gavinkempsell Posted February 17 Share Posted February 17 As above, got a few pews before my ukara, meant to be two toned but it never happened. Amokura 1 Link to comment Share on other sites More sharing options...
Spartan09 Posted February 18 Share Posted February 18 well, haven't been keeping up here the past few months, so now time for a shotgun blast.. In November i purchased a Fobus holster for my Cybergun FN Five-seveN along with matching adapters so i can have it as a drop leg fitting or mount it to the MOLLE of my plate carrier, as i intend to start running it more regularly as my john wick hi-cappa is getting a bit war-weary. i also bought a new sling and red dot sight, nothing special. no purchases in December January was just restocking consumables and bought some fill valve pins to replace leaking ones on my APS CAM shotgun shells and finally February has seen me buy a G&G gas Lee Enfield No.4 from OnlyAirsoft, which i have only briefly fielded at the Gaol last weekend to get a feel for it around the outside of the buildings lastly, a Krytac Kriss Vector arrived the other day from land warrior airsoft that i had pre-ordered back in November. annoyingly though, Krytac haven't sent out the spare mags for them yet, so i am waiting for them to arrive before i can use it in anger... though i was shocked at how light the mag that came with the gun is considering its a 60 round gas mag. Nick G, Diemaco, Convert and 1 other 4 Link to comment Share on other sites More sharing options...
Hudson Posted February 19 Share Posted February 19 Picked up a Steyr scout second-hand yesterday. Used to have one, sold it as I had too many bolt actions. Sold most of those, missed the scout and saw this at a good price. Was very dirty inside, missing a screw on the trigger unit, but after a disassemble and cleaning is now running smoothly and putting out 2.2J on a 0.45. Just need to test it out now! gavinkempsell 1 Link to comment Share on other sites More sharing options...
Amokura Posted February 20 Share Posted February 20 After a month of sourcing parts. I have converted this Evo Airsoft AK-104 exterior to the AK-204 model. The handguard was 3D printed. To my understanding, the closest thing to a stock airsoft model is the 2024 ELAK74M3 by E&L. Lozart and gavinkempsell 2 Link to comment Share on other sites More sharing options...
JinxDuh Posted February 20 Share Posted February 20 Picked up a M16A4 from a friend today for a good price, ordered an E&C M16A2 receiver with burst engraved, genuine M16 triangle for an M203, as well as an M203 and old school heat shield. Also bought a Gate Aster to have the burst mode. All of this because I watched Generation Kill again. Jacob Wright, gavinkempsell, The_Roach and 1 other 2 2 Link to comment Share on other sites More sharing options...
gavinkempsell Posted February 20 Share Posted February 20 (edited) Not as cool as JinxDuh's post but my KyAirsoft order arrived today, Quick back story... went to fit an Npas to my Scar-H & found some clot had already tried & failed, guess which spring just got installed & is working perfectly. The mag floor plates unfortunately seem to be for the aeg version & will need a bit of fettling to stay on the mags. Edited February 20 by gavinkempsell Link to comment Share on other sites More sharing options...
The_Roach Posted February 21 Share Posted February 21 On 20/02/2024 at 20:23, JinxDuh said: Picked up a M16A4 from a All of this because I watched Generation Kill again. Funny story but I was an extra on that show. Had a couple of beers with the actual Eric Kocher and met Fruitty Rudy. JinxDuh, Lozart, Egon_247 and 1 other 2 2 Link to comment Share on other sites More sharing options...
JinxDuh Posted February 21 Share Posted February 21 8 minutes ago, The_Roach said: Funny story but I was an extra on that show. Had a couple of beers with the actual Eric Kocher and met Fruitty Rudy. That’s awesome! The_Roach 1 Link to comment Share on other sites More sharing options...
Supporters Lozart Posted February 22 Supporters Share Posted February 22 None more black. (extra points if you get the reference) Link to comment Share on other sites More sharing options...
Popular Post JinxDuh Posted February 22 Popular Post Share Posted February 22 On 20/02/2024 at 17:23, JinxDuh said: Picked up a M16A4 from a friend today for a good price, ordered an E&C M16A2 receiver with burst engraved, genuine M16 triangle for an M203, as well as an M203 and old school heat shield. Also bought a Gate Aster to have the burst mode. All of this because I watched Generation Kill again. I picked up my M16A2 from the tech today, now has an aster for burst mode fitted. Ignore the 416 pistol grip though, I uh... Thought I had one, and had already used it on another build so it's a stand in for testing 😅 Dead happy to have a cool replica. Just have a few small parts to change. It's surprisingly quite comfortable and not too front heavy. Can't wait to field it next month! gavinkempsell, Lozart, The_Roach and 4 others 6 1 Link to comment Share on other sites More sharing options...
