TheGrover Posted April 19, 2015 Share Posted April 19, 2015 You can remove the padding. I wasnt upset that it had it, in fact i prefer it (if it were the right size ) What got me was that i thought the UBACS that i already had was army surplus, but i guess not. Link to comment Share on other sites More sharing options...
James Flynn Posted April 19, 2015 Share Posted April 19, 2015 Soldering iron tips Solder Motor connectors Heat shrink Just a few things to sort out my L1A1 Happy, Ian_Gere, Sitting Duck and 1 other 4 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted April 19, 2015 Supporters Share Posted April 19, 2015 I wasnt upset that it had it, in fact i prefer it (if it were the right size ) What got me was that i thought the UBACS that i already had was army surplus, but i guess not. The one you just bought might be older than the one you already have. The CS95 cut shirts had the elbow/forearm padding, they stopped putting it on the PCS cut though. Link to comment Share on other sites More sharing options...
mcduff1979 Posted April 19, 2015 Share Posted April 19, 2015 My ubacs shirt had shoulder padding too. Took it all out.. Also the large size I had didn't fit and the extra large is definately too big but I prefer too big than small. Link to comment Share on other sites More sharing options...
airsoftwarrior147 Posted April 19, 2015 Share Posted April 19, 2015 Just puts a deposit down (until Saturday) on a warrior assault systems dcs plate carrier. Comes with 5 open top mag pouches, 1 utility and an open folding admin( all warrior) £90 all in posted Airsoft_Mr B and Lozart 2 Link to comment Share on other sites More sharing options...
Guest PT247 Posted April 19, 2015 Share Posted April 19, 2015 A whole bunch of stuff from Samoon for my G5.... I kinda destroyed the lower receiver today: On a plus note, my HPA hi-cap mag is feeding flawlessly now! Link to comment Share on other sites More sharing options...
TheGrover Posted April 20, 2015 Share Posted April 20, 2015 A whole bunch of stuff from Samoon for my G5.... I kinda destroyed the lower receiver today: On a plus note, my HPA hi-cap mag is feeding flawlessly now! Were you shooting with the stock folded by any chance? Link to comment Share on other sites More sharing options...
Airsoft_Mr B Posted April 20, 2015 Share Posted April 20, 2015 0241 Tactical Woodland MARPAT Fleece Neck Gaiter Buying Helikon MARPAT Trousers later today Link to comment Share on other sites More sharing options...
kerby91 Posted April 20, 2015 Share Posted April 20, 2015 Oh also bought a kjw p229 with laser sight and 3 mags...sorted 😁 Link to comment Share on other sites More sharing options...
clumpyedge Posted April 20, 2015 Share Posted April 20, 2015 Link to comment Share on other sites More sharing options...
Guest PT247 Posted April 20, 2015 Share Posted April 20, 2015 Were you shooting with the stock folded by any chance? no mate, stock extended on semi while chronoing at start of day. Is a v2 gun too! Link to comment Share on other sites More sharing options...
TheGrover Posted April 20, 2015 Share Posted April 20, 2015 no mate, stock extended on semi while chronoing at start of day. Is a v2 gun too! Not good man, what pressure were you running your HPA setup at? could that have been giving the bolt more force than Green or Propane? other than that, all i can think of is that you love your G5 and youve put so many rounds through it that it just reached its time Link to comment Share on other sites More sharing options...
Guest PT247 Posted April 20, 2015 Share Posted April 20, 2015 aye, I think trying to match the fps of a tbb when using a wbb is the issue. Gonna go back to a tbb and have also ordered the carbine kit for it too so will extend the barrel length allowing me to drop the psi further. I'm working on reducing the recoil too with a new nozzle and stiffer recoil spring and some other bits. Link to comment Share on other sites More sharing options...
DX115FALCON Posted April 20, 2015 Share Posted April 20, 2015 Got this done by Stitch Me Up. I'll post pics when it is done Link to comment Share on other sites More sharing options...
TheGrover Posted April 20, 2015 Share Posted April 20, 2015 aye, I think trying to match the fps of a tbb when using a wbb is the issue. Gonna go back to a tbb and have also ordered the carbine kit for it too so will extend the barrel length allowing me to drop the psi further. I'm working on reducing the recoil too with a new nozzle and stiffer recoil spring and some other bits. I saw your FB post Im not sure that the nozzle will affect the recoil, as all three nozzles should perform identically once the valve in the nozzle closes and starts the blowback, but using a longer/tighter barrel will let you reduce the FPS. Now im slightly concerned for mine as ive just fit a 6.23 barrel and am just waiting for my high power nozzle to arrive so i can get the FPS back up from around 276 fps something has just struck me, That FPS is actually calculated from the energy, as in, I actually measured a 0.25g BB and converted its energy to the equivalent of a 0.20g BB, but chronoing on a 0.20 gave me 245fps from memory, thats a 12% increase in energy! I,m gonna break out the chrono later and check that again... Link to comment Share on other sites More sharing options...
