gavinkempsell Posted July 14, 2023 Share Posted July 14, 2023 (edited) 7 hours ago, mightyjebus said: Surefire FHSA80SA and Airsoft Artisan made a -14mm airsoft version. Well bang goes a chunk of my tax rebate. And this to finish off my A3... Edited July 14, 2023 by gavinkempsell TheFull9 1 Link to comment Share on other sites More sharing options...
MrTea Posted July 14, 2023 Share Posted July 14, 2023 (edited) Oof, that's a lot for a flash hider. I got my G&G L85 from the US because I couldn't find one anywhere else in the UK or EU (that was an ETU model) and they had the DD handguard in stock to go with it. This means the tip is painted blaze orange 😕 normally this wouldnt be an issue but it doesnt come with an all black one plus spares are hard to come by so I may have to resort to spraying it black unless anyone knows of any others that'll fit? Edited July 16, 2023 by MrTea Link to comment Share on other sites More sharing options...
Pupa2794 Posted July 15, 2023 Share Posted July 15, 2023 A little job for @Arrtee99 Making a schofield both shorter and also adding a hop, and a little bit of fettling to make the action a bit smoother. BigStew, Pinovic, Pappa Large and 1 other 4 Link to comment Share on other sites More sharing options...
MrTea Posted July 16, 2023 Share Posted July 16, 2023 (edited) On 14/07/2023 at 14:11, Lozart said: https://airsoftartisan.com/products/airsoft-artisan-fh556-style-silencer-with-fhsa80-flash-hider Spendy but his stuff is nice. For a bit of information for anyone else who wants/needs the flash hider for a L85 Airsoft Artisan actually sells the flash hider on its own, not with the suppressor as a bundle. You can find it here for $28. It doesn't show in the L85 subcategory which is why I was confused. Some HK stores also have it in stock if you google "FHSA80". Edited July 16, 2023 by MrTea gavinkempsell and Lozart 2 Link to comment Share on other sites More sharing options...
gavinkempsell Posted July 16, 2023 Share Posted July 16, 2023 (edited) On 21/06/2023 at 13:35, Duff Beer said: Finally finished my ICS L85A2 Got one of these flash hider's with a socom silencer to go on my A3, I'll fit it as soon as the cw - ccw adaptor arrives...DOH! Edited July 16, 2023 by gavinkempsell Link to comment Share on other sites More sharing options...
Federico Posted July 17, 2023 Share Posted July 17, 2023 Barret M468 NGRS Conversion Urban Camo Square Cerakote Esoterick and TheFull9 2 Link to comment Share on other sites More sharing options...
Popular Post Pupa2794 Posted July 17, 2023 Popular Post Share Posted July 17, 2023 More revolvers. Sorry. Pinovic, JustMark, Pappa Large and 3 others 6 Link to comment Share on other sites More sharing options...
enzo47 Posted July 17, 2023 Share Posted July 17, 2023 20 minutes ago, Pupa2794 said: More revolvers. Sorry. Whats makes are those? something I need add to my wishlist 😜 Link to comment Share on other sites More sharing options...
Pupa2794 Posted July 17, 2023 Share Posted July 17, 2023 They're all Tanaka except the bottom 1858 which is a tanaka system but made by HWS. I think the two engraved models are the only ones in the UK. They're Tanaka "Renaissance" versions. They're eye wateringly expensive though, but I do hope he uses them. The top left is a Bisley variant I've not seen so I needed that in my life and I prefer the Bisley to the standard saa. Link to comment Share on other sites More sharing options...
EDcase Posted July 17, 2023 Share Posted July 17, 2023 (edited) Oooh that Bisley is gorgeous Since we're on the subject of revolvers... Here's a King Arms SAA (one of the few gas revolvers I've seen. But only shoots about 240fps) All metal shells. BB goes at the top so can actually be loaded without taking out the rounds. Thanks to GazzaElite for this one 😉 Edited July 17, 2023 by EDcase Pupa2794, Diemaco, Nick G and 1 other 4 Link to comment Share on other sites More sharing options...
Pupa2794 Posted July 17, 2023 Share Posted July 17, 2023 (edited) 2 hours ago, EDcase said: Oooh that Bisley is gorgeous Since we're on the subject of revolvers... Here's a King Arms SAA (one of the few gas revolvers I've seen. But only shoots about 240fps) All metal shells. BB goes at the top so can actually be loaded without taking out the rounds. Thanks to GazzaElite for this one 😉 I had nothing but dissapointment with mine, but I hope you have a better experience. Lots of the 1st gen ones appear to have been made with the barrel out of line with the cylinder resulting in innacuracy and topsspin being applied to the bb. It's also a clone of the Marushin SAA if you ever need to find bits for it. The tanakas have their gas inside the cylinder, don't take shells but you load through the front. They have a hop and shoot with a bit more poke than the king arms or marushin. I do thoroughly reccomend one if you like revolvers. Edited July 17, 2023 by Pupa2794 EDcase 1 Link to comment Share on other sites More sharing options...
EDcase Posted July 17, 2023 Share Posted July 17, 2023 I've been lucky with this one. Fixed a slight leak in the reservoir which is in the handle. No hop but shoots relatively straight in my garden test of 20m I'll definitely look out for a Tanaka 😉 Link to comment Share on other sites More sharing options...
Popular Post JimFromHorsham Posted July 18, 2023 Popular Post Share Posted July 18, 2023 Finally got round to fitting a guarder railed frame to this 5.1 build Pinovic, Esoterick, Lozart and 3 others 5 1 Link to comment Share on other sites More sharing options...
