Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 15/07/24 in all areas

  1. MorganL

    Gun picture thread

    Pinovic and 3 others reacted to MorganL for a topic

    This is my Rifle”
    4 points
  2. Lozart
    Neither have I, I'd still go for an LPVO over a copy DR any day of the week. Needed another pistol. Innit.
    3 points
  3. gavinkempsell
    Does two tone make everything custom these days?
    3 points
  4. DaktariT
    3 points
  5. Tactical Pith Helmet
    Went to a Trump rally this weekend. All I got was this bloody T-shirt...
    3 points
  6. Cr0-Magnon
    Let's face it, most pistols are "upgraded" purely for the sake of messing around with it. If you just want a reliable sidearm for the odd occasion you are close enough and actually remember to use it, then you could get pretty much any of the TM line and stick 0.20's in them. As I say I've got the AA CNC chamber, with stock rubber and nub, plus a 150mm Maple Leaf Crazyjet Barrel. I can hop 0.40's more metres than I'd ever try with a pistol. For use at up to 30M, I've currently set it up for 0.25's (also as this is the weight of the tracer BB's I may eventually use in CQB). I find much heavier and the BB's casually sail through the air, leaving my target plenty of time to duck for cover.
    2 points
  7. Skara
    Is it possible to have a picture of the sector gear? They are usually very hard wearing (esp G&G gears) so unless something has gone horribly wrong I don't see how the sector can get chewed before the piston does... Also, regarding delayers, I would not simply throw one in there and hope for the best, gearbox timing is something a lot of people get wrong and then try all sorts of voodoo magic in a desperate attempt at recovering whatever fps/feeding they lost. Neither of these things is complicated to understand or fix, but both of these things require a minimum of thinking ahead.
    2 points
  8. Shamal
    England have had to turn down a £150 million sponsorship deal with a major dog food manufacturer. An England spokesman said "having Winalot on our kit was taking the piss"
    2 points
  9. Cannonfodder
    I also agree with all the above. If the visor is like the one pictured below I highly recommend getting some glasses or goggles to go underneath as there's some very big gaps where a bb could easily get through. Infact I'd be surprised if a site did let anyone play with just that for eye protection. The only other thing I reccomended is a pair of gloves. Hits to the fingers and knuckles bloody hurt and even a thin pair of gloves will take the edge off
    1 point
  10. JinxDuh
    No, no, it's ✨ c u s t o m ✨
    1 point
  11. Cannonfodder
    That's a very polite way of saying fugly crap scribbled on the side
    1 point
  12. Paineo_3TARGS

    G18c with Roni Kit

    Rollade reacted to Paineo_3TARGS for an advert

    This advert is COMPLETED!

    • For sale
    • As new

    Bought this as a bit of an impulse buy, with the intentions of running it HPA, not seen a game day, used only to chrono and whatnot. Fitted a maple leaf crazy jet barrel with a decepticon bucking and a hadron H arm. Has a Glock extended mag with it. The Glock has a few marks on the back where the charging handle for the kit goes onto it, this is pictured. Goes into the kit easily, just a case of popping two pins out. Looking for 160 postage included, feel free to drop me any messages. Thanks for looking at my ad!

    £160

    1 point
  13. Tackle
    1 point
  14. Sd96

    Idogear ranger green gp pouches

    Tackle reacted to Sd96 for an advert

    This advert is COMPLETED!

    • For sale
    • As new

    Idogear ranger green gp pouches, brand new £20 for both + post and pp fees

    £20

    - GB

    1 point
  15. Shamal
    A bit of advice.... Never read a pop up book about giraffes!
    1 point
  16. MorganL
    My BB bottles with integrated speed loader funnel is complete, the other prints have text on with what’s in the bottles they hold over 5,000BBs.
    1 point
  17. Jez_Armstrong
    Agreed a price and then just ghosted me 🤷
    1 point
  18. theSwede
    Its the same as for glock, 1911 and hi capa. edit: Something like this
    1 point
  19. Skara
    Given a constant velocity, yes. To have a 100% honest reading though, I guess the chrono needs to be setup in a way that the end of the barrel sits in the same exact position every time, relative to the first sensor and then needs to take into account the reduction in velocity given by drag, measured (or calculated) for each bb weight, in relation to the distance between the two sensors. And then everything needs to be certified somehow so that the readings can be used, should the need arise, in legal matters.... Something nobody hopes to resort to.
    1 point
  20. Lozart

