Jump to content

Recommended Posts

  • Supporters
Posted

79 guns.... you really aren't helping...

You just gotta accept that list is never gonna go down... But don't worry... I'm sure some of the new stuff I'm getting here in the states will grow your list a bit... Muhahahahaha

Posted

XZ3bdbr.jpg

 

My TM MP7 AEP fully tacti-cooled :)

God I want an MP7....I have no use for it other than it being my favorite weapon of all time.

 

very nice sir

Posted

What grip is that?

 

It's a Laylax grip for MP7 & RIS. Don't think it's quite made it over here yet. I broke the hop-up when swapping the barrel (screw too tight and dial/wheel snapped) and only replacement i could find was off a japanese website. This was the first result under an 'MP7 search' there and listed as a new product.

 

I figured it'd be more comfortable and stop the 'i'm gonna snap it off' paranoia the stock folding grip seemed to inspire in me. Certainly is more comfortable, but it's still v small gun and the angle you hold it at means i found my sleeve caught on the torch i put on the left side-rail few times.

Posted

God I want an MP7....I have no use for it other than it being my favorite weapon of all time.

 

very nice sir

 

I got it for the single-shot only 2nd half of the skirmish day at The Mall, when there's no point dragging 3-4kg of full-auto AEG around for. I find gas pistols a pain in the ass so was going to get an AEP like the marui g18, but then realized this was essentially the ultimate AEP, sharing many components with said marui g18.

 

So I talked about getting one, then stumbled across one here 2nd hand and snapped it up. Not realizing my mates had gone and bought me a new one for my birthday.

 

So now I have 2 MP7 and a wish blind-fire rules weren't quite so strict so I could enjoy an action-hero moment or two :) I filled the 2nd hand one with laylax internals and a custom spring, but still having issues with fps consistency. I'm told i need to fire a few thousand rounds through it for it to break in the spring and let it all settle before i start worrying about what else is causing the inconsistency (between 270 and 310 fps)... I'll see, might be me not sealing things properly, was a total bitch of a little fiddly gearbox to mess with, certainly straight in the deep-end for me with it being first gearbox i'd replaced internals for.

Posted

 

I got it for the single-shot only 2nd half of the skirmish day at The Mall, when there's no point dragging 3-4kg of full-auto AEG around for. I find gas pistols a pain in the ass so was going to get an AEP like the marui g18, but then realized this was essentially the ultimate AEP, sharing many components with said marui g18.

 

So I talked about getting one, then stumbled across one here 2nd hand and snapped it up. Not realizing my mates had gone and bought me a new one for my birthday.

 

So now I have 2 MP7 and a wish blind-fire rules weren't quite so strict so I could enjoy an action-hero moment or two :) I filled the 2nd hand one with laylax internals and a custom spring, but still having issues with fps consistency. I'm told i need to fire a few thousand rounds through it for it to break in the spring and let it all settle before i start worrying about what else is causing the inconsistency (between 270 and 310 fps)... I'll see, might be me not sealing things properly, was a total bitch of a little fiddly gearbox to mess with, certainly straight in the deep-end for me with it being first gearbox i'd replaced internals for.

Yeh I am the same, I'm not a fan of gas at all. I got a WE glock 23 & was a total dissapointment. Sold it & never replaced it.

 

The MP7 has been my top weapon for years before I got into Airsoft since I saw & held a real one at the royal armories here in Leeds.

 

Maybe one day I will justify getting one, although I'm struggling to find a use in woodland skirmishing :)

Posted

That MP7 is fantastic!!!

 

Me wanty :)

Posted

That MP7 is fantastic!!!

 

Me wanty :)

Guest PT247
Posted

Not a proper gun picture, although it is in the background ;-)

Been working on getting my VSR to 350 fps, it came firing 310, I ordered a 100 spring which took it to 325 fps so ordered a 110 spring which then shot up to 410fps.... so put back in the 100 spring and it is now bang on the money.... Amazing what ensuring a good air seal can do for your fps/consistency! :D

 

_20150623_153823_zpskpmllnjp.jpg

Posted

Not a proper gun picture, although it is in the background ;-)

 

Been working on getting my VSR to 350 fps, it came firing 310, I ordered a 100 spring which took it to 325 fps so ordered a 110 spring which then shot up to 410fps.... so put back in the 100 spring and it is now bang on the money.... Amazing what ensuring a good air seal can do for your fps/consistency! :D

 

 

 

Good servicing! Out of interest what does 350fps with 0.3g bb equate to with 0.2g?

Guest PT247
Posted

.... ahh see what you mean, although the chrono says 0.3g BBs that was with 0.2g BBs.....

 

Had I been hitting 350 on 0.3g BBs it would equate to around 430fps on 0.2g BBs.

  • Supporters
Posted

so my new scope arrived

 

BD3A8A96-F4AF-4F48-B072-AD6B6036B83B_zps

 

(this is a work in progress, TM L96 AWS, Hawke 11235 scope, QD bipod, jack pyke barrel cover, jack pyke stealth tape (i am going to change this as i dont think it will works that well with my ghillie suit))

  • Supporters
Posted

VFC SR-16 upper re-threaded to proper RS specs. ALG Defense barrel nut installed along with the barrel and gas block/tube, all nice and straight and secure. Just need a new muzzle device to properly cover the inner (since it's slightly longer than the outer) and I can finally finish this build. It's taken ages since there was originally a VFC URX II on there which consist of a primary barrel nut, the rail itself which screws on to the threads that are on the outside of said barrel nut, then another outer-barrel securing nut. All 3 parts were torqued to insane values way beyond what's needed for airsoft and while there is a proprietary tool available to remove the outer barrel nut, there is no tool on the airsoft market for the tiny little primary nut or the actual rail. Took a lot of improvisation to get the damn thing apart so as to switch the forend.

 

18501202874_c7925cd942_b.jpg

Posted

 

M4 and glock 17 - thinking of a metal rail and an eotech

 

Wow, they look amazing! love the m4 loads!

How much were they altogether?

  • Supporters
Posted

19377767302_e87447c4d7_c.jpg

Ho-lee-schizer... Dang that thing's beautiful.

Posted

Really not much those are just a reasonably stock combat machine and a second hand WE glock!

Whats the nameof the m4? Brand eg?

Thanks.

Posted

Whats the nameof the m4? Brand eg?

Thanks.

he just said its a combat machine lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...