Cameron364

The 'What have you just bought' Thread

7739 posts in this topic

1 minute ago, GiantKiwi said:

 

Masada uses a proprietary trigger mech which means my only OOTB (ie no modification required) option is the Chimera at the moment. Having used the Gate in another gun, it's got too much going on to be reliable, the first one I used failed after a single day of use.

 

As for the case, i normally use Peli cases, but with my new car, they aren't practical as the boot is rather small, and my last softbag was a £10 one from Taiwangun, so i was more amazed it lasted as long as it did.

I had the Gate Merf 3.2 for quite a while but that bastarding signal wire connector that went into the mosfet was crap and died on me constantly so I decided to get a trigger board hence the Titan but I feel it's good enough to stand up to the BTC from the price that it asks for. I like it because I don't have some board inside my buffer tube that just makes life a hassle.

Share this post


Link to post
Share on other sites

radio license for 5 years.....should make communicating a little easier when out with brother and others in games :D

Share this post


Link to post
Share on other sites

Just brought this little beauty to take me and my armoury skirmishing.....

 

YYfX4UN.jpg

 

MlOOQAM.jpg

 

 

ojtGtme.jpg

 

 

https://m.facebook.com/story.php?story_fbid=1829778020617639&id=1661172140811562

 

There is a video of it running.

 

Picking it up tomorrow I hope!

 

I also brought some Lowa jungle boots for skirmishing, they are awesome.

Talltom, Sico, Dechande and 6 others like this

Share this post


Link to post
Share on other sites

It arrived!

The newly released 7075 aluminium AAC forged receiver for my GHK M4! 

Absolutely stunning. Time to put my M4 back together.

 

20170311_111702.jpg

20170311_111854.jpg

Airsoft_Mr B and GothicGhost like this

Share this post


Link to post
Share on other sites

G & G PDW15 and Pencott Greenzone vest to complete the loadout....... 

IMG_0161.JPG

GothicGhost likes this

Share this post


Link to post
Share on other sites

Bought some clone Springfield Armory wood grips to go with my springfield nova kit.

Really nice nice for £15.

 

The ones are nice as well but I wanted to try some wood grips.

image.jpg

 

Swapped the thumb safety for a single as I did not want to the file the wood and I will probably buy a silver one later.

image.jpg

image.jpg

 

Just waiting on a new silver frame without rails and see how that looks.

Cheers.

DarkAssassin likes this

Share this post


Link to post
Share on other sites

Yesterday was a good day. 

I still need to buy a sight for this. No idea what though. Suggestions welcome. 

 

Krytac lvoa s. Guarder hop rubber. 8 ares amoeba 120 short mid cap mags, krytac patch, cmr rail cover kit, 5000 .28 Valken bb's (are these any good). Viper dump pouch. 

 

 

 

IMG_0956.JPG

GothicGhost and Andyraven like this

Share this post


Link to post
Share on other sites

Sooo very late last night Dave's custom airsoft had a 20% off sale … just waiting for my iron airsoft drum mag now :D

CKinnerley likes this

Share this post


Link to post
Share on other sites
47 minutes ago, sp00n said:

Sooo very late last night Dave's custom airsoft had a 20% off sale … just waiting for my iron airsoft drum mag now :D

 

Blimey - looks like somebody welded a party 7 tin of beer to a short midcap:

showing my age - younger players saying eh? wtf does that mean ???

beer all over the ceiling trying to open the bastid with screwdrivers & $hit

 

drum1.jpg

Hangtight likes this

Share this post


Link to post
Share on other sites

It's a real thing, made by X Products.  They do a standard 50 rnd drum for lots of different guns and that skeletonised version as well.

 

Airsoft companies almost never make up their own sh*t, they just copy stuff from the US gun market that most people don't know about then act like it was their own ideas all along.

Share this post


Link to post
Share on other sites

G&G Gr300 CQB limited edition.

AEG_GG_300_SP_lg.jpg

http://www.evike.com/products/28225/

Got it for nothing because the internals are shot, there is no wire stock, It's also missing a mag release, and bolt release, and the original pistol grip. It's been painted so I have to strip it before I can repaint.