Airsoft_Mr B Posted April 20, 2015 Share Posted April 20, 2015 Clumpy mate I'm interested in doing a ranger green loadout, what trousers are those / where'd you get them from? Thanks! Link to comment Share on other sites More sharing options...
Mack Posted April 20, 2015 Share Posted April 20, 2015 Clumpy mate I'm interested in doing a ranger green loadout, what trousers are those / where'd you get them from? Thanks! Going by the picture they are TMC Airsoft_Mr B and Bottledtorment 2 Link to comment Share on other sites More sharing options...
Airsoft_Mr B Posted April 20, 2015 Share Posted April 20, 2015 Going by the picture they are TMC Cheers Mack found em now http://www.ebairsoft.com/cargo10-tactical-pants-with-inside-pads-p-6361.html http://www.aliexpress.com/item/TMC1909-RG-Cargo-10-m-knee-pants-with-inner-lining-M-L-XL-free-shipping/1667343574.html Don't really trust ebairsoft though Also bought AI mag today Don't like how the whole Viper section is basically an advert though Just seems to give a description of each product (like you'd find on the website) not a review at all like I was expecting :\ Link to comment Share on other sites More sharing options...
SgtTalbert Posted April 20, 2015 Share Posted April 20, 2015 ASG US Ordanance M60 MK43 MOD 1. Will do some upgrades ready for a milsim on 3rd May and also hopefully use it at this event OP:PANDORA's WRATH COPEHILL DOWN FIBUA VILLAGE 31/07-02/08 2015 Airsoft_Mr B and Monty 2 Link to comment Share on other sites More sharing options...
cropzy Posted April 20, 2015 Share Posted April 20, 2015 S10 poly carbonate mirrored red lenses. 2 morale patches Link to comment Share on other sites More sharing options...
Supporters Lozart Posted April 20, 2015 Supporters Share Posted April 20, 2015 Cheers Mack found em now http://www.ebairsoft.com/cargo10-tactical-pants-with-inside-pads-p-6361.html http://www.aliexpress.com/item/TMC1909-RG-Cargo-10-m-knee-pants-with-inner-lining-M-L-XL-free-shipping/1667343574.html Don't really trust ebairsoft though You can also find them listed as Emerson Gen 3 Training Pants (emerson and TMC are different brands by the same company). I wouldn't touch ebairsoft with a long pole personally. Airsoft_Mr B 1 Link to comment Share on other sites More sharing options...
Guest PT247 Posted April 20, 2015 Share Posted April 20, 2015 I saw your FB post Im not sure that the nozzle will affect the recoil, as all three nozzles should perform identically once the valve in the nozzle closes and starts the blowback, but using a longer/tighter barrel will let you reduce the FPS. Now im slightly concerned for mine as ive just fit a 6.23 barrel and am just waiting for my high power nozzle to arrive so i can get the FPS back up from around 276 fps something has just struck me, That FPS is actually calculated from the energy, as in, I actually measured a 0.25g BB and converted its energy to the equivalent of a 0.20g BB, but chronoing on a 0.20 gave me 245fps from memory, thats a 12% increase in energy! I,m gonna break out the chrono later and check that again... The nozzle will allow me to run lower psi from my rig to achieve the required fps, this will then put less strain on the receiver through recoil as more pressure will be used up firing the bb and less recocking I think. Link to comment Share on other sites More sharing options...
Happy Posted April 22, 2015 Share Posted April 22, 2015 Plain black "Army of Two" style mask - BBQ.bike on eBay 27 shell shotgun belt in black - Dave's Custom Airsoft "Hello my name is Inigo Montoya" patch (thanks again Lozart!) - Patch platoon on eBay Mask because I love this style of face protection (plus I'm tired of welts on my forehead haha), shell belt because I'm looking for an alternative to my current shotgun set up (plate carrier) and the patch because I love the film "The Princess Bride". SeniorSpaz87 and Airsoft_Mr B 2 Link to comment Share on other sites More sharing options...
Supporters SeniorSpaz87 Posted April 22, 2015 Supporters Share Posted April 22, 2015 I love the film "The Princess Bride". Think we need to make a "ROUS Hunter" patch? Happy and Lozart 2 Link to comment Share on other sites More sharing options...
Supporters Lozart Posted April 22, 2015 Supporters Share Posted April 22, 2015 Think we need to make a "ROUS Hunter" patch? Rodents of unusual size? I don't think they exist. Happy 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now