Jump to content

Airsoft_Mr B

Members
  • Content Count

    1,755
  • Joined

  • Last visited

  • Days Won

    2
  • Feedback

    N/A

Everything posted by Airsoft_Mr B

  1. Airsoft_Mr B

    Rounded Hex Bolt Removal

    Hi all I know this is a pretty general problem but I was wondering if anyone would have any suggestions specifically with regards to removing a rail system, as pictured? Just the on the left seems to have worn away so I can't remove it Thanks in advance. J
  2. Hi, This mine. It's not too late is it? Thanks in advance 👍
  3. Airsoft_Mr B

    HPA - DIN Fill Station

    This advert is COMPLETED!

    • Wanted
    • Used or new

    Need one of these: https://moderncombatsports.co.uk/products/fs-guerrilla-air-hp-fill-station-din If anyone happens to have such an adapter, or a link to somewhere else reputable they can purchased (preferably UK) Is 2-3 months for MCS (RAP4) to get any bck in and can find ONLY Far East sellers other than that. Thanks in advance for any info

    £40.00

  4. how does one go about getting one of those 'patch owner' things?

     

    1. MisterG

      MisterG

      Hi

       

      Buy a patch from the website look at the tabs at the top of the website.

      Click on the More tab

      Was on a tablet just now.

       

      Looks different on a PC, this is the link https://airsoft-forums.uk/store/

    2. Airsoft_Mr B

      Airsoft_Mr B

      Thanks, didn't realise there was a new one, I have the other two haha

       

  5. Airsoft_Mr B

    1/8BSPF ADAPTER

    Thank you mate, from reading that I can see where I've gone wrong, exactly the same problem as Lewis. So I bought the wrong adapter (for 'A' clamp as suspected and not the 'DIN' fitting) basically and it looks like the one listed there will do, should they get them back in stock Cheers again
  6. Airsoft_Mr B

    1/8BSPF ADAPTER

    Hi all, Long time since last posted. Bought a 4L tank today for my Tippmann and immediately saw that it didn't have an 'A' type valve (used on older <300bar setups from what I'm told) that my adaptor is for. Having realised this I questioned it and they have advised me you should be able to buy an adapter to fit a HPA tank but I don't have any more information other than that? Hoping anyone might possibly be able to shed any more light on this? Thanks in advance J
  7. Airsoft_Mr B

    The 'What have you just bought' Thread

    I do know there is a replica by 'Big Dragon', they called it the Hell Angel. Used to be listed on AirsoftClub but cannot find it at the moment, hope the name might help with finding one. https://moderncombatsports.co.uk/products/scuba-air-tank-refill-station?variant=39990245328 and will be getting one of these: http://www.roho.co.uk/watersports/3-Litre-300-bar-Air-Gun-Cylinder-With-Filling-Kit.html
  8. Airsoft_Mr B

    What you think of this helm?

    Cool! Cheaper than I expected, but that makes me suspect it is one of the 'value' versions of Ops Core helmets without the proper adjustment (I forgot what it's called). Still, I've been looking at mandible attachments for a high cut and they are £50 alone? I think it goes without saying just don't trust the face shield at all what with it protecting your eyes and all.
  9. Airsoft_Mr B

    Optic Reccomendations

    Hey everyone, Can anybody suggest any sights to me that will withstand the recoil of a Tippmann M4, budget being ~ £60 I'd say, preferably cheaper if possible though. Apologies if this's been asked before, which I think it has, but cannot find the old thread. Looking for a capable T1 or Aimpoint Comp M2 style red dot in this kind of price range but not sure my budget will allow it. Also looked at the 2.5-10x type scopes, there's one on AliExpress for £36 but I'm suscipious it would not hold up to much use. Thanks
  10. Hi all, Can anyone help to explain what I have done here? I'm sure I put the upper receiver back together as it should be, but the recoil block comes way too far out the back. I don't have my HPA tank filled atm so switched back to CO2 and it looks like it punctured the bulb and yet didn't release any gas, and the thing won't shoot at all. Hope you guys might have some suggestions but obviously I can provide more info if needed to resolve. Thanks J
  11. Money sent mate! Yes 1 x tan velcro
  12. Airsoft_Mr B

    Gun picture thread

    Sorry mate, I meant a tanker stock as in a retractable one like these Don't know if you can get an actual tank stock for em.
  13. Airsoft_Mr B

    We glock 17 torch and holster

    Depends on the weapon light if it will fit the holster properly. I bought this emerson one but haven't really used it yet. Another option could be this which is really similar, basically the same thing
  14. Airsoft_Mr B

    Gun picture thread

    I thought I'd put up a better photo of my Tippmann. Will be getting a tanker stock (TTRTec) to finish it off, at some point.
  15. I think there is a breakdown in a clause of the VCR Act it specifies bright orange, bright blue etc. But basically yes as everyone else has said it just has to be 50% brightly coloured. Technically it should also be solid yes
  16. Airsoft_Mr B

    EoTech Clone help

    I don't know about the vibration on the TM Recoil Shock but on gas guns cheaper optics won't always work because of that. So you will want to go with something like the Vector Optics.
  17. Airsoft_Mr B

    Gun picture thread

    Newly painted Tippmann + 10.3" barrel.
  18. Airsoft_Mr B

    Glove issues

    I have had the same problems, and I was getting the right sizes. Best I've found so far are the Mechanix Fast Fits but not a lot of others fit so well.
  19. Airsoft_Mr B

    Lozart

    Overall rating (1 - 10): 10Would you deal with the trader again (Yes / No): YesAny other comments: Sold my suppressor no problems at all. Thanks mate.
  20. Airsoft_Mr B

    Speed Loader

    You will want a speedloader no matter which way you are loading. There is only really one design as far as I know, for pistol compatible ones. I have a Tokyo Marui one and found it is far superior to the all white label versions.
  21. Airsoft_Mr B

    Quick Questions & Simple Answers.

    Anyone used a FAST helmet mandible? e.g. this Is cheek weld bad? And by 'Ops Core Highcut' does anyone think/know it'd work for the Maritime, too?
×