    MOSFET / ETU

    Sjkendall reacted to Lozart for a topic

    Looks like the proprietary VFC Avalon ETU.
    1 point
  21. Tackle
    This guys had a valuation & offers to buy from both of us, chooses to ignore messages. Complete timewaster ?
    1 point
  22. Cannonfodder
    1 point
  23. ak2m4
    The general go-to gears are SHS, in your case 18:1's... https://www.ak2m4.co.uk/shs-18-gearset As for the delayer, you can try one I suppose but when you have the gearbox open just check all the compression parts, give everything a good clean and re-grease with some gear and compression lube. As for consistency so many things can affect it, barrel, hop chamber, bucking, nub, nozzle, spring etc. Best to get the gearbox working nicely with the new gears and then go from there. Oh forgot to say, when you have the gearbox open and the new gears fitted it's always best to manually operate the gears with your fingers, this will give you a good idea of how the parts are working together and will show any issues. Be sure to post up pics or video here if you get stuck.
    1 point
  24. Inggrish

    This advert is COMPLETED!

    • For sale
    • Used

    This is a pair of Walther PPQs by Umarex. They are gas blowback pistols, and one has been modified to have a left hand magazine release to be used as a pair. Included is the pistols, original boxes, a spare magazine (so 3 total) , and left and right holsters by Viper. The magazine release can be modified between sides as needed. I would rather sell this as a pair, however if someone wants only the left then I'll happily separate them. These have been barely used, however I have tried to keep a little gas in the magazines. Viewing and pickup in Huddersfield is preferable, but I can dispatch UK too. Any questions please feel free to ask.

    £100

    Huddersfield, West Yorkshire - GB

    1 point
  25. NateChrony
    (full disclosure - I make chronographs) 0.66J vs 1J with 0.28gram is 225fps vs 277fps That's a huge amount of difference in terms of timing. Most of the manufacturing tolerances & timing uncertainty in designs is typically ~10-15fps when shooting 1000fps, with sensor spacing of 50-100mm or so. 50fps at that slow speed is something outside of a chrony's usual issues If it was gas - that could definitely cause an issue, anything that is a liquid & expanding can leave a vapour cloud & cause issues with optical sensors - typically you get high readings as the vapour can move faster than the BB. I'd say the chrony has a fault, take it to the field with you next time & compare side by side to rule out the conditions on the day. You could also possibly open it up & see if you can clean the sensors - cue tip & alcohol should be enough.
    1 point
  26. gavinkempsell
    Sounds like the motor isn't engaging the gears, I'd check to see if the shaft is free spinning, easy to check too... remove the motor and check the cog/gear (whatever the correct name is) is securely attached to the motor shaft.
    1 point
  27. Cannonfodder
    Rifs are banned from being sold on the UK Ebay site
    1 point
  28. Rogerborg
    More likely eBay spotted Assault Style Toys being sold.
    1 point
  29. Galvatron
    https://www.usedairsoft.co.uk/rif-s/electric-powered/krytac-warsport-gpr-cc-assault-rifle_i62502 Sorry, that replica PEQ box won't keep a two-tone Krytac at 75% of its retail price, nor will the RDS do much either. Someone watched too many YouTube videos before getting a UKARA defence sorted out, didn't they?
    1 point
  30. MorganL
    Ebay elcan see what its like, I've got a Eotech clone holographic and just want a little more reach, will see.
    1 point
  31. LukeTunst

    Genuine Eotech 512 2004

    Rollade reacted to LukeTunst for an advert

    This advert is COMPLETED!