ghostwalker Posted February 22 Share Posted February 22 Wolverine mtw forged tactical with 4 extra mags. Been promising myself I would get one and finally have. I think the bank manager just cried into his caviar. Link to comment Share on other sites More sharing options...
gavinkempsell Posted February 22 Share Posted February 22 4 minutes ago, ghostwalker said: Wolverine mtw forged tactical with 4 extra mags. Been promising myself I would get one and finally have. I think the bank manager just cried into his caviar. That was quick... Link to comment Share on other sites More sharing options...
ghostwalker Posted February 22 Share Posted February 22 1 hour ago, gavinkempsell said: That was quick... Quick? Only been pondering it for a year and finally ruled out going the mws route. gavinkempsell 1 Link to comment Share on other sites More sharing options...
Popular Post EDcase Posted February 22 Popular Post Share Posted February 22 (edited) Spent rather too much on this WE M14 but its a beauty (Top image is darker as it shows the 'before' process of weathering) I have modded the trigger group with JB Weld to make it stronger Edited February 23 by EDcase gavinkempsell, Egon_247, Diemaco and 9 others 5 7 Link to comment Share on other sites More sharing options...
Diemaco Posted February 24 Share Posted February 24 Just got a couple of holsters from Taiwangun, nothing too exciting, but I needed them for my WE Glock and my TM Hi-Capa. Also bought one of these mags to test, and am happy to stare they they fit and feed in both my Specna B06 and my ICS L85A2. I'll have to buy a few more now that I know they work! https://www.taiwangun.com/midcap-magazine-aeg/150rd-enhanced-grip-polymer-magazine-for-ar-15-m4-black Link to comment Share on other sites More sharing options...
Egon_247 Posted February 26 Share Posted February 26 Went to the "boot fair" at Driver wood yesterday. Took the youngests' pew and pistol as he's lost interest. Sold them. 😁 Ended up coming home with a CM16, red dot and the eldest boy bought a vorsk eu18. Not sure what I'm going to do with the CM. Maybe a dmr? Dunno. DanBow 1 Link to comment Share on other sites More sharing options...
DanBow Posted February 26 Share Posted February 26 Bought from off here . . . Quick release mag pouches, 4 x M4, 8 x double stack pistol. I've no actual idea what I'm going to do with them though! Egon_247 and gavinkempsell 1 1 Link to comment Share on other sites More sharing options...
Jacob Wright Posted February 28 Share Posted February 28 A very busy and stressful time at work sent me looking for retail therapy, so decided to venture back into the realms of a plate carrier for CQB and games where I don't need to carry as much kit. Picked up a Ferro Slickster and triple 5.56 insert, arrived the next day and really happy with it. It seems comfortable and light, and should be exactly what I'm after Pics to follow once I've had a chance to try it out. gavinkempsell and Enid_Puceflange 2 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted February 28 Share Posted February 28 Joined the gang gavinkempsell and Jacob Wright 1 1 Link to comment Share on other sites More sharing options...
gavinkempsell Posted February 28 Share Posted February 28 1 hour ago, Enid_Puceflange said: Joined the gang what attachments you planned for it? Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted February 28 Share Posted February 28 1 hour ago, gavinkempsell said: what attachments you planned for it? Boomarms mos plate on its way, along with a cutey ikle Trij Sro clone Also just received a Kydex Customs Pro series holster, as the bare bones that I had was exactly that, and wouldn’t accept my qls attachment so as I could easily swap holsters over from my Hi Capa if I felt the need gavinkempsell 1 Link to comment Share on other sites More sharing options...
Supporters sp00n Posted February 28 Supporters Share Posted February 28 Finally bought a TM MTR16 G edition, been after one for ages …. I even have almost all its upgrades waiting (hop arm, hop rubber, buffer, rocket valve, nozzle spring etc) …. Just waiting for the inner barrel, foregrip and short dot to arrive 🤣🤣🤣🤣 if anyone asks, at the time of purchase, I was unsupervised 😉😉 gavinkempsell and Egon_247 2 Link to comment Share on other sites More sharing options...
Supporters Lozart Posted February 29 Supporters Share Posted February 29 15 hours ago, Enid_Puceflange said: Joined the gang It seems fitting that they've packaged it up like an iPhone. Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted February 29 Share Posted February 29 1 hour ago, Lozart said: It seems fitting that they've packaged it up like an iPhone. Packaging probably accounts for 25% of the cost 😂 Lozart 1 Link to comment Share on other sites More sharing options...
Speedbird_666 Posted February 29 Share Posted February 29 Just received one of the new Magpul MOE PR stocks from the US courtesy of Brownells UK. Enid_Puceflange, Tackle, gavinkempsell and 1 other 4 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now