Original parts are pretty comprehensive, Upper, lower, Barrel and handguard, cocking handle. It's super light and most of the main parts are lightweight magnesium casts. It's going to be a nice gun I think. All pins are tight, and everything is a good fit all round.

Ready to go in from spare I have:
New box. (king arms 8mm shell with VFC self shimming gears).
G&G etu trigger and controller.
Solid M16 stock.
ZCI neo motor cage and rewound internals. Might stump up for a faster motor once it's built and I can see if there are any other problems.
416 style pistol grip.
Mag well hand grip.
Red dot.

It's going to be rear wired, with the biggest 11.1 I can get to fit I may even see if I can get a hard shell 4500mAh one to fit. The front handgrip/battery compartment is in good condition and pretty huge internally but I want the weight on my shoulder. I may front wire it again at some point if I get another M4 variant.

GothicGhost likes this

Share this post


Link to post
Share on other sites

Added an ares short foregrip and UFC sight in cantilever mount tomthe krytac today. She's now complete and so is the nigh on £700 dent in my wallet for the last few days of airsoft excess 

Share this post


Link to post
Share on other sites
1 minute ago, clumpyedge said:

A second TM M4 Spomod has just joined the family....whoops

Lovely!

What you doing with this one?!

(What did you do with the first one? lol)

Share this post


Link to post
Share on other sites
Just now, Crashtest33 said:

Lovely!

What you doing with this one?!

(What did you do with the first one? lol)

 

The first sopmod was just bought as a main gun and was for a while after id sold my 416 to fund it but this new sopmod came up as a steal from a friend which has some tasty upgrades and extra's and as id just got a bonus at work I thought sod it and took it off his hands...

 

at present I have...

x2 TM NGRS sopmods and 10 mags between them

TM MP7 with 8 mags

TM Glock 17 with 4 mags

 

I'm feeling a breacher will be next in the kit, but as usual ill probably end up selling something along the way or swapping for something interesting but i have become a bit of a self admitted TM fan boy (whether that's a good or bad thing is yet to be seen - equipment wise its definitely a good thing)

 

Crashtest33 likes this

Share this post


Link to post
Share on other sites
6 minutes ago, clumpyedge said:

 

 but i have become a bit of a self admitted TM fan boy (whether that's a good or bad thing is yet to be seen - equipment wise its definitely a good thing)

 

 

Nowt wrong with that!! They rule!

(Everyone secretly thinks they're the best AEGs. lol)

Share this post


Link to post
Share on other sites
38 minutes ago, Crashtest33 said:

 

Nowt wrong with that!! They rule!

(Everyone secretly thinks they're the best AEGs. lol)

 

Haha well they certainly are from my experience and I've been using them for the best part of 3-4 years.

Crashtest33 likes this

Share this post


Link to post
Share on other sites

Sold a USMC woodland MARPAT FROG set to buy a Peltor Comtac XP headset to try out this comms' lark properly.

 

(Am also selling a Crye Precision labeled USMC desert MARPAT FROG set (M-R) and a Defender USMC woodland MARPAT Inclement Weather jacket (M-L) if anyone is interested? Genuine gear, not copies)

Share this post


Link to post
Share on other sites

Sweet!

 

Optics?

Share this post


Link to post
Share on other sites

So I've been playing with hire guns for 4 months and whilst some are good and some are bad I don't think there is anything that compares with owning your own!

 

Finally bought my own pew pew!

 

  • PDW15-CQB M4 AEG G&G
  • SG P226 PISTOL GBB TOKYO MARUI
  • T1 RED DOT SIGHT
  • RIS FRONT GRIP
  • 3NO FLASH MAGS
  • NX600 LONG LIGHT

 

IMG_3444.JPG

IMG_3445.JPG

IMG_3446.JPG

IMG_3448.JPG

Edited by Alex Whittall
Robert James and Andyraven like this

Share this post


Link to post
Share on other sites

Got myself the faulty Classic Army ISSC MK22 (basically a scar) from action hobbies, and repaired it, the mosfet signal wire had broken, played with it today, it's actually not a bad gun, and the hop is excellent.

ImTriggerHappy likes this

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now