    • For sale
    • Used

    Genuine Eotech 512 2004 - £170 Posted Includes printed hexflash Similar to the last ancient Eotech i had, this one has lost some of its brightness gas over the years and is quite hard to see in direct sunlight but is great indoors or whilst reticule is over darker objects Hood is quite beaten up and has quite a lot of delam in the lower 1/3 but does not impact reticule Would suit a CQB/Indoor player or collector

    £170

    1 point
  32. Jamgor82

    G3, MP5/HK53 Wood Handguard

    bax207 reacted to Jamgor82 for an advert

    THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • For sale
    • As new

    1). Original HK G3 Wood Handguard. Unissued condition. £120. 2). Custom made wood handguard for MP5/HK53. Dark walnut wood color. With black enamel painted steel hardware. This handguard is unissued. Only has small storage and handling marks on the metal ware. The surface of the wood is coated with a thin layer of Tru-oil for preservation. £160. Add £5 for tracked shipping. Bank transfer/face to face only because I don't have PayPal.

    £160

    1 point
  33. july_pi

    custom gbb

    johnnyj reacted to july_pi for a topic

    custom gbb workshop SPR MK12 MOD1 WE V3 gbb airsoft deep marking remove original paint gray color lower hydramatic m16a1 lower steel out barrel steel flash hider complete steel trigger box detail fix
    1 point
  34. Colin Allen
    The new site is terrible; the old one was better.
    1 point
  35. Speedbird_666
    Oh my god it's awful. I can't find anything anywhere as easily as the old website. And my wish list was huge - I would frequently use it to list parts for projects, ordering when budget allowed.
    1 point
  36. Skara
    Santa came mega early this year... Sightmark Wraith Mini Thermal riflescope.
    1 point
  37. gavinkempsell

    Gun picture thread

    DanBow reacted to gavinkempsell for a topic

    Can you tell what it is yet? A trip to B&Q and a bit of fettling to be done then... "Build it, they will come".
    1 point
  38. Egon_247

    Gun picture thread

    DanBow reacted to Egon_247 for a topic

    On my quest, still.... Welrod aap. 😁🤣
    1 point
  39. july_pi

    custom gbb

    Ronin0033 reacted to july_pi for a topic

    custom gbb workshop BLACK LAGOON Sword Cutlass WE gbb airsoft deep marking cerakote grip Stainless steel Recoil Spring Guide Stainless steel Magazine Catch Stainless steel Tactical Ring Stainless steel Safety Stainless steel Trigger Lever Stainless steel Slide Stop Stainless steel Disassembling Latch Stainless steel Hammer Stainless steel Trigger Stainless steel Inner Hexagon Grip Screw detail fix
    1 point
  40. july_pi

    custom gbb

    Ronin0033 reacted to july_pi for a topic

    custom gbb workshop B&T APC9
    1 point
  41. Darkmikey22

    Gun picture thread

    Pinovic reacted to Darkmikey22 for a topic

    So it's getting there. Just need to find a way to replicate the correct paint type. And alter the bolt.
    1 point
  42. july_pi

    custom gbb

    Ronin0033 reacted to july_pi for a topic

    custom gbb workshop COBRA(1986) colt mk iv series 80 9mm ARMY gbb airsoft deep marking cerakote grip detail fix
    1 point
  43. july_pi

    custom gbb

    Ronin0033 reacted to july_pi for a topic

    custom gbb workshop colt xm177e2 model 629 ghk gbb airsoft deep marking Receiver color grey m16a1 type upper, lower, grip stock aluminum rubber coated detail fix
    1 point
  44. july_pi

    custom gbb

    Ronin0033 reacted to july_pi for a topic

    custom gbb workshop springfield 1911 loaded kj gbb airsoft deep marking cerakote silver two tone grip stainless steel grip screw detail fix
    1 point
  45. july_pi

    custom gbb

    Ronin0033 reacted to july_pi for a topic

    custom gbb workshop COLT XM177E1 model 609 custom WE gbb V3 airsoft
    1 point
×
×
  • Create New...