HuttArmouries Posted November 13, 2023 Share Posted November 13, 2023 (edited) 1 Edited November 14, 2023 by HuttArmouries Shamal, Tackle and BigStew 3 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted November 14, 2023 Supporters Share Posted November 14, 2023 Of all the pictures of objects posted on here that could be misconstrued, this post is up in the rankings it must be said. Nice GL mate 👍 Link to comment Share on other sites More sharing options...
Supporters Rogerborg Posted November 14, 2023 Supporters Share Posted November 14, 2023 Torn between CoolAF and Careful Now. What sort of energy are we talking here? Link to comment Share on other sites More sharing options...
HuttArmouries Posted November 14, 2023 Share Posted November 14, 2023 (edited) 2 hours ago, Rogerborg said: Torn between CoolAF and Careful Now. What sort of energy are we talking here? Same as a normal tag shell. The co2 adapter is just a quick way to refil it between shots. Im not sure how doubling the barrel length will affect something like this but ill be running it over a chrono to compare when its built. The shells are designed to be the same weight as standard tag ones too. Ill probably lose a fair bit of pressure as 3d printed parts arent exactly air tight. Ideally id want something with about 2/3 of the velicity of a normal tag round. Regular ones are a bit spicy for me to risk using on bunkers and stuff Edited November 14, 2023 by HuttArmouries Link to comment Share on other sites More sharing options...
HuttArmouries Posted November 21, 2023 Share Posted November 21, 2023 3 different lengths of 3d printed glock slide. all rmr ready. Planning to do some more custom stuff now the base models are done but I also still need to get my hands on a 34 Link to comment Share on other sites More sharing options...
GothicGhost Posted November 29, 2023 Share Posted November 29, 2023 On 30/10/2023 at 21:21, Enid_Puceflange said: ShadowFoam, finishes off the Cams quite nicely I think Well, gotta have somewhere snug for the Sig and the 416 backup to rest Very nice what bag is that? Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted November 29, 2023 Share Posted November 29, 2023 54 minutes ago, GothicGhost said: Very nice what bag is that? 5.11 Cams buddy Link to comment Share on other sites More sharing options...
GothicGhost Posted November 30, 2023 Share Posted November 30, 2023 On 29/11/2023 at 22:03, Enid_Puceflange said: 5.11 Cams buddy Nice thank you Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted December 10, 2023 Share Posted December 10, 2023 A pile of Ranger Bands IMG_0996.mov Link to comment Share on other sites More sharing options...
Popular Post mightyjebus Posted December 28, 2023 Popular Post Share Posted December 28, 2023 bought myself a new toy for Xmas and just trying out a few things. Still trying to get to grips with using a Laser Cutter/Engraver but it seems promising. gavinkempsell, Scythian, Enid_Puceflange and 3 others 3 3 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted December 28, 2023 Share Posted December 28, 2023 1 hour ago, mightyjebus said: bought myself a new toy for Xmas and just trying out a few things. Still trying to get to grips with using a Laser Cutter/Engraver but it seems promising. Im slowly working on my mrs to get one of these, she likes crafty things, I just need to fill her head with enough reasons for her to use one 😉 What make n model did you get? Link to comment Share on other sites More sharing options...
mightyjebus Posted December 29, 2023 Share Posted December 29, 2023 16 hours ago, Enid_Puceflange said: Im slowly working on my mrs to get one of these, she likes crafty things, I just need to fill her head with enough reasons for her to use one 😉 What make n model did you get? I picked up the 10W Elegoo Phecda for £185 from their website. it seems a bit pricier now at $385 but I'm sure it will go on sale again soon. Enid_Puceflange 1 Link to comment Share on other sites More sharing options...
Scythian Posted January 3 Share Posted January 3 Got my Son a 3d printer for Christmas which is getting thrashed, I don't think it's stopped printing for a week now. Printed a few airsoft bits and bobs including this visor stock and a couple of odin adaptors. Enid_Puceflange and DanBow 2 Link to comment Share on other sites More sharing options...
Scythian Posted January 4 Share Posted January 4 Would anyone have the 3d print files for an Odin adaptor to fit an MP9? I've looked in the usual places and can't find it. Obviously reluctant to buy a printed one when I could print it myself. Link to comment Share on other sites More sharing options...
DanBow Posted January 5 Share Posted January 5 (edited) Found this M4 mag funnel on Printables. Fits like a dream. Spoiler Edited January 5 by DanBow speeling Cannonfodder, Cocha, gavinkempsell and 1 other 1 1 2 Link to comment Share on other sites More sharing options...
Popular Post HuttArmouries Posted January 12 Popular Post Share Posted January 12 Working on an upper reciever to drop into one of my augs to make something close to the australian f90. There are a few differences on the lower as well but im not going for every detail. I just like the overall look of the foreend. Egon_247, _K4MF_, gavinkempsell and 5 others 7 1 Link to comment Share on other sites More sharing options...
