Jump to content

warlord

Members
  • Posts

    389
  • Joined

  • Last visited

  • Days Won

    5
  • Feedback

    0%

Everything posted by warlord

  1. New torch for the Evo. I shopped around looking for an Inforce WMLx clone and saw they now have a Gen2 version. The Gen2 has a few shape changes that I think suit the Evo. I found it on Aliexpres from a supplier called Aimtis - https://www.aliexpress.com/store/2663121 It arrived today but sadly doesn't take my 18650 vape style batteries. Looks like I need to get some C123A's or equivalents. Seems well made. I really like the RIS fixing. It's a spring clamp with a locking screw. So it's super easy to get on and off.
  2. I like that... but without the rds. Like Sigs over Glocks. They just seem to have some style and not like a stamped out rectangle.
  3. I bought my first RIF from them. Then went to buy my second and asked where my point were as I'd spent £400.
  4. And you don't earn loyalty point on the uk site.
  5. More than your £30 sawflys. £45 for the 3 lens kit and another £12 for the foam frame. But because Bolle sent me a free nose piece which arrived today, I effectively have 2 pairs. One sun glasses, one airsoft.
  6. I just received a pair of Bolle Tactical Combats and foam frame to try out for the next game. They have more visibility that the tracker II's - but I still think they're gonna get wet the same. Not mist, but certainly sweaty. As I bought the kit I end up with 3 shades of lens, dark, smoke and clear. I then got the frame so the edges are sealed for airsoft. Not that I think a bb would make it past the glasses as they're very close fitting to the face. Because I have 3 lens a pair of arms and a frame I can use the dark lens as sunglasses and put the smoke into the frame. But the downside is I only have one nose peice so would have to swap that between whichever I'm using. I contacted Bolle to see if they sell the nose piece separately and Becky is sending me one for free - very nice of them.
  7. Many thanks to @ImTriggerHappy the minute my shiny new ASG Scorpion Evo A1 came through the door the 3D printed selector deletes were waiting for it. Not having taken an Evo apart before I found it quite a challenge. There is a good video online by Patrol Base that disassembles one, but it missed out one vital screw - The one inside the trigger guard. To remove the lower receiver you need to: Press out the pin (where the stock clips in when folded) Remove the motor from the hand grip by removing the two outer hex screws (don't touch the big centre hex as that's motor height adjuster) Remove the hand grip. by removing the two hex screws on either side and the four small hex screws from deep inside the grip. Make sure they don't fall into the gearbox! Remove the hex screw inside the trigger guard. You'll want a longish allen key to go through the hole in the hand guard Then pull the lower receiver down and off. You can then position the fire selector(s) so you can get at the tiny hex grub screw that hold them onto the inner gear. Once you have loosened the grub screw the inner gear will pull off and you can then replace the outer selector with the replacement indicator. Take the tiny grub screw from the existing fire select lever and fit it into the 3D printed replacement indicator To get the right one fitted make sure it mirrors the gear positioning and indication mark position of the opposite side Reassemble and take regular deep breaths as you swear about trying to get those four tiny screws back into the hand grip.
  8. I shouldn't have read this post. UPS are supposed to be delivering my Evo today This is going to be the jinx on it. In fact I'll probably get the card through the door whilst I'm typing this Thankfully Shitty Link are gone. When they failed to deliver saying they put a card through my door, I had to go pick it up after finding out I had a missed delivery online. Not possible. I was working outside all day and the driver could not have got to my door without seeing me. So no card was put through. At the collection they said I should have brought the card with me??? What fecking card! Then I had the need for a bill or statement with my address on - all my banking and utilities are paperless and online! They argued about a photo ID on my drivers license AND passport that I'd brought. And the final kicker - I should have put my mobile phone number on the package.... wait WTF? Like I sent it to myself!!!
  9. That does look kinda "interesting". The luxury of an easy to fit lipo in both my AK and M4 makes me spoilt.
  10. Actually the Evo is hideously ugly. But I have and M4 and an AK... so now time for Evo.
  11. I was actually going to sort out the lefty switch ASAP, thanks.
  12. I blame @hagar66 Just ordered an ASG Scorpion Evo 3 A1, mags and case from fire-support. The wife will be very surprised about the competition I've just won
  13. Didn't realise you were on here. I think just bought a Strike Industries Viper stock from you on ebay (y)

    1. ak2m4

      ak2m4

      Hey mate, yeah been on here for years now.   I dip in and out when I have time. 

       

      Also have www.ak2m4.co.uk and on FB :-)

  14. Strike Industries Viper Stock. I got it cheap as it has a slight casting imperfection. Fits well and can still get either of my lipo's into the buffer tube no issue. Still needed to add a short length of velcro soft side into the top to stop it rattling on the buffer tube. But that seems to be necessary on the original QRS stock too.
  15. I figured that an AK should never look factory fresh. So I roughened it up a bit with a foam sanding pad.
  16. Good to know, that's on our site list for in the new year.
  17. Nowt really wrong with multiglam. Just not unique. I've a full loadout too, but now decide to play different. Looks fine to me.
  18. Liking the ageing/wear patina on it.
  19. The Halfords stuff is really sticky and works well. It seems the hooks are harder wearing than much of the stuff on patches etc.
  20. Velcro from Halfords. Use if for patches etc. too. http://www.halfords.com/motoring/paints-body-repair/adhesives/velcro-heavy-duty-stick-on-tape-black
  21. CYMA CM.045C AKS74UN With CYMA ergonomic grip, Nuprol foregrep, Windfire WF501B Red Torch + pressure pad, RDS and Magpul style front sling loop. Took it out today to zero the RDS and just ran it on the NiMH it came with. Just waiting on my AK adapter for the Odin Speedloader.
  22. Nice... but can you even close that case?
  23. It's the wife's birthday today! And look what arrived in the post for her Replaced the grip with an ergonomic one. Feels much better already. Added a new red torch with pressure pad and a foregrip. Also a Magpul style ris sling eye. Foregrip was kinda fun. Had to rethink where the torch was going to go. If the foregrips too far back you can't get a mag in i
  24. Almost identical to the odin - I have both. I'd recommend the nuprol over the odin for value for money. My odin ate the blades of the wheel on it's first outing and odin sent me replacement parts. It was shipped with a clutch that was too tight. In fact I'd even try this for the money! http://www.ebay.co.uk/itm/WoSport-1000rd-M4-BB-Speed-Loader-Airsoft-Quick-Hunting-Magazine-Paintball-Brown/272878869331?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D49129%26meid%3Dee44f3bf4be44bbdad73f1eea1039cff%26pid%3D100005%26rk%3D6%26rkt%3D6%26sd%3D112392504326&_trksid=p2047675.c100005.m1851
×
×
  • Create New...