Supporters Monty Posted December 15, 2016 Supporters Share Posted December 15, 2016 I think all new G&G rifles now come with a mosfet My Top tech m16 has the same mosfet, think it's about 2 years old. Link to comment Share on other sites More sharing options...
Hangtight Posted December 15, 2016 Share Posted December 15, 2016 Quite pleased with the way this has turned out... MikeMarden, Spuggy1uk, ImTriggerHappy and 1 other 4 Link to comment Share on other sites More sharing options...
Supporters SeniorSpaz87 Posted December 15, 2016 Supporters Share Posted December 15, 2016 Quite pleased with the way this has turned out... Winter Flecktarn. Niiiiiice Link to comment Share on other sites More sharing options...
Hangtight Posted December 15, 2016 Share Posted December 15, 2016 Winter Flecktarn. Niiiiiice Only cos I couldn't find matt paint rattle cans in the correct colours! It's not quite as far off as the pics make it look. I think the lighting on the matt lacquer knocks the colours back. But if anyone questions me about it, it's Winter Flecktarn! Link to comment Share on other sites More sharing options...
Guest PT247 Posted December 17, 2016 Share Posted December 17, 2016 Nothing as fancy as Hangtight's art: Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted December 17, 2016 Supporters Share Posted December 17, 2016 How's the SureFire 60 replica? Presuming that one's a hi-cap? Link to comment Share on other sites More sharing options...
Guest PT247 Posted December 17, 2016 Share Posted December 17, 2016 How's the SureFire 60 replica? Presuming that one's a hi-cap? I really like them, have had to put some tape down the back of the mag to get it to sit in the gun properly and remove the wobble. Is pretty tight now but with 850BBs you never need to reload (I use in semi 99% of the time too). Link to comment Share on other sites More sharing options...
LewisUK Posted December 21, 2016 Share Posted December 21, 2016 Krytac MK2 PDW NP Point RDSSwiss Arms Sight ProtectorPTS EPM 150rd Mag x3ARES Keymod HandstopNuprol NX600 flashlightVulcan Defence Bungee Sling7.4v LiPo Battery x2 (Thank you again PT247 for the suggestion. Very very nice gun.) Monty 1 Link to comment Share on other sites More sharing options...
Samuelol Posted December 22, 2016 Share Posted December 22, 2016 Really enjoying my wolverine DMR so I decided I'd go for something similar for when I'm not feeling sneaky and want to make some noise. Tippmann m4. 6.23 orga barrel, 3D printed flat nub and prommy purple rubber. Very impressed with the build quality and realism by tippmann. Kick is beautiful and it's loud as heck. People give the handguard a hard time, simply because it's plastic... Come on, it's built like a tank, highly customisable and feather light. I don't plan to change it. Link to comment Share on other sites More sharing options...
Georgeturner2001 Posted December 22, 2016 Share Posted December 22, 2016 Really enjoying my wolverine DMR so I decided I'd go for something similar for when I'm not feeling sneaky and want to make some noise. Tippmann m4. 6.23 orga barrel, 3D printed flat nub and prommy purple rubber. Very impressed with the build quality and realism by tippmann. Kick is beautiful and it's loud as heck. People give the handguard a hard time, simply because it's plastic... Come on, it's built like a tank, highly customisable and feather light. I don't plan to change it. IMG_20161216_142007-3456x2592.jpg Looks really good, I take it it performs as good as it looks! Link to comment Share on other sites More sharing options...
Georgeturner2001 Posted December 22, 2016 Share Posted December 22, 2016 http://imgur.com/vPWOVXh both need some work! Perform nicely but look kind of...meh Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted December 22, 2016 Supporters Share Posted December 22, 2016 IMHO, that ARES looks pretty decent right now. Not a fan of the accessories on the Krytac, but if it works for you it works for you. Link to comment Share on other sites More sharing options...
Georgeturner2001 Posted December 22, 2016 Share Posted December 22, 2016 IMHO, that ARES looks pretty decent right now. Not a fan of the accessories on the Krytac, but if it works for you it works for you. I was trying to replicate the MK11 from lone survivor, obviously I failed! They will both be fully kitted out after Christmas when I have some spare money Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted December 22, 2016 Supporters Share Posted December 22, 2016 I wouldn't say you failed at anything, it's airsoft you have no limitations placed upon you. However the main featured rifle in Lone Survivor was a Mk12 (556), so if you did want a Mk11 (762 NATO) you're on the wrong calibre with that Krytac. I've not seen Love Survivor, but if you're going for this gun: Then as things stand, you'd need to change everything but your upper to get a close replication. Obviously how close you want to get on copying the details is entirely a preference, if you just want the vague style not a super-picky uber-accurate impression; just change to a quad rail and alter a couple of accessories on the current build then paint it and it would be along roughly similar lines in terms of general style. Link to comment Share on other sites More sharing options...
