Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 17/10/15 in all areas

  1. Sitting Duck

    ICS rail covers

    Think him & Lozart are waiting for sites to do a Star Wars theme instead of the zombie themed games... I could probably turn up as The Emperor as I look like $hit and an old fart btw
    3 points
  2. Tell you what gentlemen, if anyone on here who has had an RIF seized and destroyed by RM, if it was not a gas gun with a mag with the valve fitted (ie just any old AEG), wants to sue, I for one would be willing to donate a few quid towards their legal expenses.
    2 points
  3. Unrustle_Thine_Jimmies runs something similar. Without having tried it myself, I'd tend to agree with Hef: PDI 6.01mm barrel and the softest rubber you can find - either a Prometheus Purple or maybe look into one of those 40 deg rubbers they were selling on ehobbyasia.com and yeah, I'd probably go for R-Hop too, set up for .28g BB Bastards. + Wrap the forward part of the rubber in PTFE tape to get as tight a seal between the barrel, hop chamber, and rubber. & Use a very good piston head O-Ring - Lees Precision Engineering are good (they have an eBay shop) + plenty of CT-2 Teflon grease on the O-ring and inside of cylinder (£4/50g search fleabay) Adding weight to the gun also increases its inertia, which ought to improve accuracy by lessening involuntary movement while pulling the trigger...
    2 points
  4. F2000 I kind of want one but to modify the body like this one if possible; https://www.flickr.com/photos/53780996@N08/5601577033 Yeah P90 is another ugly gun. Good ergonomics though.
    2 points
  5. Best way to upgrade a WE pistol is to buy a TM one :-p
    2 points
  6. Randymanpipe

    Kriss Vector

    I was always told 'every holes a goal' but I think even I would have to draw the line there. Nice analogy though.....
    2 points
  7. Is it weird that I'm semi-erect right now?
    2 points
  8. We all knew there would be pulse rifles. Obviously. Now with added RIS A photo posted by Brownsnout (@neillblomkamp) on Oct 15, 2015 at 11:44am PDT
    1 point
  9. LordGeorge

    The Daytona Build

    Kit is in the UK somewhere so hopefully get that monday/tuesday as planned. while starting the strip down of the receiver, noticed a slight problem with installing a IGL... A lack of holes ! Looks like a vice and drill will be my next best friend! Bit tricky to drill any hole while preserving the thread and the strengh of the grip. Will be much easier to gauge once it all comes.
    1 point
  10. Jedi_Master

    Kriss Vector

    I still like the Kris. I remember being blown away, metaphorically of course, when I first saw one being put through its paces. It is designed well, fits its mission spec, and whether you find it pretty or not is an impressive weapon. Of course, it will never steal my heart away from the MP5.
    1 point
  11. Randymanpipe

    Kriss Vector

    The Tar is beast gun on BF3 though
    1 point
  12. Adam3088

    Kriss Vector

    ..and you said the TAR was ugly?! That thing's horrific.
    1 point
  13. Randymanpipe

    Kriss Vector

    Come to think of it the P90 and F2000 aint no oil paintings either
    1 point
  14. BigAl

    Loadout transporting

    It can be done mate.
    1 point
  15. Yeah I am having it rewired to the same as yours. I bought it with 4 low cap magazines so its 5 in total. I'm going to have some serious fun with it! Cannot wait!
    1 point
  16. sniperslucky

    Kriss Vector

    Indeed, you may say ugly but its the quality that counts . After all when your shot your dead no matter what the gun looks like
    1 point
  17. Jedi_Master

    Kriss Vector

    They all need loving! And if she goes like "a belt fed wombat", then so much the better.
    1 point
  18. Jedi_Master

    ICS rail covers

    Now somthing else to add to my wish list of items to spend my money on :0
    1 point
  19. dex

    Best M4 on market?

    For out of the box performance: with blowback - TM recoil shock, non-blowback- krytac.
    1 point
  20. I was handling a TM shock recoil 417 yesterday at combat south. Oh man it truly is a thing of beauty. It's got all the looks and Hk branding with the knowledge that it has the quality internals to back it up. The 416/417 are far more impressive to look at and handle than the scar-h o L in my opinion. If I was to buy another aeg it would be the 417 fo show
    1 point
  21. Randymanpipe

    ICS rail covers

    Guy iv just bought a red dot and magpul stubby grip runs the facebook page for the guy who makes them. Search for galac-tac Ryan flowers
    1 point
  22. Sorry it took me so long to reply, but it looks like the latch might be bent or isn't sitting where it should properly? It seems to stick out a bit.
    1 point
  23. Sacarathe

