Leaderboard

Dressed it up a little with what I had laying around

Because i'm particularly bored this morning - PTS ZEV Core Elite M4 - £399.99 - https://www.patrolbase.co.uk/pts-syndicate-zev-core-elite-ar-15-carbine-aeg-14-5-inch (approximating as he has the shorter version which LWA used to sell at more like £370) • PolarStar F2 Engine (installed) £439.99 - https://highpressureairsoft.co.uk/products/polarstar-f2 • Airtac adapter - Airtac doesn't make an adapter for this platform, so that's bullshit. • Redline Red Hair Trigger board - £24.99 - https://highpressureairsoft.co.uk/products/redline-v2-trigger-board • Vortex Optics SPARC AR Red Dot (with transferable lifetime warranty) £199.99 - https://www.landwarriorairsoft.com/product/vortex-optics-sparc-ar-red-dot-2moa-8757 • Acetech Predator X tracer unit - £85.00 - https://www.bztactical.co.uk/acetic-predator-x-tracer-unit • M-ETAL B5-style M-LOK Grip Stop - £11.99 - https://www.landwarriorairsoft.com/product/m-etal-b5-systems-style-gripstop-12957 • Surefire-style replica flashlight - doesn't specify which, but you can get these for £20 in various places. • 5x PTS EPM 150rd Midcaps (2023 version) - £29.95 each, so £149.75 - https://www.bztactical.co.uk/pts-epm-enhanced-polymer-magazine-aeg-black • Original AEG internals included Tokyo Marui Hi-Capa – £149.99 - https://www.defconairsoft.co.uk/product/tokyo-marui-hi-capa-5-1-gbb-pistol/ • Airtac Hi-Capa HPA adapter - £44.99 - https://airtac.me/products/hi-capa-ssp-ssp5-to-m4-hpa-adapter-next-gen • Full internals upgrade list available (image included) - No details included on what specifically, so lets assume that's bollocks as well. • Surefire-style replica pistol light - Same again, unspecified, can be had for around £20. • Acetech Bifrost R Tracer Unit - £85 - https://www.airsoftcentral.co.uk/acetech-bifrost-r-airsoft-tracer-red-green-bbs-full-rgb-multi-colour-muzzle-flash.html • Comes with original parts CYMA Platinum MP5 (AEG) - £299.99 - https://www.patrolbase.co.uk/cyma-platinum-cm-041g-smg-5-aeg-kestrel-basic-etu?pv=27932 • 22TPA High Torque Motor - undisclosed manufacturer, so could be anything, but cheap options can be had for £15 • Perun V2 Optical MOSFET - £69.98 - https://www.bullseyecountrysport.co.uk/perun-airsoft-v2-hybrid-mosfet-44887-p.asp • 13:1 Steel Gear Set - this is irrelevant, as this comes in the gun as standard. • Binary trigger mode (Full Auto replaced) - (douchebag) feature of perun • 4x Metal Midcaps + 1x Polymer Midcap - £60 from just about anywhere. • Comes with original internals Gear & Accessories: • Dye i4 mask (excellent condition) - £99.95 - https://www.bzpaintball.co.uk/dye-i4-goggle-black • 2x Storm CAT 5 Regulators (RRP ~£140 each) - price is right for that particular rebrand, but they're rebrand of a model which can be bought on Aliexpress for less than £30 a piece. • Dye HPA Tank + Tippmann HPA Tank - £50x2 - https://airtac.me/products/valken-48cl-0-8-litre-tank?_pos=5&_sid=af1271cdd&_ss=r • 2x Amped Airsoft HPA Lines - £40 each - https://shop.super5ives.com/shop/item/119721/amped-airsoft-standard-weave-36-hpa-line-black.html • 2x Chest Rigs with morale patches - nobody cares anyway • 2x FMA mesh face masks - again, nobody cares • Green Gas (multiple cans), BBs (standard + tracer), spare batteries (7.4v & 11.1v), flashlight batteries, Deans/Tamiya adapters - nominally £100 because can't be fucked counting in the pictures. • All carry cases included - Looks like hasta crap, so £50. • Most original boxes + spare parts REAL new total = £2546.60 70% of which is *drumroll please* - £1782.62 Almost £1500 less than he is asking.

I'm not a fan of Mark Felton video's as they tend to be a bit 'dry', but this one made me feel pretty good about my MP5 DIY build.

