Cameron364

The 'What have you just bought' Thread

7845 posts in this topic

I wasnt upset that it had it, in fact i prefer it (if it were the right size :P)

 

What got me was that i thought the UBACS that i already had was army surplus, but i guess not.

 

The one you just bought might be older than the one you already have. The CS95 cut shirts had the elbow/forearm padding, they stopped putting it on the PCS cut though.

Share this post


Link to post
Share on other sites

My ubacs shirt had shoulder padding too. Took it all out..

 

Also the large size I had didn't fit and the extra large is definately too big but I prefer too big than small.

Share this post


Link to post
Share on other sites

Just puts a deposit down (until Saturday) on a warrior assault systems dcs plate carrier. Comes with 5 open top mag pouches, 1 utility and an open folding admin( all warrior) £90 all in posted

Lozart and Airsoft_Mr B like this

Share this post


Link to post
Share on other sites

A whole bunch of stuff from Samoon for my G5.... I kinda destroyed the lower receiver today:

 

11136668_10152730027616820_1746179531442

 

On a plus note, my HPA hi-cap mag is feeding flawlessly now! :D

Share this post


Link to post
Share on other sites

A whole bunch of stuff from Samoon for my G5.... I kinda destroyed the lower receiver today:

 

11136668_10152730027616820_1746179531442

 

On a plus note, my HPA hi-cap mag is feeding flawlessly now! :D

Were you shooting with the stock folded by any chance?

Share this post


Link to post
Share on other sites

0241 Tactical Woodland MARPAT Fleece Neck Gaiter

Buying Helikon MARPAT Trousers later today

 

fleece.jpghelikon.jpg

Share this post


Link to post
Share on other sites

Were you shooting with the stock folded by any chance?

no mate, stock extended on semi while chronoing at start of day. Is a v2 gun too!

Share this post


Link to post
Share on other sites

no mate, stock extended on semi while chronoing at start of day. Is a v2 gun too!

Not good man, what pressure were you running your HPA setup at? could that have been giving the bolt more force than Green or Propane?

 

other than that, all i can think of is that you love your G5 and youve put so many rounds through it that it just reached its time :(

Share this post


Link to post
Share on other sites

aye, I think trying to match the fps of a tbb when using a wbb is the issue. Gonna go back to a tbb and have also ordered the carbine kit for it too so will extend the barrel length allowing me to drop the psi further. I'm working on reducing the recoil too with a new nozzle and stiffer recoil spring and some other bits.

Share this post


Link to post
Share on other sites

Got this done by Stitch Me Up. I'll post pics when it is done

 

 

Ms0bdiW.png

Share this post


Link to post
Share on other sites

aye, I think trying to match the fps of a tbb when using a wbb is the issue. Gonna go back to a tbb and have also ordered the carbine kit for it too so will extend the barrel length allowing me to drop the psi further. I'm working on reducing the recoil too with a new nozzle and stiffer recoil spring and some other bits.

 

I saw your FB post :P

 

Im not sure that the nozzle will affect the recoil, as all three nozzles should perform identically once the valve in the nozzle closes and starts the blowback, but using a longer/tighter barrel will let you reduce the FPS.

 

Now im slightly concerned for mine as ive just fit a 6.23 barrel and am just waiting for my high power nozzle to arrive so i can get the FPS back up from around 276 fps

 

something has just struck me, That FPS is actually calculated from the energy, as in, I actually measured a 0.25g BB and converted its energy to the equivalent of a 0.20g BB, but chronoing on a 0.20 gave me 245fps from memory, thats a 12% increase in energy!

 

I,m gonna break out the chrono later and check that again...

Share this post


Link to post
Share on other sites

Clumpy mate I'm interested in doing a ranger green loadout, what trousers are those / where'd you get them from? Thanks!

Share this post


Link to post
Share on other sites

Clumpy mate I'm interested in doing a ranger green loadout, what trousers are those / where'd you get them from? Thanks!

 

Going by the picture they are TMC

Share this post


Link to post
Share on other sites

 

Going by the picture they are TMC

Cheers Mack found em now :)

http://www.ebairsoft.com/cargo10-tactical-pants-with-inside-pads-p-6361.html

http://www.aliexpress.com/item/TMC1909-RG-Cargo-10-m-knee-pants-with-inner-lining-M-L-XL-free-shipping/1667343574.html

 

Don't really trust ebairsoft though

 

Also bought AI mag today

Don't like how the whole Viper section is basically an advert though

Just seems to give a description of each product (like you'd find on the website) not a review at all like I was expecting :\

Share this post


Link to post
Share on other sites

ASG US Ordanance M60 MK43 MOD 1.

 

STAR-AEG-19-AG-1_01.jpg

 

Will do some upgrades ready for a milsim on 3rd May and also hopefully use it at this event OP:PANDORA's WRATH COPEHILL DOWN FIBUA VILLAGE 31/07-02/08 2015

Monty and Airsoft_Mr B like this

Share this post


Link to post
Share on other sites

S10 poly carbonate mirrored red lenses.

 

2 morale patches

$_57.JPG$_57.JPG

Share this post


Link to post
Share on other sites

 

You can also find them listed as Emerson Gen 3 Training Pants (emerson and TMC are different brands by the same company). I wouldn't touch ebairsoft with a long pole personally.

Airsoft_Mr B likes this

Share this post


Link to post
Share on other sites

 

I saw your FB post :P

 

Im not sure that the nozzle will affect the recoil, as all three nozzles should perform identically once the valve in the nozzle closes and starts the blowback, but using a longer/tighter barrel will let you reduce the FPS.

 

Now im slightly concerned for mine as ive just fit a 6.23 barrel and am just waiting for my high power nozzle to arrive so i can get the FPS back up from around 276 fps

 

something has just struck me, That FPS is actually calculated from the energy, as in, I actually measured a 0.25g BB and converted its energy to the equivalent of a 0.20g BB, but chronoing on a 0.20 gave me 245fps from memory, thats a 12% increase in energy!

 

I,m gonna break out the chrono later and check that again...

The nozzle will allow me to run lower psi from my rig to achieve the required fps, this will then put less strain on the receiver through recoil as more pressure will be used up firing the bb and less recocking I think.

Share this post


Link to post
Share on other sites

Plain black "Army of Two" style mask - BBQ.bike on eBay

27 shell shotgun belt in black - Dave's Custom Airsoft

"Hello my name is Inigo Montoya" patch (thanks again Lozart!) - Patch platoon on eBay

 

Mask because I love this style of face protection (plus I'm tired of welts on my forehead haha), shell belt because I'm looking for an alternative to my current shotgun set up (plate carrier) and the patch because I love the film "The Princess Bride".

SeniorSpaz87 and Airsoft_Mr B like this

Share this post


Link to post
Share on other sites

I love the film "The Princess Bride".

Think we need to make a "ROUS Hunter" patch? ;)

Happy and Lozart like this

Share this post


Link to post
Share on other sites

Think we need to make a "ROUS Hunter" patch? ;)

 

Rodents of unusual size? I don't think they exist.

Happy likes this

Share this post


Link to post
Share on other sites

Rodents of unusual size? I don't think they exist.

Have you ever seen one? No? You're welcome...

Lozart and M_P like this

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now