Supporters Adolf Hamster Posted April 26 Supporters Share Posted April 26 1 hour ago, TheFull9 said: had a fair few 'bridges' that were falling to bits and not safe I do enjoy seeing this a lot I have to say. extra points if it's coated in green slime that makes it slippier than ice at the merest hint of moisture TheFull9 and Skullchewer 1 1 Link to comment Share on other sites More sharing options...
Popular Post Skullchewer Posted April 26 Popular Post Share Posted April 26 3 hours ago, TheFull9 said: I hope folks evolve to see that this kinda thing is absolutely up there in terms of what makes (or breaks) their games. Once you get on to a field it is soooo obvious which sites have been maintaining structures and features/replacing stuff that's beyond repair vs ones that just let everything rot forever, tape it off and call that good. Obviously this is not a big money industry so in some instances it's unavoidable or understandable, but since the last place I played had a fair few 'bridges' that were falling to bits and not safe I do enjoy seeing this a lot I have to say. We're doing a lot of maintenance right now. More bridges to come, some structures to be torn down and replaced, some repaired, some new ones. Woodland with a few knackered barricades just doesn't cut it. 1 hour ago, Adolf Hamster said: extra points if it's coated in green slime that makes it slippier than ice at the merest hint of moisture The decking will be gritted and painted, for extra grip. Think skateboard grip tape, on a larger scale. We've had 6 of us jumping down on this one. My welds hold 😉 20240425_150829.mp4 Oh, and I added this today. YARRR! Egon_247, Cocha, The_Roach and 2 others 4 1 Link to comment Share on other sites More sharing options...
Shamal Posted April 26 Share Posted April 26 20 minutes ago, Skullchewer said: We're doing a lot of maintenance right now. More bridges to come, some structures to be torn down and replaced, some repaired, some new ones. Woodland with a few knackered barricades just doesn't cut it. The decking will be gritted and painted, for extra grip. Think skateboard grip tape, on a larger scale. We've had 6 of us jumping down on this one. My welds hold 😉 20240425_150829.mp4 Oh, and I added this today. YARRR! How the heck did that boat get there? You're 30 km from the nearest water lol. Skullchewer 1 Link to comment Share on other sites More sharing options...
Skullchewer Posted April 26 Share Posted April 26 Arrr, tis a whale of a tale to be sure! Enid_Puceflange, Shamal and gavinkempsell 3 Link to comment Share on other sites More sharing options...
gavinkempsell Posted April 26 Share Posted April 26 Just watch out for the Somalian pirates. Shamal and Skullchewer 2 Link to comment Share on other sites More sharing options...
Shamal Posted April 26 Share Posted April 26 37 minutes ago, gavinkempsell said: Just watch out for the Somalian pirates. Well if the Somalian pirates got me they would have to have their wicked way with me cause I would be too weak to fight em off😐. 😂😂 gavinkempsell 1 Link to comment Share on other sites More sharing options...
gavinkempsell Posted April 26 Share Posted April 26 17 minutes ago, Shamal said: Well if the Somalian pirates got me they would have to have their wicked way with me cause I would be too weak to fight em off😐. 😂😂 https://en.wikipedia.org/wiki/Passive-aggressive_behavior Shamal 1 Link to comment Share on other sites More sharing options...
Moderators Jez_Armstrong Posted April 27 Moderators Share Posted April 27 (edited) So I have been really struggling to find a minerva piggyback Placard in stock anywhere, I really liked that some of the UKSF lads had adopted it for holding flashbangs on the front of the mag pouches so because I couldn't find one anywhere I decided to make my own I used an elite spanker triple molle pouch with a pistol pouch front and a thread picker removed the pistol pouches and bought a meter of multicam elastic, I have a girl at work who is a brilliant haberdasher and has done some kit repairs for me in the past so I gave it to her to do for me but unfortunately her machine couldn't get through the thick material so I went to hobbycraft and bought a pack of needles and thick thread and some beer because this was going to take absolutely ages 😂 I'm more than pleased with the outcome it only took about 3 hours of using pliers to ram the needle through and I only stabbed myself about 15 times 😂 Edited April 27 by Jez_Armstrong Cocha, Egon_247, gavinkempsell and 1 other 1 3 Link to comment Share on other sites More sharing options...
Popular Post Skullchewer Posted April 29 Popular Post Share Posted April 29 (edited) Had to keep this under wraps, until after the battlesim. New game objective, find all the components required to launch the rocket, including the nose cone. Edited April 29 by Skullchewer Cannonfodder, The_Roach, Cocha and 3 others 4 1 1 Link to comment Share on other sites More sharing options...
Egon_247 Posted April 29 Share Posted April 29 Pointy is scarier.....😁 Skullchewer 1 Link to comment Share on other sites More sharing options...
Shamal Posted April 29 Share Posted April 29 That's a rip off of thunderbird 3. 😂 Egon_247, Skullchewer, TheFull9 and 1 other 2 2 Link to comment Share on other sites More sharing options...
Skullchewer Posted April 29 Share Posted April 29 55 minutes ago, Shamal said: That's a rip off of thunderbird 3. 😂 THANK YOU! I wanted to paint Thunderburp 3 on the side. Egon_247, Tackle and Shamal 3 Link to comment Share on other sites More sharing options...