Picked up this E&C on the forums what feels like forever ago, took a while to get it where I wanted it both externally and internally but it’s finally there after finding the time to repaint it.

Glad I'm not the only person that Posts a listing Checks the forum a few hours later Sees a new macks thread Panics ?

I love this thread It puts the effing FEAR into me every time I list an item ?

Asking £55 when it’s £45 brand new (Although some places have it listed at £55, either way, LMAO)

Once you buy a lathe you'll find space. 😛 Both need to be sold some time as i need bigger machines.

At least he followed rule 5 ?

I'm inclined to agree, Just-Cos has been proven to be a load of shite that can only go wrong eventually, with potential repercussions to every law abiding player, something none of us wants. On the basis that the majority of forum members have voiced opposition to the Just-Cos setup, I don't think there's any more productive discussion can be had, so im locking the thread. If anyone feels im wrong to do this, please pm me & we'll discuss it further.

DnB Miliataria coming in clutch on a Harris Bipod. Call my gun Lieutenant Dan cos he got legs now.

As limited companies must be registered with Companies House, I pointed this out to him; his response was: ”The reason this is not registered with companies house is because it is £50”

I’ve intentionally bought two items from SixMM. I wonder if I’ll get two scented candles instead of what I ordered? Maybe it’ll never be delivered? Who knows?

Hi all, been a few years since I made a post. Just thought I'd share my build of the HMLMG from the video game Rust. I think its one of the coolest looking craftable guns from the game, and since seeing it I've always wanted to have an working airsoft version of it. HMLMG stands for HandMade LMG, hence why I thought it would be possible to actually do this project with the limited tools & materials I had. One of the things I didn't want to do for this was to damage the base gun, so attaching this HMLMG "case" to the base gun was a bit of a challenge, but in the end everything is removeable and the base gun underneath can be extracted completely unharmed. The build: -Base gun is a G&G Firehawk (DSG version), chosen for high RoF but also the loud sound that the Firehawk makes. -Box mag from the G&G CM16 platform, perfect shape and positioning compared to the source material (but yes it also takes just regular M4 mags). -Aluminium sheets for main structure (easy to shape without needing machinery, still relatively durable). -M3 nuts & bolts to hold most parts together. -Bit of fence from garden for stock. I used aluminium sheets for the main "case" of the gun which just goes over the base gun, cut to shape and held in place using nuts & bolts. The main barrel is made of aluminium pipes except for the giant hex nut which is steel, and the buffer tube on the rear of the gun is attached by long bolts to a u-shaped aluminium piece. Its all mainly held on by the bolts on the buffer tube, and by a very long extended outer barrel which runs right to the end of the aluminium pipe, which is then held on by a 14mm CCW piece which is perfect for securing the whole thing to the base gun. Everything was made at home using a hacksaw, scissors, screwdrivers, & aluminium tape, except for the holes on the heat shield & the buffer tube/outer stock which were done at the local men's shed. To access the fire selector I had to make a lever, but it is removable so doesn't get in the way in skirmishes. The mag release is still accessible as the underside of the HMLMG casing isn't filled in and I can just reach my finger up there. The Firehawk's external bits were removed, including charging handle, and the dust cover stays open, so hop-up is accessible by opening the top cover. The weight (without BBs in mag) is 3.3kg, roughly the size of an M249. I mostly tried to keep as accurate to the HMLMG in Rust as I could, but I had to compromise on the front grip as it seems too tedious to attach. The charge handle being a brass knob for a drawer also seems out of place as I want to leave the gun as full black for now at least. Modifications: -Due to the extreme upgrade in outer barrel length, I had to replace the inner barrel using a spare sniper barrel from a M40A3, which then caused the hop-up to need changing to a Mapleleaf 70. On the first skirmish I couldn't find the hop-up sweet spot, so replaced the unit with a rotary hop unit from Retro Arms. -The magazine was rewired to a button that sits on the heat shield as the original feed method was non-ideal. Performance: The gun is largely stock as it was brand new and I mainly did this just for the "look", and the DSG Firehawk's base performance is great from the first few weeks of using it. I'm running it on a 7.4v LiPo, it does around 1.07 joules (340 FPS on 0.2) at 29 RPS, so far found it to have good range and accuracy using 0.28g BBs. Magazine also feeds with 0 issues. Since the gun absolutely vomits BBs I'm changing to 0.25s in the next game just to lower the costs slightly... In the future I may upgrade its performance maybe for 11.1v batteries, but for now I don't see any need. Definitely a bit of a crude construction, but hey it looks the part, is sturdy, and most importantly it shoots like a beast.