Georgeturner2001 Posted December 22, 2016 Share Posted December 22, 2016 I wouldn't say you failed at anything, it's airsoft you have no limitations placed upon you. However the main featured rifle in Lone Survivor was a Mk12 (556), so if you did want a Mk11 (762 NATO) you're on the wrong calibre with that Krytac. I've not seen Love Survivor, but if you're going for this gun: Then as things stand, you'd need to change everything but your upper to get a close replication. Obviously how close you want to get on copying the details is entirely a preference, if you just want the vague style not a super-picky uber-accurate impression; just change to a quad rail and alter a couple of accessories on the current build then paint it and it would be along roughly similar lines in terms of general style. I was just thinking long rifle with scope and suppressor, wasn't actually trying to replicate it completely. I have to admit I'm not clued up on the mk11s, mk12s etc, I just want to create something similar. Thinking about painting them in that scheme though, looks pretty decent. JamesAirsofterAgent 1 Link to comment Share on other sites More sharing options...
Popular Post mightyjebus Posted December 27, 2016 Popular Post Share Posted December 27, 2016 Esoterick, Sico, Spuggy1uk and 3 others 6 Link to comment Share on other sites More sharing options...
Ricky.bb Posted December 27, 2016 Share Posted December 27, 2016 Still getting used to this site updated a pic of my recent purchas Link to comment Share on other sites More sharing options...
lemon191 Posted December 27, 2016 Share Posted December 27, 2016 New ones my growing collection JG m733 TM Ak47 Valken m4 cqb We m16 Cyma glock 18c WE M9 Marine version WE glock 17 JamesAirsofterAgent and Albiscuit 2 Link to comment Share on other sites More sharing options...
MrMcG Posted December 27, 2016 Share Posted December 27, 2016 My up to date 6mm death machines Albiscuit and djben9 2 Link to comment Share on other sites More sharing options...
Dysperse Posted December 28, 2016 Share Posted December 28, 2016 My WE HK416 GBBR with: RA-Tech steel internals (hammer, sears, BCG, etc...); 6.01 precision inner barrel; maple leaf hop up (diamond 70* I think); Magpul AFG and Nuprol Cobra QD suppressor. Seeing as I'm a bit of a realism nut, I went ahead and ordered the VFC GBBR 416 stock and pistol grip to get it closer to the real thing. I also have an ACOG replica and rail mount for my ledlenser p7.2 with a pressure switch on the way. I was also debating a badger tactical latch and magpul ASAP for that "cool but still somewhat useful" look (my current sling setup is ragtag at best). I know, I know. It's quite a common look for a common gun, but this one is mine and I love it 😋. Even with that damn cool down in winter. [Edit] The ACOG and torch mount turned up. This is it with them attached. [Edit 2] Now the VFC grip and stock to make it more accurate to the real thing Note: if anyone else is thinking of doing this, you should note that VFC use a slightly smaller buffer tube than WE, so it a super tight fit but it goes on. Also VFC don't use a spring for the fire select the way WE do. Be prepared for a lot of careful drilling and sanding / filling as they also don't use the exact same width for the pistol grip mounting point. It wasn't too hard to figure out but it's tedious and took up my morning. Let me know what you think JamesAirsofterAgent 1 Link to comment Share on other sites More sharing options...
Popular Post Greg147 Posted December 28, 2016 Popular Post Share Posted December 28, 2016 Well, my S&T Stirling has survived it's first paint-job! Very basic but I much prefer green to the original black. Just wish it was a little darker, but oh well. I'm sure I'll have to redo it after a few months anyway Roundel91, Monty, Albiscuit and 5 others 8 Link to comment Share on other sites More sharing options...
Samuelol Posted December 28, 2016 Share Posted December 28, 2016 That is an absolute beauty. Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted December 28, 2016 Supporters Share Posted December 28, 2016 Never actually seen a sterling (real or airsoft) in anything but plain black. Pretty cool. Link to comment Share on other sites More sharing options...
Brauster Posted January 5, 2017 Share Posted January 5, 2017 It wont be staying like this for long! Monty, proffrink and JamesAirsofterAgent 3 Link to comment Share on other sites More sharing options...
Supporters Monty Posted January 5, 2017 Supporters Share Posted January 5, 2017 Sorry for the huge picture! JamesAirsofterAgent, proffrink and CES_williamson 3 Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now