Popular Post Cannonfodder Posted April 29 Popular Post Share Posted April 29 Expect a call from Iran asking how quickly you can deliver a few hundred Rogerborg, Skullchewer, Dan Robinson and 3 others 1 5 Link to comment Share on other sites More sharing options...
Skullchewer Posted April 29 Share Posted April 29 42 minutes ago, Cannonfodder said: Expect a call from Iran asking how quickly you can deliver a few hundred Proper loled Link to comment Share on other sites More sharing options...
Cocha Posted May 8 Share Posted May 8 After its first iteration I finally built it as it was meant, pretty satisfied on the looks of it 😍 gavinkempsell 1 Link to comment Share on other sites More sharing options...
Moderators Popular Post Jez_Armstrong Posted May 12 Moderators Popular Post Share Posted May 12 A bunch of fulcrum bangs for the team to use from the back of my rig Should probably pre-warn the wife next time I test them too 😂 20240512_112150.mp4 Caj109, DanBow, gavinkempsell and 4 others 3 3 1 Link to comment Share on other sites More sharing options...
Supporters Rogerborg Posted May 12 Supporters Share Posted May 12 7 hours ago, Jez_Armstrong said: fulcrum bangs Sounds like a 1980s haircut and/or band. What's the mechanism in those? Me, not so much made as slightly tarted. From this gopping abomination... ... to this gopping abomination. Needs more greeblies, weathering and maybe a chonky barrel - although I actually quite like the stubby look, and every gram saved on these is welcome. BigStew, EDcase, Cocha and 1 other 3 1 Link to comment Share on other sites More sharing options...
Moderators Jez_Armstrong Posted May 12 Moderators Share Posted May 12 7 minutes ago, Rogerborg said: Sounds like a 1980s haircut and/or band. What's the mechanism in those? https://www.fulcrumairsoft.com/store/p23/Airsoft_Impact_Flashbang_MK13_Grenade%2C_Twist_Fuze._The_Meteorite_Grenade_System._Olive%2FBlack.html#/ Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted May 13 Share Posted May 13 13 hours ago, Rogerborg said: Sounds like a 1980s haircut and/or band. What's the mechanism in those? Me, not so much made as slightly tarted. From this gopping abomination... ... to this gopping abomination. Needs more greeblies, weathering and maybe a chonky barrel - although I actually quite like the stubby look, and every gram saved on these is welcome. Ahh The Area 66 bridge I couldn’t make it this weekend, now that I’ve got a face to the name, we must’ve played together at some point 👍 Rogerborg 1 Link to comment Share on other sites More sharing options...
Supporters Rogerborg Posted May 13 Supporters Share Posted May 13 15 minutes ago, Enid_Puceflange said: we must’ve played together at some point 👍 Better than playing with yourself. I've not been there for a while but am trying to get back into it as time and fitness allow. I'll generally be in that, or DPM 95 and a TAC-41 (or a tan G36C (or a DMR'd grey Specna SA-02 (or a cut down tan CYMA M516 (or...)))). Enid_Puceflange 1 Link to comment Share on other sites More sharing options...
gavinkempsell Posted May 13 Share Posted May 13 2 hours ago, Rogerborg said: I'll generally be in that, or DPM 95 and a TAC-41 (or a tan G36C (or a DMR'd grey Specna SA-02 (or a cut down tan CYMA M516 (or...)))). I'll be the big fat lad that makes you think... Where the hell did he get kit to wear? or That jacket's a bit tight. Rogerborg 1 Link to comment Share on other sites More sharing options...
HuttArmouries Posted May 13 Share Posted May 13 So in all my various dealings and buying and selling ive ended up with about 30 magazines for the kj works m93r rebranded by si. Minor problem is that noone seems to have one. Ive never seen one in the wild and no one wants to buy the mags. Secondly ive always wanted some sort of little sub machinegun as both a sidearm to my lmgs and as a nice light gun for more compact fields. and so I decided to build one. Ive made a new nozzle to work with these mags but it uses glock rocket valves and piston heads. It blows back already but obviously I cant test feeding or fps yet. Either way I didnt really expect to get it this far but it just worked first time I tested it XD. Im probably gonna go for something like a vz23 with a simple metal tube upper. Eventually a beretta mx4 storm may be on the cards since these are beretta mags. We will see how it goes. Tackle and gavinkempsell 2 Link to comment Share on other sites More sharing options...
Moderators Tackle Posted May 13 Moderators Share Posted May 13 On 12/05/2024 at 11:30, Jez_Armstrong said: A bunch of fulcrum bangs for the team to use from the back of my rig Should probably pre-warn the wife next time I test them too 😂 20240512_112150.mp4 Hey Jez, weren't you doing an electronic sound grenade of some sort, on the back-burner for now ? Link to comment Share on other sites More sharing options...
Moderators Jez_Armstrong Posted May 13 Moderators Share Posted May 13 2 hours ago, Tackle said: Hey Jez, weren't you doing an electronic sound grenade of some sort, on the back-burner for now ? No I finished it, I regularly throw it at people in CQB 😂 Tackle 1 Link to comment Share on other sites More sharing options...
Moderators Tackle Posted May 13 Moderators Share Posted May 13 1 hour ago, Jez_Armstrong said: No I finished it, I regularly throw it at people in CQB 😂 No plans to start knocking them out ?🙏 😉 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now