There's only one BB as far as I'm concerned...

You're all wrong, in airsoft it stands for Bolshy B#stard, its what we all become when we're convinced that some cheating canute isn't taking their hits from our sooper dooper gnu that has laser like accuracy up to 300m 😉

Hand canon vs bigger hand canon. Love this thing yet to shoot it properly yet, been looking for one of these for a while and as soon as I seen one pop up here in the classified with the AW kit I had to buy it.

Fuck me that could gag a maggot

Gen 3 PVS-14 And a MCL-S2 stock

Thought I'd just share my favourite photo from my last game day.

Yes @superwok read the room. Nobody is going to help you so give it a rest or to put it bluntly, fLIP off YOU NAUGHT MAN, & STOP TRYING TO FIND WAYS TO GET AROUND THE LAW. Edit: I think it would be best for everyone if mods lock this thread

Wall

I am a newer member here but I have bought a few RIFs and had no real issues. The biggest gripe for me are the listing's that don't have "collection only" clearly stated on the post. Or they have "looking for a quick sale" but never reply to messages 🙄

These were out yesterday Banging in the woods 😁 The FAL is actually my mates. First time out for the OSW, it performed flawlessly, and great to be able to know that the huge gas capacity meant no need to gas up between games.

Been in a bit of a shotgun phase of late, so treated myself to an CAM870 off this very forum then swapped out the furniture. Complete faff to load and use but god is it cool.

Fancied something small and compact!

Trying to make my Hi-Capa to look a little like a 1911! I just need to get the safeties to be black to match the two tone aesthetic. Also added Tritium sights to be able to aim better in low light conditions

I was going to write loads about this but it’s 2am. Idk anyone who’d spend £600 on a second hand hicapa ? the few who might, are all part of the same circle and know this lad ? dreaming? Yes.

@ButcherBill No where near your legendary numbers, hahaha. But all my brit kit together. Getting it ready to take and display at NAF.

Ahhhhh FECKIT! Bang Bang is at their showing stock that isn’t stock shenanigans again I was so disappointed to get the cancellation email, I was at Airsoft World at opening time ?

So... Managed to get hold of a replica susat shield mount and RS sight These were seen in use on UKSF sa80s and sa80 ULG's. L22's were also seen in use by UKSF. So decided to fiddle about. Added the correct sa80 surefire and the rmr mount. Weathered it all a bit. So sticking within the bounds of an accurate brit kit weapon, have made a nice naughty little cqb...

"Fully upgraded" but nowhere in the description does it state what is upgraded. If you can't be bothered to list what's been done to it, why should I bother to message you to find out? ?

You can play 3 games with a registered site and get a UKARA defence or stick with one site that does its own defence after similar qualifying criteria for UKARA. Considering the instances of open-carrying cosplayers in the past ~18 months, I don't imagine a forum with regular players will want any further part in enabling a lack of common sense that jeopardises their ability to buy a RIF and act responsibly with it.

Now you're talking my language...

I do love the way they try and say it's used, but it's not really Used y'know. It was only one game day m8, basically fresh out the box. I didn't actually field it, I just gave it a soft lil kiss on the forehead during lunch break, no more than that I promise. No I don't have pics of the internals, why do you ask? It's lived a charmed 168 hours with me, it's been treated better than a wagyu cow.

"Buyer's remorse took a full week to set in."

I might list a “fully upgraded” glock next week and see if I can hear the aneurism from @Austeyr across the country ?

You see, that would require logic and common sense. You’re expecting too much!

Not even 10% below retail

Here is my poor man’s attempt to display some of my pieces in my “man loft”. Put together with old bed slats and any bits of wood I could find! However, my pistol collection isn’t up there yet. de83ab9f-a2fd-41cf-b5d9-27d864683e4f.mp4

inspired loosely on the AK's I've seen watching too many Ukrainian videos. It's a TM AKS74U with a bunch of aftermarket bits bolted on.

No. Just cos is a bullshit defence which only exists to take money from stupid people.

It takes a special kind of partner to agree to such things. Also make sure you trim your nails first?

Sellers who read your message but don't reply, even if only to state that they are not open to offers.

Hit a spot of enthusiasm while the SA80 was apart today fixing my HPA engine and finished the AG80 project I've been procrastinating on for a while so thought I would share, another bucket list build nearly done, hope everyone likes it

Companionship...