Supporters Lozart Posted July 18, 2023 Supporters Share Posted July 18, 2023 11 minutes ago, JimFromHorsham said: Finally got round to fitting a guarder railed frame to this 5.1 build That's making me feel all funny in the pant region! JimFromHorsham, Nick G and Tackle 1 2 Link to comment Share on other sites More sharing options...
JimFromHorsham Posted July 18, 2023 Share Posted July 18, 2023 (edited) And fitting this AA DD416 rail , barrel nut & upper receiver threads took some fettling but go there in the end WE GBBR base Edited July 18, 2023 by JimFromHorsham AirsoftTed, Wavey_Gravey, EDcase and 1 other 1 3 Link to comment Share on other sites More sharing options...
Skullchewer Posted July 19, 2023 Share Posted July 19, 2023 11 hours ago, Lozart said: That's making me feel all funny in the pant region! I don't think there's anything funny about your pants region. Now show the nice people your SR25 Link to comment Share on other sites More sharing options...
Supporters Lozart Posted July 19, 2023 Supporters Share Posted July 19, 2023 9 hours ago, Skullchewer said: I don't think there's anything funny about your pants region. That's what she said. Anyway... G&G SR25 E2 APC. Replaced the URX4 M-Lok rail with the URX3.1 SR25 handguard and gas block plus a short little barrel extension. Aiming for an ECC type clone. Tackle, Skullchewer, Nick G and 1 other 2 2 Link to comment Share on other sites More sharing options...
Supporters Lozart Posted July 19, 2023 Supporters Share Posted July 19, 2023 Obligatory booger hook on the bang switch pic for inducing rage: Pinovic, JimFromHorsham and Skullchewer 2 1 Link to comment Share on other sites More sharing options...
Popular Post MrTea Posted July 19, 2023 Popular Post Share Posted July 19, 2023 (edited) Nothing new and still not finished but I managed to get the handguard mostly sorted on the G&G L85A2 ETU. Got a B&T/Airsoft Artisan dovetail to RIS optic rail coming in next couple of days. Airsoft Artisan flash hider coming in a couple weeks. Perun ETU++ to go into it tomorrow. The gun doesn't like my 11.1v buffer tube batteries and double cycles on semi however on my nunchuck 11.1v batteries it works flawlessly. On another topic, for owners of the gun, how do you arrange your batteries in this? There isn't a lot of space and i'm debating on taking out the gas block/gas tube to free up some space. Feedback on that appreciated. Also, should I disable the blowback? I've heard it can cause the gearbox to lockup on semi and there's potential for the little spring jumping into the gearbox. Edited July 19, 2023 by MrTea Nick G, Skullchewer, gavinkempsell and 2 others 5 Link to comment Share on other sites More sharing options...
gavinkempsell Posted July 19, 2023 Share Posted July 19, 2023 46 minutes ago, MrTea said: for owners of the gun, how do you arrange your batteries in this? There isn't a lot of space and i'm debating on taking out the gas block/gas tube to free up some space. Feedback on that appreciated. Also, should I disable the blowback? I've heard it can cause the gearbox to lockup on semi and there's potential for the little spring jumping into the gearbox. I have one ready to visit the local tech, it's blowback had been disabled ( I hear it fails pretty quickly), I also have an A3 that the charching handle pretty much dropped off after only a few dry shots). The hand guard has been dodged to fit the bracket(Some tin can cut & wrapped around the 'holes' to tighten the fit) but I' don't think it's a Daniel Defence front rail I have so didn't have the issue you've mentioned in another post.. I find a lipo fits fine in the fore grip (I bought a few of the micro lipo's to fit the A3 & use them for all my Rif's). Link to comment Share on other sites More sharing options...
MrTea Posted July 19, 2023 Share Posted July 19, 2023 (edited) 10 minutes ago, gavinkempsell said: I find a lipo fits fine in the fore grip (I bought a few of the micro lipo's to fit the A3 & use them for all my Rif's). By micro Lipo do you mean the PEQ box small square/rectangular batteries? Is there enough room to just drop them in? Pic related; Edited July 19, 2023 by MrTea Link to comment Share on other sites More sharing options...
Popular Post Hobbnob Posted July 19, 2023 Popular Post Share Posted July 19, 2023 Made a bracket out of aluminium for the 203 to fit on the MWS barrel MrTea, Nick G, Pinovic and 3 others 4 2 Link to comment Share on other sites More sharing options...
gavinkempsell Posted July 19, 2023 Share Posted July 19, 2023 1 hour ago, MrTea said: By micro Lipo do you mean the PEQ box small square/rectangular batteries? Is there enough room to just drop them in? Pic related; No, these... https://www.vapextech.co.uk/airsoft-7-4v-850mah-30c-lipo-battery-with-case-lp007-vapextech They fit in the handguard of an A3 Link to comment Share on other sites More sharing options...
Supporters SeniorSpaz87 Posted July 20, 2023 Supporters Share Posted July 20, 2023 Finally got around to sorting out fitting a Polarstar F2 in my Real Sword Type-97b. It was not easy. Pinovic, Lozart and Cain-c-123 2 1 Link to comment Share on other sites More sharing options...
CoCost Posted July 20, 2023 Share Posted July 20, 2023 On 19/07/2023 at 10:06, Enid_Puceflange said: We NEED pics of your build Sounds cool sp00n, Skullchewer, captaINstraiTJacket and 1 other 1 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now