Supporters SeniorSpaz87 Posted January 16 Supporters Share Posted January 16 Had a few things in the works over the past few months. First up: MG42 converted to MG3. Its probably 70% real steel parts nowadays. Its currently off getting HPA'd. *Really* excited to finally finish it. Had to pair up with a local guy who has a Wehrmacht kit and a MG42 for a quick photoshoot. Next, converted one of my Real Sword Type 97s, the 97b in this case, to HPA. Had to make a custom nozzle with some help from Norwest Airsoft in the States. Im slowly falling more and more for APS-shell shotguns, but hate dealing with shells. So sometimes I just use my Wargame Striker12, which contains spent shells. But for those days I prefer to use the 870, I found a biodegradable PLA material made from algae and am printing shells for that pretty constantly, whenever the printer isn't running on something else. They aren't very strong and tend to break after a few uses, but considering they cost a pence or two a shell, I don't really care. Next, my 417 EPM-1S project is nearing completion. I thought I had it down with v5 (last worked on in July 2022) but when I broke my G27K out of storage I found that the mag was far too large, and required loosening my hop unit to feed - so that wouldn't do. v10 seems to be the magic number; it feeds even with my hop properly installed, and seems almost perfect. Just a few cosmetic things need sorted, like the positioning of the BB window. Finally, this is an idea I've had for awhile but never got around to. I've wanted to make a Bundeswehr-accurate optic for my MG4, considering my only other option was finding a $1000+ Hensoldt 4x30i. Well, we've been snowed in here in the mountains for the past several days (and am about to be for several more) so I knocked this out in about 10 hours over the last two days. Its printing now, and if everything fits Ill send it off to be SLS'd. It uses real surplus Hensoldt 3x inserts meant for G36 optics, as the real one appears to - they're also pretty readily available which is good. It cannibalizes parts from a cheap G36 optic, including the G-36 style rail nuts, adjustment bolts and heat-sets, rail, rail bolts and heat-sets, and rubber view piece and forward scope retaining piece. Basically all one needs to make this optic is the files, the basic G-36 optic from your local airsoft shop, the three new crossbolts to attach it to the rail, and the Hensoldt insert. Jacob Wright, gavinkempsell, _K4MF_ and 1 other 1 3 Link to comment Share on other sites More sharing options...
Supporters SeniorSpaz87 Posted January 17 Supporters Share Posted January 17 Update on the MG4 optic: it works, and looks damn good on there. Even at 15% infill the PETG I used is very strong, and I was able to use it as a functional carry handle. Granted the MG4 is very light for a LMG and it’s currently empty, but still surprisingly it didn’t just crumble in half. I’ll probably sleep on the design and if I can’t find any faults with it tomorrow I’ll send for it to be printed in SLS for a “production” model. JimFromHorsham, gavinkempsell and _K4MF_ 3 Link to comment Share on other sites More sharing options...
The_Lord_Poncho Posted January 22 Share Posted January 22 A fairly productive weekend - a DPM sleeve to cover the red HPA hose that I've recently picked up, a couple of white medic arm bands made from an old T-shirt, A mini internal dump pouch to velcro inside of my chest rig pouch and to use for sorting out empty shot gun shells from full ones, and finally an el-cheapo hydration pack from aliexpress for my HPA bottle (turned up less than 5 days after ordering - a record!) sprayed up to tone it down a little. OTH21 and _K4MF_ 2 Link to comment Share on other sites More sharing options...
Supporters Tackle Posted February 9 Supporters Share Posted February 9 1 hour ago, LeiaGeorge said: Your weekend DIY projects sound fantastic! It's impressive how you've customized your gear to enhance your airsoft experience. From the DPM sleeve for your HPA hose to the mini dump pouch for sorting shotgun shells, your creativity shines through. It's always rewarding to see practical solutions come to life.If you're looking for more outdoor fun, you might enjoy checking out this article at https://nerfinfo.com/why-the-best-super-soaker-water-gun-is-a-summer-must-have. It's a great way to add some excitement to your outdoor adventures and keep cool during those intense airsoft battles. Enid_Puceflange 1 Link to comment Share on other sites More sharing options...
The_Lord_Poncho Posted February 9 Share Posted February 9 1 hour ago, Tackle said: Hey, I'm keen on this Leia - she makes me feel good about myself LOL. If only my wife were as keen on my 'fantastic weekend DIY projects' ! DanBow, Tackle, Egon_247 and 1 other 4 Link to comment Share on other sites More sharing options...
Supporters Tackle Posted February 9 Supporters Share Posted February 9 2 hours ago, The_Lord_Poncho said: Hey, I'm keen on this Leia - she makes me feel good about myself LOL. If only my wife were as keen on my 'fantastic weekend DIY projects' ! I think that's a wife thing, 20 minutes tinkering with a gun & they get all whiney, but when they've got a project that requires all your waking hours, no issues then lol Enid_Puceflange, Cocha, Egon_247 and 1 other 3 1 Link to comment Share on other sites More sharing options...
Hellfish Posted March 16 Share Posted March 16 (edited) Old bits of pouch, paracord and some time to kill = Knife Dangler to go along with the variety of (pretty basic) modifications I'm doing to my Viper Spec Ops Chest Rig to make it a little more "mine". Its a bit rough and ready and this may yet evolve into something better looking, but as for now .... Edited March 16 by Hellfish Link to comment Share on other sites More sharing options...
Skullchewer Posted 19 hours ago Share Posted 19 hours ago (edited) A bridge to go across the stream at Red Alert. It has two flag holders, one on each hand rail, for capture the bridge games. I'll be making more, and other additions to the site. One is finished but I'm not allowed to show it till after this Sunday's battlesim 😉 Edited 19 hours ago by Skullchewer The_Lord_Poncho, gavinkempsell and DanBow 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now