    Kriss Vector

    I was still talking about guns.
    1 point
  24. Sacarathe

    Kriss Vector

    You're mixing exotic with ugly.
    1 point
  25. Two of my loadouts I put together recently. First is Digi flora, matched it with my AK just for the extra Russian feeling lol. Second is DPM, (Body armour+PLCE combination). recently scrimmed up the helmet. Not sure if it looks good or not yet.. opinions?
    1 point
  26. Can't see a BB getting through a bike visor. They're small round bits of soft plastic going not very fast.
    1 point
  27. I've got a few bits that might help: First off, the best thing to do is to upgrade your power source (the magazines) here's a few bits: Magazine shims, these'll help with gas efficiency. http://www.leesprecision.com/products/laser-cut-mag-shim-pack-of-4-tokyo-marui-pistols A better quality gas route seal will also help with efficiency, and is easy to install. http://eagle6.co.uk/shop/catalog/product/view/id/573/s/laylax-nineball-magazine-gas-route-seal-aero-packing-2-pcs-for-hi-capa-p226-series/ This tool is essential when replacing o-rings on the gas inlets/outlets incase the magazine happens to leak after a while. http://www.milspecsolutions.co.uk/we-gas-magazine-valve-key-tool.html And we do love o-rings. These are probably better quality than the WE o-rings. http://www.milspecsolutions.co.uk/gas-blowback-parts/Tokyo-Marui-Magazine-Parts.html/Lees-Precision-Tokyo-Marui-Pistol-Magazine-Repair-Kit.html Now, parts for the pistol: The WE bucking is ok, but there are better one's out there, like this one. http://eagle6.co.uk/shop/catalog/product/view/id/570/s/laylax-nineball-wide-use-air-seal-chamber-packing-for-vsr-l96-gbb-series/ Replace the barrel with a tightbore, you'll get a bit of a fps boost and some slightly better range / accuracy, remember to clean it before you put it in your gun. http://eagle6.co.uk/shop/catalog/product/view/id/1479/s/laylax-nineball-6-00mm-power-barrel-97mm-for-g17-g18c-p226-gbb-series/ A stronger recoil and hammer spring will make the gun a lot snappier, if you're not sure about taking your gun apart then avoid this. http://www.zerooneairsoft.com/product_info.php?products_id=3660 Hope that helps.
    1 point
  28. Jedi_Master

    ICS rail covers

    Are yes, the autumn look. I am favouring some nice russet and plum coloured trousers https://s-media-cache-ak0.pinimg.com/236x/f2/1e/d2/f21ed2d3087156d7973e706ec6d9b8d2.jpg
    1 point
  29. 2000 BB Bastard 0.25g x 3 - £32.25 posted ~ icewarriorqueen Abbey Predator Maintenance Gas + Nuprol 3.0 Gas & Nuprol 4.0 Gas - £49.03 posted from patrolbase.co.uk
    1 point
  30. You keep buying other guns because you haven't learnt G&G are shite. 😂
    1 point
  31. or get it built by a mofo best M4 - wow if there was just one clear winner for price, looks, performance, reliabiliity, sex appeal to women THEN WHY THE HECK DO WE ALL KEEP BUYING ALL SORTS OF GUNS ??? to put it another way - if anybody is happy with their particular gun, then to hell with what others think (reality - us big kids will never be happy & truely content, hence the "ooh that looks nice" problem arises time n time again)
    1 point
  32. geoffreym

    Best M4 on market?

    My own personal opinion is that the best m4 is an ICS M4, I'm sure people will comment to the likewise, but my reasoning is that the stock hop unit is really good, the turbo 3000 motor many people seem to "upgrade" too, but they come stock in the newer (I believe post 2008, correct me if I'm wrong) guns. And having owned and abused 3 of them (granted I have sold all of them) the gears have shown literally no sign of fatigue, and I don't think I've ever seen a broken gear set. The split gearbox is just the icing on the cake making repairs a total doddle. My 2p
    1 point
  33. Pros: They are shoot well (hop units are very good) and the externals are pretty good (except the plastics on some of the models), generally reliable out of the box. Cons: They are over priced, especially when you add in the cost of mags. The sop mod batteries are shit and massively over priced. For me the recoil is a gimmick as its more of a tickle. They are a pain in the arse to tech. Spares are expensive. Lack fps out of the box. For me, on balance I don't think they are worth the money, but each to their own.
    1 point
  34. DEF

    Music playlist for airsoft

    Try this version:
    1 point
  35. If you follow the e&l appreciation page on Facebook. Dane the admin on the page will be doing a side by side comparison of his meister arms (exactly the same as Forcecore) with his E&l gen 2. Think he said he's doing the review next week sometime.
    1 point
  36. Jedi_Master

    G36 pouches

    Have you tried looking at Flecktarn.co.uk? They have singles and doubles, etc. Not quite molle but similar. http://www.flecktarn.co.uk/camouflagekit_flecktarn_pouches.html
    1 point
  37. Pretty cool to see somewhere like that in such a well-done film. They dressed the place up nicely. Though watching that was one of those occasions I do kinda wish I wasn't in to airsoft and firearms. Recognising the chinese-made Ops-core clones, GPNVGs, Viper UBACSs and vests as well as all the RIFs etc does kill the illusion a little bit; doesn't stop it being a good short movie though ofc.
    1 point
  38. TheFull9

    Help. Member for AFUK

    Any other link/info on this? Their site currently says the following: http://www.royalmail.com/personal/help-and-support/Tell-me-about-Prohibited-Goods "Weapons: Including Section 5 firearms (e.g. handguns, machine guns), CS gas and pepper sprays, flick knives,and other knives that are banned knives under UK laws, tasers and stun guns. Items that appear to be prohibited weapons may be subject to additional checks and delays. Guns for sporting use, including Section 1 (e.g. hunting rifles), Section 2 (e.g. shotguns) firearms and low-powered air weapons may be sent in compliance with UK law and subject to domestic controls on the possession of firearms. Please see www.royalmail.com/restrictedgoods" "Guns for sporting use: Guns intended for sporting purposes - including Section 1 (e.g. hunting rifles) and Section 2 (e.g. shotguns) firearms, low-powered air weapons and their component parts - may be sent in compliance with UK law and subject to domestic controls on the possession of firearms. Antiques, deactivated and imitation firearms are also permitted. When sending deactivated firearms include proof of deactivation. Items that appear to be prohibited weapons may be subject to additional checks and delays. Please see www.royalmail.com/prohibitedgoods Use 1st Class as the minimum service. The senders name and address must be clearly visible on the outer packaging."
    1 point
×
×
  • Create New...