mod the adapter, cheaper and easier option really.. I'd definitely go with the modding. This is kinda why I vowed to stay away from replica gear for the most part. You spend your money, and you get something that's either out of spec from the word go, or lasts about a month, and then you buy another. Cheaper genuine gear will usually trump cheaper replicas trying to be gucci bits of kit. You might spend a little more, say £45 vs £20, but if you're only buying it once, it's worth it. Link to comment Share on other sites More sharing options...
Skara Posted October 16, 2019 Share Posted October 16, 2019 11 minutes ago, Sawyer said: I'd definitely go with the modding. This is kinda why I vowed to stay away from replica gear for the most part. You spend your money, and you get something that's either out of spec from the word go, or lasts about a month, and then you buy another. Cheaper genuine gear will usually trump cheaper replicas trying to be gucci bits of kit. You might spend a little more, say £45 vs £20, but if you're only buying it once, it's worth it. Everything I have on that belt (apart from 2 pouches) is RS btw xD Since I'm ignorant and uneducated, I just zip tied the adapter onto the belt problem solved, and when I finally find a decent real steel belt that fits my needs, I will still have an unmodded adapter to use Sawyer 1 Link to comment Share on other sites More sharing options...
Sawyer Posted October 16, 2019 Share Posted October 16, 2019 6 minutes ago, Skara said: Everything I have on that belt (apart from 2 pouches) is RS btw xD Nothing ignorant or uneducated about zip ties (and various types of tape!) After my clumsy arse stripped screws out of my stock tube on my TM, that was held together with a combination of both for a while! Not trying to be a snob or anything like that, just stung too many times by Chinese products! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now